J51 机床零部件 标准查询与下载

DIN 2079:1987 机床轴头的7/24锥度

This standard specifies spindle noses for milling machines and boring and milling machines for tool shanks with 7/24 taper and for tools with external centering on outer diameter of the spindle nose.

7/24 tapers for spindle noses for machine tools

BS 6101-4:1987 机床滚珠丝杠.第4部分:静态轴向刚性计算方法

This Part of BS 6101 gives a method of calculating the static axial rigidity of machine tool ball screws. For the purposes of this Part of BS 6101, where the term 'rigidity' is used, it means static axial rigidity. NOTE. The titles of publications referred to are listed on the inside back cover.

Machine tool ball screws - Method of calculation of static axial rigidity

DIN 228-1:1987 莫氏锥体和米制锥体.锥柄

This standard specifies dimensions for morse tapers, metric tapers and taper shanks. It applies to all standardized tools and clamping devices with morse taper, metric taper and taper shank used with or without centralized cooling lubricant feed.

Morse tapers and metric tapers; taper shanks

DIN 228-2:1987 莫氏锥体和米制锥体.锥套

This standard specifies dimensions for morse tapers, metric tapers and taper sockets. It applies to all standardized tool holders with morse taper, metric taper and taper sockets used with or without centralized cooling lubricant feed.

Morse tapers and metric tapers; taper sockets

JIS B 1191:1987 普通滚珠丝杠

Ball screws for general use

DIN 69523:1985 机床.组合部件.滑动台的侧底座.结构尺寸

This German Standard specifies certain dimensions relating to the interchangeability of wing bases for slide units used in special machines constructed from modular units.

Machine tools; modular units; wing bases for slide units; constructional sizes

DIN 69522:1985 机床.组合部件.床身组件的侧底座.结构尺寸

This German Standard specifies certain dimensions relating to the interchangeability to wing bases for columns used in special purpose machines constructed from modular units.

Machine tools; modular units; wing bases for columns; constructional sizes

DIN 69642:1985 机床.标准部件.单心轴端面车削和镗孔加工部件.结构尺寸

This standard specifies dimensions relating to the interchangeability of single spindle facing and boring units used in special purpose machines constructed from modular units.

Machine tools; modular units; single spindle facing and boring units; constructional sizes

BS 4185-13:1985 机床零件.第13部分:埋头孔尺寸规范

Gives dimensions of counterbored holes for use with hexagon socket head cap screws complying with BS 4186 of size ranges from M2.5 to M30.

Machine tool components - Specification for dimensions of counterbored holes

DIN 69611:1984 机床.组合部件.符合DIN 69001的多轴头主轴箱.连接尺寸

Machine tools; modular units; headstocks for multi-spindle heads according to DIN 69001; connecting dimensions

DIN 69001-2:1984 机床.多轴头.外壳尺寸

Machine tools; multi-spindle heads; casing dimensions

DIN 808:1984 机床.万向接头.规格、连接尺寸、负载能力、安装

Machine tools; cardan joints; sizes, connecting dimensions, loading, installation

DIN 69639:1984 机床.操纵极限开关凸轮.尺寸

Machine tools; cams for operating limit switches; dimensionsMachines-outils; cames pour commande des interrupteurs-limiteurs; dimensions

Machine tools; cams for operating limit switches; dimensions

DIN 69638:1984 机床.槽形和槽距.尺寸

Machine tools; slotted profiles and spacing of slots,dimensions Machines-outils; profiles et espacements de rainures, dimensions

Machine tools; slotted profiles and spacing of slots; dimensions

BS 4185-11:1983 机床零件.第11部分:齿轮精度等级推荐规范

Gives recommended grades of accuracy, selected from BS 436-2 for straight spur and single helical gears.

Machine tool components - Recommendations for accuracy grades of gears

ISO 3970:1977/Amd 1:1982 组合机床通用部件 整体导轨立柱 落地式 修改1

This is Amendment 1 to ISO 3970-1977 (Modular units for machine tool construction — Integral way columns — Floor-mounted type)

Modular units for machine tool constructions; integral way columns; floor-mounted type; amendment 1

ISO 2912:1973/Amd 1:1982 组合机床通用部件 多轴端部 箱体和输入轴尺寸 修改1

Figure 2; and table 2: delete the existing figure and table and substitute by the figure and table given.

Modular units for machine tool constructions; multi-spindle heads; casing and input drive shaft dimensions; amendment 1

ISO 2562:1973/Amd 1:1982 组合机床通用部件 滑台 修改1

Page 1, clause 3.1: delete the last sentence "If required, ... numbers"; clause 3.2: the existing text shall be replaced by "The dimensions laid down for the length of the saddle may be decreased by one step using values from the R10 series of preferred numbers." Figure - General dimensions: after "c = multiples of 50 mm", shall be added: "Tolerance on cumulative pitch ?,2 mm".

Modular units for machine tool construction; slide units; amendment 1

JIS B 6109:1982 车床主轴端部及花盘

Spindle noses and face plates of lathes

WJ 337-1982 机床夹具零件和部件 锁紧螺母

Machine tool fixture parts and component lock nuts