J51 机床零部件 标准查询与下载

ISO 3476:1975 组合机床通用部件 安装多轴箱用法兰和传动键

Specifies dimensions of tenon drive and flanges for mounting on quill feed units and quill feed with adjusting slide for tool changing.

Modular units for machine tool construction; Tenon drive and flanges for mounting multi- spindle heads

DIN 8099-2:1975 第2部分:套管拉模芯

Sleeved tube drawing mandrelsMandrins d'étirage de tubes, à fixation mécaniqueZusammenhang mit der von der International Organization for Standardization (ISO) herausgegebenen Norm ISO 1651-1974 siehe Erl?uterungen.Die Hartmetall-Ziehdorne brauchen der

Sleeved tube drawing mandrels

DIN 8099-1:1975 第1部分:铜焊管拉伸心轴

Brazed tube drawing mandrelsMandrins d'étirage de tubes, brasésZusammenhang mit der von der International Organization for Standardization (ISO) herausgegebenen Norm ISO 1651-1974 siehe Erl?uterungen.Die Hartmetall-Ziehdorne brauchen der bildlichen Dar

Brazed tube drawing mandrels

ISO 1651:1974 拔管心轴

Specifies the general dimensions of tube drawing mandrels with respect to their diameter. applies to brazed drawing mandrels and sleeved drawing mandrels. The dimensions have been determined taking existing practice into account as far as possible. Threads are given in both measurement systems (metric and inches) so as to allow the use of these mandrels on any machine.

Tube drawing mandrels

DIN 523:1974 车床心轴.工件装夹用心轴

Lathe mandrelsDrehdorne nach dieser Norm dienen zur Aufnahme von Werkstücken mit Bohrungen, deren Pa?ma?e innerhalb der Toleranzfelder J6, H7 und G6 liegen und deren Bohrungsl?nge nicht gr??er als 1,5 × Bohrungsdurchmesser ist. Dreh-dorne zur Aufnahme vo

Lathe Mandrels; Mandrels for Workpiece-mounting

BS 3884-1:1974 机床的模块标准件.基本组件的规范

Specifies nomenclature, classification and dimensions for interchangeability for principal units including headstocks, slide units, wing bases, columns, spindle units, etc.

Modular units for machine tools - Specification for basic units

ISO 2934:1973 组合机床通用部件 立柱侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machines constructed from modular units. The nominal size of a wing base for columns is given by the nominal width of the saddle on the related slide unit.

Modular units for machine tool construction; Wing base for columns

ISO 2912:1973 组合机床通用部件 多轴端部 箱体和输入轴尺寸

Specifies a range of basic dimensions for multi-spindle heat casings and gives also dimensions for the interchangeability of multi-spindle heat input drive shafts with motor coupling. The nominal size of multi-spindle heads is given by the nominal width of the saddle on the related slide unit.

Modular units for machine tool construction; Multi-spindle heads; Casing and input drive shaft dimensions

ISO 2727:1973 组合机床通用部件 动力箱

Specifies certain dimensions relating to the interchangeability of headstocks used special purpose machines constructed from modular units. Gives furthermore classification and designation.

Modular units for machine tool construction; Headstocks

BS 4185-7:1973 机床零件.第7部分:宽距夹头

Specifies three distinct types and gives dimensions for interchangeability and accuracy requirements. The collets may be used in either lead length or draw-in collet chucks of suitable design and they may be used in various makes of capstan and turret lathes and on single spindle automatic lathes.

Machine tool components - Wide range collets

ISO 2769:1973 组合机床通用部件 滑台用侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for slide units used in special machines constructed from modular units. Gives furthermore nominal size and designation.

Modular units for machine tool construction; wing bases for slide units

ISO 2562:1973 组合机床通用部件 滑台

Specifies certain dimensions relating to the interchangeability of slide units used in special machines constructed from modular units. Gives furthermore the designation and numerical values of nominal sizes.

Modular units for machine tool construction; Slide units

DIN 69052:1971 角导轨

Angular guides Guidages angulairesIn dieser Norm sind die Winkel 50° und 55° mit zugeordneten H?hen und Breiten für die Anwendung bei Führungs-bahnen und Schlitten festgelegt. Sie gelten sowohl für Gleitführungen als auch für W?lzführungen. Die festgele

Angular guides

BS 4185-2:1967 机床零件.第2部分:安装环

Materials, dimensions and tolerances, finish, designation and marking of separate millimetre and inch series, the millimetre series suitable for shafts of diameter 6 mm to 100 mm, the inch series for shafts of diameter $9D in to 4 in.

Machine tool components - Collars

BS 4185-1:1967 机床零件.第1部分:防松螺母("c"型,凹头紧固螺钉锁紧)

Materials, dimensions and tolerances, finish, designation and marking of separate millimetre and inch series, the millimetre series suitable for threaded components of diameter 10 mm to 125 mm, the inch series for those of diameter $9H in to 5 in.

Machine tool components - Locknuts ('C' type, socket set screw locking)

DIN 1808:1964 开尾销用连接套筒

Adaptor Sockets for Cotter Retention

ANSI B5.5-1959 转动气缸和转接器

Obtains interchangeability of different makes of air cylinders in the spindles of machine tools.

Rotating Air Cylinders and Adapters

QJ 1000.95-1986 机床夹具零件及部件工艺卡片 导板

Machine tool fixture parts and components process card guide

QJ 1000.96-1986 机床夹具零件及部件工艺卡片 薄档块

Machine tool fixture parts and components process card thin block

QJ 1000.97-1986 机床夹具零件及部件工艺卡片 厚档块

Machine tool fixture parts and components process card thick block