J54 钻、镗、铣床 标准查询与下载

ISO 3190:1975 立式转塔和单轴坐标钻床检验条件 精度检验

Specifies both geomertrical and practical tests on these general purpose and normal accuracy drilling machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested. The most common configurations of these machines are given.

Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle; Testing of the accuracy

BS 4656-10:1975 机床精度及试验方法.第10部分:摇臂钻床

Accuracy requirements and geometrical and practical tests referring to BS 3800, for general and normal precision machines.

Specification for the accuracy of machine tools and methods of test - Drilling machines, radial type

DLA MIL-D-80077 B-1975 数字控制的台型滑动刀架,转动架型直立钻床

This specification is approved for use by all Departments and Agencies of the Department of Defense.

DRILLING MACHINES, UPRIGHT, TURRET TYPE, SLIDING HEAD, BED TYPE, NUMERICALLY CONTROLLED

AIA/NAS NAS 994-1975 数字控制铣床适应控制系统

This s p e c i f i c a t i o n provides a standard for the manufacture, performance, r e l i a b i l i t y , inspection, and procurement of an Adaptive Control System (ACS) for Numerically Controlled m i l l i n g machine t o o l s . (Include machine tool d e s c r i p t i o n . ) This standard lists minimum requirements and is not intended to l i m i t design advances.

Adaptive Control System for Numerically Controlled Milling Machines

AIA/NAS NAS 909-1975 (Rev. 3)水平及垂直膝及床类型通用目标铣床

This specification provides a standard for the manufacture, performance, reliability, inspection and procurement of a series of horizontal and vertical spindle milling machines, lmee and bed types, high and low speed. and is not intended to limit design advances. This standard lists

Milling Machines - General Purpose, Knee and Bed Types, Horizontal and Vertical (Rev. 3)

ISO 1701:1974 升降工作台的卧式或立式铣床的试验条件.精度试验

Test conditions for milling machines with table of variable height, with horizontal or vertical spindle; Testing of the accuracy

NAVY AND10387 REV 6-1974 钻头大小和钻孔公差旋转

DRILL SIZES AND DRILLED HOLE TOLERANCES - TWIST

DRILL SIZES AND DRILLED HOLE TOLERANCES - TWIST

BS 4656-11:1974 机床工具的精度及试验方法.落地圆柱立式钻床

Specifies accuracy requirements and geometrical tests with reference to BS 3800. Relates to machines in general use and of normal precision. Does not apply to testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics such as feeds, speeds, etc.

Accuracy of machine tools and methods of test - Drilling machines, vertical floor mounted column and pillar types

ISO 2772-2:1974 方柱立式钻床检验条件 精度检验 第2部分:工作精度检验

Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2772-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.

Test conditions for box type vertical drilling machines; Testing of the accuracy; Part II : Practical test

AIA/NAS NAS 913-1974 (Rev. 4)数字控制压型及作等值线铣床

This specification provides a standard for the namfacture, perfomnance, rellability, inspection and procurement of a series of r e c t w table profile and contour milling machines having two, three, four and five axes of Numerically Controlled motion. and is not intended to l i m i t design advarices.

Milling Machine - Numerically Controlled Profiling and Contouring (Rev. 4)

ISO 2773-2:1973 圆柱立式钻床检验条件 精度检验 第2部分:工作精度检验

Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2773-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.

Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part II : Practical test

DLA MIL-M-23589 B-1973 旋转垂直铣床

This specification covers a floor mounted, vertical , rotary head, high speed, precision milling machine with equipment and accessories as described herein

MILLING MACHINE, VERTICAL, ROTARY

NF E73-414:1973 刻槽穿孔钻

SLOTTING AND BORING BITS.

NF E73-413:1973 双扭钻（带画线器和倒装刀）

TWIST BITS(WITH ADVANCE CUTTING POINTS AND INVERSED KNIFE EDGES).

NF E73-411:1973 铁钻

FERRULING BITS.

ISO 2773-1:1973 圆柱立式钻床检验条件 精度检验 第1部分:几何精度检验

Specifies both geometrical and practical tests on these general purpose and normal accuracy drilling machines, gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which small generally be checked before the accuracy is tested.

Test conditions for pillar type vertical drilling machines; Testing of the accuracy; Part I : Geometrical tests

ISO 2772-1:1973 方柱立式钻床检验条件 精度检验 第1部分:几何精度检验

Specifies both geometrical and practical tests on these general purpose and normal accuracy drilling machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested.

Test conditions for box type vertical drilling machines; Testing of the accuracy; Part I : Geometrical tests

AIA/NAS NAS 914-1973 (Rev. 3)作垂直等值线及压型控制绘图工具铣床

This specification provides a standard for the manufacture, performance, r e l i a b i l i t y , inspection, and procurement of a series of rectangular table profile and contour milling machines having multiple axes of tracer controlled motion. This standard lists minimum requirements and is not t o l i m i t design advances.

Milling Machine - Tracer Controlled Profiling and Contouring-Vertical (Rev. 3)

ASME B5.47-1972 铣床刀杆组件

The standard is confined to milling machine arbors. The reason for confining this standard to this specified milling machine accessory is that through many years of development and general usage, there already exists good agreement on the structure and dimensions of milling machine arbors between competent manufacturers of such equipment here in the United States and abroad. This agreement is much better than for many other milling machine accessories and equipment. Already considerable interchangeability exists between the products of various suppliers of milling machine arbors. The standard tries to avoid being too specific in nonessential details to avoid undue hardship on the manufacturer. The choice of material, heat treatment, surface finish any deviations from nonessential dimensions is left to the discretion of the manufacturer as long as it is compatible with the expected functional requirements of the arbor assembly. The many overlapping and intermediate sizes of the various components of an arbor assembly are minimized for the sake of economy. Some sizes of arbors and components still listed by some manufacturers have been omitted with the knowledge that some other listed sizes would do the required operations without undue hardship.

Milling Machine Arbor Assemblies

ANSI B5.45-1972 铣床

Makes possible the interchangeability of tooling and fixturing between like types and sizes of milling machines.

Milling Machines