J47 手工工具 标准查询与下载

KS B ISO 2380-1:2012 螺钉和螺母用装配工具.一字槽螺钉的旋具.第1部分:手动或者机动旋具工作部

이 표준은 수동 및 기계 구동 일자형 스크루드라이버 팁의 호칭, 모양 및 치수에 대하여 규

Assembly tools for screws and nuts-Screwdrivers for slotted-head screws-Part 1:Tips for hand-and machine-operated screwdrivers

ISO 11148-4:2012 手持式非电动工具.安全性要求.第4部分:非旋转冲击动力工具

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “non-rotary percussive power tools”) intended for chipping, riveting, breaking of concrete and asphalt, ramming, etc. The non-rotary percussive power tool can be powered by compressed air, hydraulic fluid or internal combustion engines and is intended for use by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers — breakers; — bush hammers; — chipping hammers; — small chisels; — engraving pens; — needle scalers; — pick hammers; — pile drivers; — portable pile drivers; — punches; — rammers; — riveting hammers; — scaling hammers; — stone hammers; — spades; — tampers. NOTE 1 For examples of non-rotary percussive power tools, see Annex B. This part of ISO 11148 does not cover special requirements and modifications on non-rotary percussive power tools for the purpose of mounting in a fixture. 1 Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of non-rotary percussive power tools in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

ISO 11148-6:2012 手持式非电动工具.安全性要求.第6部分:螺纹结件用装配电动工具

This part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator’s hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers — air-hydraulic impulse wrenches; — impact wrenches; — fastener installation tools; — nutrunners; — open-ended spanners (crow-foot with open-ended socket or tube nut wrench); — ratchet wrenches; — screwdrivers. NOTE 1 For examples of assembly power tools for threaded fasteners, see Annex B. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners

DIN 3223:2012 阀门专用扳手

Handling keys for valves

BS EN ISO 11148-7:2012 手持式非电动工具. 安全要求. 磨床

Hand-held non-electric power tools. Safety requirements Grinders

BS ISO 3316:2012 螺丝和螺母用装配工具.手工操作四角传动套筒扳手用附件.检测和尺寸规格

Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests

GJB 598/26-2020 JY3481装配工具详细规范

Detailed specification of JY3481 assembly tools

ISO 3316:2012 螺钉和螺母用装配工具 手动方榫传动套筒扳手附件 尺寸和试验

This International Standard applies to attachments for hand-operated square drive socket wrenches listed in NOTE 1 The above-mentioned designations correspond to the former designation numbers 203, 204 and 205. It specifies a) the overall dimensions, b) the minimum Rockwell hardness value for their driving squares, c) the method of torque testing, d) the minimum torsional strength values, e) designation, and f) marking. NOTE 2 For the specification of square adaptors with a hexagon or cylindrical flat drive, for power socket wrenches,

Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests

DIN 6911:2012 带导销的六角凹头螺丝扳手

Hexagon socket screw keys with pilot

DIN 3129:2012 螺钉和螺母的装配工具.方头套筒扳手,电动和附件.技术规范和试验扭矩

Assembly tools for screws and nuts - Square drive socket wrenches, power-driven and accessories - Technical specifications and test torques

DIN 1193:2012 钢锤.技术规范

Steel hammers - Technical specifications

DIN 7256:2012 尖錾

Pointed chisels

DIN 6451:2012 扁尖凿

Cape chisels

DIN 7254:2012 泥瓦工用錾子

Mason chisels

DIN 6453:2012 平凿

Flat chisels

DIN 5136:2012 软头锤子.技术规范

Soft-head hammers - Technical specifications

DIN 4000-170:2012 性能表.第170部分:几何断定切口锉刀及粗锉刀

Tabular layouts of properties - Part 170: Files and rasps with geometrically determined cutting edges

ANSI/ASME B18.3-2012 牙槽帽,肩顶,固定螺丝和六角扳手(英制系列)

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

ANSI/ASME B107.110-2012 套筒扳手

Socket Wrenches

ASME B107.110-2012 手握式套筒扳手和附件

This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as tools. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes and lengths Note: This Standard is a consolidation of ASME B107.1, B107.2, B107.10, B107.12, and B107.34.

Socket Wrenches, Handles, and Attachments