J62 锻压机械 标准查询与下载
共找到 1021 条与 锻压机械 相关的标准，共 69 页
本标准规定了异形曲面快速成形机的术语和定义、型式与参数、技术要求、检验规则、标志、包装、随机技术文件、运输和贮存。 本标准适用于异形曲面快速成形机。
Universal profile former
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了板料折弯机用数控系统的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于配套板料折弯机使用的数控系统。
Numerical control system for press brakes
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了辊锻机的参数。本标准适用于热态辊锻的辊锻机。
Forging roll machine.Part 1: Parameter
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本部分规定了金属打包液压机的技术要求、检验或试验方法、检验规则、标志、包装、运输和储存。本标准适用于将各种轻薄型生产和生活废钢、各种塑性较强的有色金属（如铝合金、铜材）打包的金属打包液压机（以下简称打包机）。
Hydraulic scrap baling presses.Part 2: technical requirements
- ICS
- 23.120.10
- CCS
- J62
- 发布
- 2012-05-24
- 实施
- 2012-11-01
Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding; Amendment 1
- ICS
- 01.070;25.120.10
- CCS
- J62
- 发布
- 2011-12
- 实施
Machine tools - Safety - Hydraulic presses.
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-11-01
- 实施
- 2011-11-05
Machine tools - Safety - Hydraulic presses.
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-11-01
- 实施
This standard specifies technical safety requirements and measures to be asopted by persons undertaking the design (as defined in 3.11 of EN 292-1-1991)manufacture and supply of hydraulic presses which are intended to work cold metal or material partly of cold metal.
Machine tools - Safety - Hydraulic presses; German version EN 693:2001+A2:2011
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-11
- 实施
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further in SAE J737, J739 and J1304. End bits are further defined in SAE J63.
Countersunk Square Holes for Cutting Edges and End Bits
- ICS
- 43.080.99;53.100;65.060.01
- CCS
- J62
- 发布
- 2011-10-25
- 实施
- 2013-09-13
Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008)
- ICS
- 25.060.10;25.120.10
- CCS
- J62
- 发布
- 2011-10
- 实施
Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
- ICS
- 25.060.10;25.120.10
- CCS
- J62
- 发布
- 2011-10
- 实施
Tools for pressing. Punch holder shanks. Type A
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-09-30
- 实施
- 2011-09-30
Press tools for tablets - Punches and dies
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-09
- 实施
Tools for pressing - Wear plates for press dies - Part 2: Type B
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-09
- 实施
Tools for pressing - Punch holder shanks - Part 1: Type A
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-09
- 实施
JB/T 5247的本部分固定了台式压力机（包括精密台式压力机）精度检验的基本要求、公差及检验方法。 本部分适于台式压力机（以下简称压力机）。
Bench mechanical power presses.Part 3: Testing of the accuracy
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 5247的本部分固定了台式压力机的型式及基本参数。 本部分适用于新设计的一般用途双柱组合式和固定台式两种台式压力机（以下简称压力机）。
Bench mechanical power presses.Part 2: Types and basic parameters
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了水平下调式单辊卷板机的术语和定义、技术要求、试验方法、检验规则、包装、标志与随机技术文件。 本标准适用于水平下调式单辊卷板机（以下简称卷板机）。
Three-roll bending machine with bottom rollers horizontal adjustment
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了锻压机械用钢铁铜衬复合件的分类、技术要求、试验方法、验收规则、标志与证明。 本标准适用于锻压机械中用离心铸造方法生产的钢铁铜衬复合件（以下简称复合件）。
Steel-body copper-bushing compound parts for metalforming machinery.Specification
- ICS
- 25.120.10
- CCS
- J62
- 发布
- 2011-05-18
- 实施
- 2011-08-01
