共找到 1021 条与 锻压机械 相关的标准,共 69 页
JB/T 11812的本部分规定了导轨移动式剪板机的技术要求、试验方法、检验规则、包装、标志与运输。本部分适用于导轨移动式剪板机(以下简称剪板机)。
Movable plate shears.Part 2: Specifications
JB/T 11813的本部分规定了纵剪机的技术要求、试验方法、检验规则、包装、标志与运输。本部分适用于纵剪机。
Slitting shears.Part 2: Specifications
JB/T 11813本部分规定了纵剪机的精度。本部分适用于纵剪机。
Slitting shears.Part 3: Testing of accuracy
JB/T 11812的本部分规定了移动式剪板机的型式和基本参数。本部分适用于具有平移导轨的移动式剪板机。
Movable plate shears.Part 1: Type and basic parameters
JB/T 11812的本部分规定了移动式剪板机的几何精度、工作精度及其检验方法。本部分适用于移动式剪板机(以下简称剪板机)。
Movable plate shears.Part 3: Testing of accuracy
JB/T 11813的本部分规定了纵剪机的型式和基本参数。本部分适用于纵剪机。
Slitting shears.Part 1: Type and basic parameters
JB/T 11871的本部分规定了数控卷簧机的技术要求、试验方法、检验规则、包装、标志、运输与贮存。本部分适用于双工位和多工位数控卷簧机。
CNC spring coiling machine.Part 2: Specifications
JB/T 11871的本部分规定了数控卷簧机的几何精度、工作精度及检验方法。本部分适用于材料截面直径小于或等于20 mm的双工位、多工位数控卷簧机。
CNC spring coiling machine.Part 3: Testing of the accuracy
JB/T 11870的本部分规定了重型弯管机的技术要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于金属管材在冷态下弯曲的缠绕式重型弯管机(以下简称弯管机)。
Heavy duty pipe bender.Part 2: Specifications
JB/T 11870的本部分规定了重型弯管机的基本参数。本部分适用于金属管材在冷态下弯曲的缠绕式重型弯管机。
Heavy duty pipe bender.Part 1: Parameters
JB/T 11870的本部分规定了重型弯管机的一般要求、几何精度和工作精度。本部分适用于金属管材在冷态下弯曲的缠绕式重型弯管机。
Heavy duty pipe bender.Part 3: Testing of the accuracy
本标准规定了冰箱侧板钣金成型线的术语和定义、型号、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于厚度尺寸为0.35 mm~0.60 mm的冰箱侧板钣金成型线。
Side panel forming line for refrigerator.technique specifications
本标准规定了机械压力机用安全双联电磁阀的术语和定义、型号与名称、要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于以压缩空气为工作介质的机械压力机用安全双联电磁阀(以下简称安全双联阀)。
Safety double solenoid valve for mechanical presses.Specification
本标准规定了粉末制品液压机精度检验项目、公差及检验方法。本标准适用于框架式和四柱式结构型式的粉末制品液压机。本标准不适用于侧压式粉末制品液压机。
Powder product hydraulic press.Testing of the accuracy
本标准规定了手动压力机的技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于手动压力机。
Manual press
本标准规定了螺旋压力机铜螺母的合金牌号、技术要求、试验方法、验收规则、标志、贮存、包装与运输。本标准适用于用铸造方法生产的螺旋压力机用铜螺母(以下简称铜螺母)。
Copper alloy nuts of screw presses.Specification
JB/T 11871的本部分规定了数控卷簧机的型式与基本参数。本部分适用于新设计的冷卷双工位及多工位的数控卷簧机。
CNC spring coiling machine.Part 1: Types and basic parameters
La présente Norme internationale spécifie les dimensions de base, en millimètres, des doigts de démoulage à tête cylindrique (type A) et des doigts de démoulage à corps droit (type B), destinés à être utilisés dans les moules sous pression et les outillages de moulage (un exemple d'application est représenté à la Figure 1).Elle spécifie également le matériau, la dureté et la désignation de ces doigts de démoulage (type A et B).
Tools for moulding - Angle pins
Tools for pressing. Guide bushes. Form B, ball cage bushes, plain, type 2
Tools for pressing. Guide bushes. Form C, gliding bushes, headed, type 1
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号