J54 钻、镗、铣床 标准查询与下载

ANSI/ASME B5.47-1972 铣床刀杆组件

This standard is confined to milling machine arbors. The reason for confining this standard to this specified mailing machine accessory is that through many years of development and general usage, there already exists good agreement on the structure and dimensions of milling machine arbors between competent manufacturers of such equipment here in the United States and abroad. This agreement is much better than for many other milling machine accessories and equipment. Already considerable interchangeability exists between the products of various suppliers of milling machine arbors.

Milling Machine Arbor Assemblies

ASME B5.18-1972 铣床的轴头和刀柄

This Standard includes tables for Essential Dimensions of Spindle Nose and Tool Shanks; Dimensions of Draw-in Bolt Ends; and Essential Dimensions of Spindle Nose with Large Flanges.

Spindle noses and tool shanks for milling machines

ASME B5.45-1972 铣床

Milling machines

BS 4656-3:1971 机床精度及试验方法.第3部分:卧式或立式平面升降台铣床

Specifies accuracy requirements and geometrical tests with reference to BS 3800. Relates to machines in general use and of normal precision. Does not apply to testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics such as feeds, speeds etc. Appendix C contains terminology that is technically equivalent to ISO 1701/0

Specification for the accuracy of machine tools and methods of tests - Milling machines, knee and column type, horizontal or vertical spindle plain

BS 4656-4:1971 机床精度及试验方法.第4部分:卧式或立式铣床

Specifies accuracy requirements and geometrical tests with reference to BS 3800. Relates to machines in general use and of normal precision. Does not apply to testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics such as feeds, speeds etc. Appendix C gives terminology that is technically equivalent to ISO 1984/0.

Specification for the accuracy of machine tools and methods of test - Milling machines, bed type, horizontal or vertical spindle

NF E66-534:1970 莫氏锥形工具的缩小尺寸转接套筒

Reduction sleeves for morse taper tools.

AIA/NAS NAS 929-1970 (Rev. 2)机件固定器机身晶石铣床性能需求

This specification provides 8 standard for the nirrnaiacture, performance, inspection and procurement of 8 aeries of work holders for ase on airframe spsr milling mechines. standard lists minimum requir-nt8.

Performance Requirement - Work Holder Airframe Spar Milling Machine (Rev. 2)

NF E21-413:1969 平衡曲柄

BALANCED HANDLES.

NF E21-414:1969 操纵轮.通用系列

HAND WHEELS-GENERAL SERIES.

NF E21-411:1969 固定或旋转式手轮曲柄把手和操作杆等把手

FIXED OR ROTATING HANDLES FOR HAND WHEELS,CONTROL LEVERS,ETC.

AIA/NAS NAS 984-1969 水平及垂直膝及床型数字控制铣床

This specification provides a standard f o r the manufacture, performance, inspection, and procurement of a series of numerically controlled, horizontal and v e r t i c a l spindle, knee and bed type p r o f i l e r s . This standard l i s t s minimum requirements and i s not to l i m i t design advances.

Numerically Controlled Milling Machines Knee and Bed Type - Horizontal& Vertical

AIA/NAS NAS 977-1965 高及低速接合滑动桶架/工作台数字控制等高线铣床

Intended Use: aerospace manufacturing industry. It shall provide adequate capacity to perform machining operations (stock removaì) on ferrous and non-ferrous materials. be capable of utilizing a l l commonly used milling cutters for operations such as pocketing, sculpturing , slabbing, detailing, facing, etc. A l l numerically controlled axes of motion shall be automa

Milling Machine, Contour, Numerical Control, Multiaxis, Traveling Gantry/Table, Combination High and Low Speed

ASME B5.11-1964 多轴钻床床头箱的轴头和可调接续器

This standard is to provide the means for individual axial adjustment of drilling, reaming, and tapping tools, etc. in the spindles of single or multiple spindle heads. Further, its purpose is to permit interchangeability of adapters into different manufacturers' machines consistent with necessary accuracy. Its scope is primarily in the medium to large size of drill spindles, i.e. from No. 0 Morse Taper and .375 American Standard Taper through No. 4 American Standard Taper.

Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads One of a Series of Standards for Small Tools and Machine Tool Elements

ANSI/ASME B5.11-1964 多轴钻床床头箱的轴头和可调适配器

Provides the means for individual axis adjustment of drilling, reaming, and tapping tools, etc. in the spindles of single or multiple spindle heads

Spindle Noses and Adjustable Adaptors for Multiple Spindle Drilling Heads

AIR FORCE MIL-M-9915-1961 平面卧式铣床

Provided by IHS No reproduction or networking permitted without license from IHS Not for Resale

MILLING MACHINE, HORIZONTAL, PLAIN AND UNIVERSAL

NF E66-370:1961 带高速钢插头的车削机床.钻屑机床

Turning tools with speed steel inserts. Boring tools.

AIA/NAS NAS 936-1959 水平及垂直轴精密高刚性铣床

COPE-THIS SPECIFICATION ESTABLISHES THE REQUIREMENTS FOR PROCUREMENT OF SELF-PLUGGING BLIND V E T S i W I T t N E WHERE ACCESS TO ONLY ONE SIDE IS AVAILABLE. THESE RIVETS ARE INTENDED FOR USE IN AIRCRAFT STRUCTURAL OR SIMILAR APPLICATIONS.

Milling Machine- Precision Bed-Type Horizontal and Vertical Spindles

AIR FORCE MIL-M-4785-1954 地面装垂直铣床

Scope.- This specification covers both medium and heavy duty, high-speed, vertical milling machines, electric-motor driven, floor mounted, I with equipment and accessories as described herein at the option of the procuring agency. (See 6.2)

MILLING MACHINE, VERTICAL, FLOOR MOUNTED

NAVY AND10303 REV 5-1953 十四型驱动安装检查

INSTALLATION CLEARANCE - TYPE XIV DRIVE

INSTALLATION CLEARANCE - TYPE XIV DRIVE

NAVY AND10320 REV 4-1953 十四型驱动安装检查

INSTALLATION CLEARANCE - TYPE XIII DRIVE

INSTALLATION CLEARANCE - TYPE XIII DRIVE