J62 锻压机械 标准查询与下载

DIN EN 693:2009 机床安全性.液压冲床,德语版EN 693:2001+A1:2009

1.1 This standard specifies technical safety requirements and measures to be adopted by persons undertaking the design (as defined in 3.11 of EN 292-1:1991), manufacture and supply of hydraulic presses which are intended to work cold metal or material partly of cold metal. 1.2 This standard also covers presses, whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal powder. 1.3 The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. This standard presumes access to the press from all directions, deals with the hazards described in clause 4, and specifies the safety measures for both the operator and other exposed persons. 1.4 This standard also applies to ancillary devices which are an integral part of the press. For the safeguarding of integrated manufacturing systems using presses, see also ISO 11161. 1.5 This standard does not cover machines whose principal designed purpose is: a) sheet metal cutting by guillotine; b) attaching a fastener, e.g. riveting, stapling or stitching; c) bending or folding; d) straightening; e) turret punch pressing; f) extruding; g) drop forging or drop stamping; h) compaction of metal powder; i) single purpose punching machines designed exclusively for profiles, e.g. for the construction industry. 1.6 This standard is applicable to machines built after its date of issue.

Machine tools - Safety - Hydraulic presses(includes Amendment A1:2009); English version of DIN EN 693:2009-11

DIN EN 692:2009 机床.机械压力机的安全,德文版本 EN 692:2005+A1:2009

1.1 This European Standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of mechanical presses with part revolution clutch hereinafter called presses which are intended to work cold metal or material partly of cold metal. NOTE The design of a machine includes the study of the machine itself, taking into account all phases of its "life", i.e. construction, transport and commission (including assembly, installation and adjustment), use (including setting, teaching/programming or process changeover, operation, cleaning, fault finding and maintenance) and de- commissioning, dismantling and, as far as safety is concerned, disposal, and the drafting of the instructions related to all above-mentioned phases of the "life" of the machine (except construction), dealt with it in 6.5 of EN ISO 12100-2:2003. 1.2 This European Standard also covers presses, whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal powder. 1.3 The requirements in this standard take account of intended use, as defined in 3.22 of EN ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other exposed persons. 1,4 This European Standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately. 1.5 This European Standard does not cover mechanical presses with full revolution clutch. 1.6 This European Standard does not cover machines whose principal designed purpose is: a) sheet metal cutting by guillotine; b) attaching a fastener, e.g. riveting, stapling or stitching; c) bending or folding; d) straightening; e) turret punch pressing; f) extruding; g) drop forging or drop stamping; h) compaction of metal powder: i) single purpose punching machines designed exclusively for profiles, e.g. for the construction industry. 1.7 This European Standard is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Machine tools - Mechanical presses - Safety(includes Amendment A1:2009); English version of DIN EN 692:2009-10

JIS B 6410:2009 冲压加工机械.伺服压力机的安全性要求

Presswork machinery -- Safety requirements of servo presses

BS ISO 10242-3:2008 冲压工具.冲头柄.D型

Tools for pressing - Punch holder shanks - Type D

BS ISO 10242-2:2008 冲压工具.冲头柄.C型

Tools for pressing - Punch holder shanks - Type C

NF E63-023/IN1:2009 机床的安全性.气动压力机

Safety of machine tools - Pneumatic presses.

NF E63-023:2009 机床的安全性.气动压力机

Safety of machine tools - Pneumatic presses.

NF E63-021/IN1:2009 机械工具.安全性.液压

Machine tools - Safety - Hydraulic presses.

NF E63-020:2009 机床.机械压力.安全性

Machine tools - Mechanical presses - Safety.

NF E63-021:2009 机床.安全性.液压冲床

Machine tools - Safety - Hydraulic presses.

NF E63-020/IN1:2009 机械工具.机械压力.安全性

Machine tools - Mechanical presses - Safety.

BS ISO 10071-1:2008 冲压工具.球锁紧的冲头.轻型球锁紧冲头

Tools for pressing - Ball-lock punches - Ball-lock punches for light duty

BS ISO 11903:2008 冲压工具.导柱安装指南

Tools for pressing - Guide pillar mountings

NF E63-107:2008 冲压工具.带法兰缘冲头的矩形定位器和冲击板.底部固定

Tools for pressing - Rectangular retainers and backing plates for flanged punches - Bottom fixing.

NF E63-108:2008 冲压工具.带法兰缘冲头的方形定位器和衬板.底部固定

Tools for pressing - Square retainers and backing plates for flanged punches - Bottom fixing.

NF E63-141:2008 冲压工具.弹簧起模器

Tools for pressing - Spring ejector.

BS ISO 11900-2:2008 冲压工具.球形锁紧冲头固定板.轻型用减径C和D型固定板

Tools for pressing - Ball-lock punch retainers - Types C and D, reduced for light duty

ISO 11903:2008 冲压工具.导柱安装指南

This International Standard specifies the dimensions and tolerances, in millimetres, of guide pillar mountings intended for mounting with or without guide bush. It also specifies the material and the designation of guide pillar mountings that are in accordance with its specifications.

Tools for pressing - Guide pillar mountings

ISO 11900-2:2008 冲压工具.球形锁紧冲头固定板.第2部分:轻型用减荷的C和D型固定板

Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty

ISO 10071-1:2008 冲压工具.球形锁紧冲床.第1部分:轻型球形锁紧冲床

Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty