J54 钻、镗、铣床 标准查询与下载

KS B ISO 2423:2009 摇臂钻床验收条件.精度检验

이 표준은 KS B ISO 230-1을 기초로 하여 암의 높이가 조정 가능한 일반적인 정확

Acceptance conditions for radial drilling machines with the arm adjustable in height-Testing of the accuracy

DIN EN 13128:2009 机床安全性.铣床(包括镗孔机)(含修改件A2-2009).英文版本DIN EN 13128-2009-09

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: -- knee and column type milling machines (see figures C.1, C.2); -- bed-type milling machines (see figure C.3); -- multi-spindle milling machines (see figures C.4 and C.5); -- piano-milling machines (see figures C.4 and C.5); -- profile and contouring milling machines (see figure C.6), -- milling and boring machines (see figure C.7). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)(includes Amendment A2:2009); English version of DIN EN 13128:2009-09

NF E71-213:2009 锤击工具及相关工具缓冲器的尺寸和技术规格

Outillage de martellerie et outillage connexe - Dimensions et spécifications techniques des tamponnoirs

NF E60-421:2009 机床的安全性.铣床(包括镗床)

Safety of machine-tools - Milling machines (including boring machines).

NF E60-421/IN2:2009 机械安全性.工具.铣床(包括镗床)

Safety of machine-tools - Milling machines (including boring machines).

NF E58-250/IN1:2009 钻机.安全性

Drill rigs - Safety.

ISO 13041-3:2009 数控车床和转向中心的试验条件.第3部分:反向垂直工作夹紧锭子机床用几何试验

ISO 13041-3:2008 specifies, with reference to ISO 230-1 and ISO 230-7, the geometric tests on general-purpose, numerically controlled (NC) turning machines and turning centres with inverted vertical workholding spindles, as well as the corresponding applicable tolerances. This part of ISO 13041 presents the different concepts or configurations and common features of NC turning machines and turning centres with inverted vertical spindles. It also provides a terminology and designation of controlled axes. (See Figures 1, 2, 3 and 4.) This part of ISO 13041 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing accuracy.

Test conditions for numerically controlled turning machines and turning centres - Part 3: Geometric tests for machines with inverted vertical workholding spindles

NF E60-164*NF ISO 8636-2:2008 机床.桥式铣床的试验条件.精度测试.第2部分:移动桥式(移动龙门式)铣床

Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 2 : travelling bridge (gantry-type) machines.

JB/T 8357.2-2008 数控立式钻床.第2部分:技术条件

JB/T 8357的本部分规定了数控立式钻床设计、制造和验收的技术要求。 本部分适用于最大钻孔直径小于或等于63mm的数控立式钻床。

Numerical control vertical drilling machines.Part 2: Specifications

JB/T 8648.1-2008 钻削加工中心.第1部分:精度检验

JB/T 8648的本部分规定了钻削加工中心的几何精度检验和工作精度检验的要求及方法。 本部分适用于最大钻孔直径小于或等于4Omm、工作台的工作面宽度为320mm～500mm的立式和卧式钻削加工中心。

Drilling machining centres.Part 1: Testing of accuracy

JB/T 8648.2-2008 钻削加工中心.第2部分:技术条件

JB/T 8648的本部分规定了钻削加工中心制造和验收的要求。 本部分适用于最大钻孔直径不大于40mm、工作台的工作面宽度为320mm～500mm的立式和卧式钻削加工中心。

Drilling machining centres.Part 2: Specifications

JB/T 5564.3-2008 卧式精镗床.第3部分:精度检验

JB/T 5564的本部分规定了卧式精镗床的几何精度和工作精度检验的要求及方法。 本部分适用于工作台面宽度250mm～630mm的单面及双面卧式精铣床。

Horizontal fine boring machines.Part 3: Testing of the accuracy

JB/T 8329-2008 数控床身铣床.技术条件

本标准规定了数控床身铣床的设计、制造和验收要求。 本标准适用于工作台面宽度250mm～1250mm一般用途的普通级和精密级精度的立、卧式数控床身铣床和数控仿形床身铣床。

CNC bed-type milling machines.Specifications

JB/T 8490-2008 落地镗、落地铣镗床.技术条件

本标准规定了落地镗、落地铣镗床制造和验收要求。 本标准适用于镗轴直径130mm～260mm一般用途的普通及数控落地镗床、落地铣镗床。

Specification for floor type boring and milling & boring machines

JB/T 5564.1-2008 卧式精镗床.第1部分:型式与参数

JB/T 5564的本部分规定了卧式精镗床的型式及主参数和连接尺寸参数。 本部分适用于工作台面宽度250mm～630mm的单面和双面卧式精镗床。

Horizontal fine boring machines.Part1:Types and parameters

JB/T 8357.1-2008 数控立式钻床.第1部分:精度检验

JB/T 8357的本部分规定了数控立式钻床的几何精度和工作精度检验的要求及方法。 本部分适用于最大钻孔直径小于或等于63mm的数控立式钻床。

Numerical control vertical drilling machines.Part 1: Testing of the accuracy

NF E60-116-2:2008 机床.测试卧式镗床和铣床精度的试验条件.第2部分:带可移动床身和固定式工作台的镗床和铣床

Machines tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2 : machines with movable column and fixed table.

BS ISO 8636-2:2008 机床.桥式铣床的试验条件.精度测试.移动桥式(龙门式)铣床

This part of ISO 8636 specifies, with reference to ISO 230-1, ISO 230-2, and ISO 230-7, geometric tests, machining tests, and tests for checking accuracy and repeatability of positioning of numerically controlled axes for general-purpose normal accuracy bridge-type milling machines with a travelling bridge (gantry-type). This part of ISO 8636 also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 8636 is applicable to machines with travelling bridge and fixed table. It does not include single-column (open sided) machines and those with fixed bridge and moving tables. This part of ISO 8636 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 8636 provides the terminology used for the principal components of the machines and the designation of the axes with reference to ISO 841.

Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Travelling bridge (gantry-type) machines

JB/T 10818.1-2008 数控定梁龙门雕铣床.第1部分:精度检验

JB/T 10818的本部分规定了数控定梁龙门雕铣床的几何精度、定位精度和工作精度检验的要求及检验方法。 本部分适用于工作台面宽度300mm～1000mm一般用途的普通级和精密级精度的数控定梁龙门雕铣床。

CNC Plano carve-milling machines with a fixed cross rail.Part 1: Testing of the accuracy

JB/T 10818.2-2008 数控定梁龙门雕铣床.第2部分:技术条件

JB/T 10818的本部分规定了数控定梁龙门雕铣床设计、制造和验收的要求。 本部分适用于工作台面宽度300mm～1000mm普通级和精密级精度的数控定梁龙门雕铣床。

CNC Plano carve-milling machines with a fixed cross rail.Part 2: Specifications