J54 钻、镗、铣床 标准查询与下载

JB/T 5763-1991 钻床主轴 技术条件

　　本标准规定了立式钻床和摇臂钻床主轴技术要求。 本标准适用于一般用途的立式钻床和摇臂钻床。

Drilling machine spindle technical conditions

JB/T 5764-1991 台式钻床主轴 技术条件

Specifications for the spindle of the benchtop drilling machine

JB/T 2873-1991 万能工具铣床 参数

本标准规定了万能工具铣床的主参数、加工能力参数和连接尺寸参数。 本标准适用于新设计的、水平工作台面宽度200～630mm一般用途的万能工具铣床。

Universal tool milling machine parameters

JB/T 5765-1991 卧式精镗床 参数

　　本标准规定了卧式精镗床的主参数和加工能力参数。 本标准适用于新设计的单面（型式Ⅰ）和双面（型式Ⅱ）卧式精镗床。

Horizontal fine boring machine parameters

JB/T 5756-1991 台式钻床 主轴端部

本标准规定了台式钻床、通用台式钻床、轻型台式钻床主轴端部的型式与尺寸。 本标准适用于台式钻床、通用台式钻床、轻型台式钻床的主轴。

Bench Drilling Machine Spindle Ends

JB/T 5601-1991 卧式精镗床 系列型谱

　　本标准规定了卧式精镗床的系列构成、用途、性能及结构特征、品种和参数。 　　本标准适用于新设计的单面、双面卧式精镗床。

Horizontal fine boring machine series spectrum

JB/T 5602-1991 落地铣镗床 系列型谱

Floor milling and boring machine series spectrum

JB/T 5564-1991 卧式精镗床 精度

本标准规定了卧式精镗床的几何精度和工作精度的要求及检验方法。 本标准适用于单面及双面卧式精镗床。

Horizontal fine boring machine accuracy

QB/T 1208-1991 回转工作台多工位铣床

Multi-position milling machine with a swiveling table

JB/T 5245-1991 通用台式钻床 精度

本标准规定了通用台式钻床的几何精度和工作精度的检验项目、允差及检验方法。 本标准适用于最大钻孔直径为3~25mm的通用台式钻床。

Universal Bench Drilling Machine Accuracy

JB/T 5246-1991 台式钻床 精度

本标准参照采用国际标准ISO 2773/Ⅰ.Ⅱ-1973《圆柱立式钻床—精度检验》。 本标准规定了台式钻床的几保精度和工作精度的检验项目、允差及检验方法。 本标准适用于最大钻孔直径为3～25mm的台式钻床。

Bench Drilling Machine Accuracy

NF E60-276:1990 机床.噪音测量的常规工作条件.带锯刀的打磨 －切割机床

Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.

BS 4656-37:1989 机床精度及试验方法.第37部分:桥式龙门铣床规范

Geometrical tests and practical tests with reference to BS 3800.

Accuracy of machine tools and methods of test - Specification for plano-milling machines, gantry type

AIA/NAS NAS 911-1990 (Rev. 3)数字控制外壳/剖面铣床

This specification provides a standard for the manufacture, performance, inspection and procurement of a series of numerically controlled, wide bed, vertical spindle, milling machines. These machines w i l l have skin or profile milling capability or both. This standard lists minimum requirements and is not to limit design advances. This specification, as written, depicts a traveling gantry machine but does not preclude a traveling table machine.

Milling Machine - Numerically Controlled Skin/Profile (Rev. 3)

AGMA 90FTM13-1990 端面铣削或端面滚铣

Face milling and face hobbing are the two principal processes used in the production of bevel and hypoid gears. A manufacturer must decide on one or the other. This paper defines the methods and the inherent characteristics they impose on the tooth design and manufacture. Geometric tooth design differences and the reasons for the differences are examined. TCA, finite element analysis and test results for the two processes are included. The cutting processes and cutting tools are compared. The advantages and disadvantages of each process are enumerated. Based on this information and the requirements of the application, a criteria for the selection of one process over the over is proposed.

Face Milling or Face Hobbing

NF E60-165:1989 机床.航空工业用移动式龙门铣床.验收条件.精确度检测

Machine-tools. Portal type plano-milling machines for aeronautical use. Acceptance conditions. Testing of accuracy.

NF E60-164:1988 机床.通用轻便式龙门铣床.验收条件和精确度试验

Machine-tools. Plano-milling machines, portal type. Acceptance conditions and testing of accuracy.

ISO 8636-2:1988 龙门铣床的验收条件 精度检验 第2部分:移动龙门铣床

Specifies the nomenclature used for the principal parts of the machine and the designation of the axes (in English, French and Russian and the equivalent terms in German and Italian) and the geometrical and practical tests for these milling machines, and gives the corresponding permissible deviations which apply to machines of general purpose use and normal accuracy. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine nor to its characteristics which should generally be checked before the accuracy is tested.

Acceptance conditions for plano-milling machines; testing of the accuracy; part 2: gantry-type machines

BS 4656-22:1988 机床精度和测试方法 单柱和双柱立式镗床和车床规范

Accuracy requirements and geometrical and practical tests with reference to BS 3800.

Accuracy of machine tools and methods of test. Specification for vertical boring and turning lathes, single and double column types

NF E60-163:1988 固定龙门铣床.验收条件和精确度检验

MACHINES-TOOLS. PLANO-MILLING MACHINES,GANTRY TYPE. ACCEPTANCE CONDITIONS AND TESTING OF ACCURACY.