J62 锻压机械 标准查询与下载

ISO 9182-4:2013 冲压工具.导柱.第4部分:C型、带套的锥头导柱

This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type C, with taper lead and bush, intended for use in press tools. It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this part of ISO 9182.

Tools for pressing.Guide pillars.Part 4: Type C, pillars with taper lead and bush

ISO 9182-3:2013 冲压工具.导柱.第3部分:B型、端锁紧导柱

This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type B,intended for use in press tools. These guide pillars can be end-locking, type B1 (see Figure 1), or endlocking with lubrication grooves, type B2 (see Figure 2). It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this part of ISO 9182.

Tools for pressing.Guide pillars.Part 3: Type B, end-locking pillars

ISO 9182-1:2013 冲压工具.导柱.第1部分:型式

This part of ISO 9182 illustrates four main types of guide pillars and their methods of mounting.

Tools for pressing.Guide pillars.Part 1: Types

ISO 9182-5:2013 冲压工具.导柱.第5部分:D型、带法兰的端锁紧导柱

This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type D, end-locking pillar with flange, intended for use in press tools. It gives guidance on the materials and specifies the hardness and the designation of guide pillars which meet the requirements of this part of ISO 9182.

Tools for pressing.Guide pillars.Part 5: Type D, end-locking pillars with flange

ISO 9448-1:2013 冲压工具.导套.第1部分:型式

This part of ISO 9448 establishes a classification and an identification of guide bushes for press tools. It covers seven main forms of guide bushes and their methods of mounting.

Tools for pressing.Guide bushes.Part 1: Forms

ISO 9448-8:2013 冲压工具.导套.第8部分:G型、带台滑动导套、1型

This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form G, stepped gliding bushes, type 1, intended for use in press tools and to be mounted in the clamp plate with interference fit over a certain length. The remaining portion of the length ensures the guiding. The bushes are provided with a clearance for lubrication. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448.

Tools for pressing.Guide bushes.Part 8: Form G, gliding bushes, stepped, type 1

ISO 9448-4:2013 冲压工具.导套.第4部分:C型、带头滑动导套、1型

This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form C, headed gliding bushes, type 1, intended for use in press tools and to be mounted in the clamp plate with transition fit and fixed to the plate by means of screws. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448.

Tools for pressing.Guide bushes.Part 4: Form C, gliding bushes, headed, type 1

ISO 9448-11:2013 冲压工具.导套.第11部分:F型、法兰滚珠导套、2型

This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form F, flanged ball cage bushes, type 2, intended for use in press tools and to be mounted in the clamp plate with transition fit and fixed to the plate by means of guide clamps. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448.

Tools for pressing.Guide bushes.Part 11: Form F, ball cage bushes, flanged, type 2

ISO 9448-5:2013 冲压工具.导套.第5部分:D型、带头滚珠导套、1型

This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form D, headed ball cage bushes, type 1, intended for use in press tools and to be mounted in the clamp plate with transition fit and fixed to the plate by means of screws. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448.

Tools for pressing.Guide bushes.Part 5: Form D, ball cage bushes, headed, type 1

ISO 9448-10:2013 冲压工具.导套.第10部分:E型、法兰滑动导套、2型

This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form E, flanged gliding bushes, type 2, intended for use in press tools with guide pillars with a tolerance on d1 of g6 according to ISO 9182-3, and to be mounted in the clamp plate with transition fit and fixed to the plate by means of guide clamps. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448.

Tools for pressing.Guide bushes.Part 10: Form E, gliding bushes, flanged, type 2

SN/T 0813.2-2013 进出口锻压机械检验规程 第2部分:板料折弯机

SN/T 0813的本部分规定了进出口板料折弯机的抽样、检验和检验结果判定。本部分适用于金属板料折弯加工用途的进出口板料折弯机的柃验。

Rules for the inspection of metalforming machine for import and export.Part 2:Press brake

JB/T 11592-2013 冷轧金属板带精整剪切成套装备 纵切生产线

本标准规定了金属带材纵切分条、检查、卷取生产线成套装备的基本参数、技术要求、设备组成与功能、检验规则、检验(试验)方法、包装、标志、运输和贮存。本标准适用于生产线中心线作为板带运行基准,带厚0.18 mm~3.0 mm、抗拉强度≤1 000 MPa的金属带材纵切生产线成套装备,其他规格产品也可参照使用。

Finishing-shearing equipment set for cold rolling strip.The slitting line

JB/T 11634-2013 板料折弯机用上折弯模

本标准规定了板料折弯机用上折弯模的要求、试验方法、检验规则、标志、包装、运输和贮存、本标准适用于板料折弯机用上折弯模(以下简称上模)、

Up tools for press brake

JB/T 11591-2013 冷轧金属板带精整剪切成套装备 重卷生产线

本标准规定了金属带材重卷、切边、检查、分卷生产线成套装备的基本参数、技术要求、设备组成与功能、检验规则、检验(试验)方法、包装、标志、运输和贮存。本标准适用于生产线中心线作为板带运行基准,带厚0.18 mm~3.0 mm、抗拉强度≤1 000 MPa的金属带材重卷生产线成套装备,其他规格产品也可参照使用。

Finishing-shearing equipment set for cold rolling strip.The recoiling line

JB/T 11598-2013 废边卷取机 技术条件

本标准规定了废边卷取机的技术要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于冶金设备移动卷轴式和推笼式废边卷取机。

Scrap baller.Technical requirements

JB/T 11590-2013 冷轧金属板带精整剪切成套装备 横切生产线

本标准规定了金属板带横切、切边、检查、分选、堆垛生产线成套装备的基本参数、技术要求、设备组成与功能、检验规则、检验(试验)方法、包装、标志、运输和贮存。本标准适用于生产线中心线作为板带运行基准,带厚0.18 mm~3.0 mm,抗拉强度≤1 000 MPa的金属板带横切生产线成套装备,其他规格产品也可参照使用。

Finishing-shearing equipment set for cold rolling strip.The cut-to-length line

JB/T 11585-2013 冷轧圆盘剪

本标准规定了冷轧纵切圆盘剪和冷轧切边圆盘剪的型号、规格、基本参数、技术要求、检验规则、检验(试验)方法、标志、包装、运输和贮存。本标准适用于厚度为0.18 mm~3.0 mm,抗拉强度≤1 000 MPa的冷轧带材纵切圆盘剪和切边圆盘剪。

Disc shears for cold rolling strip

JB/T 11635-2013 板料折弯机用下折弯模

本标准规定了板料折弯机用下折弯模的要求、试验方法、检验规则、标志、包装、运输和贮存、本标准适用于板料折弯机用下折弯模(以下简称下模)、

Under tools for press brake

BS ISO 23480:2013 冲压工具.滑床台

Tools for pressing. Sliding plates

ISO 23480:2013 冲压工具.滑床台

This International Standard specifies the main dimensions and tolerances of sliding plates, to be used in press tools (an application example is shown in Figure 1). It also specifies the designation of sliding plates. Key 1 sliding plates, type A 2 sliding plates, type B Figure 1 — Application example of sliding plates

Tools for pressing - Sliding plates