J62 锻压机械 标准查询与下载

BS ISO 6752:2008 冲压工具.带60°圆锥头和直柄的圆冲头

Tools for pressing - Round punches with 60 degrees conical head and straight shank

NF E63-146:2008 冲压工具.凸轮传动板

Tools for pressing - Cam driver plates.

NF E63-145:2008 冲压工具.滑床台

Tools for pressing - Sliding plates.

BS ISO 23481:2008 冲压工具.凸轮传动板

Tools for pressing - Cam driver plates

BS ISO 16366:2008 冲压工具.L形导向器

It specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools. It also specifies the designation of L-shaped guiding bars.

Tools for pressing - L-shaped guides

BS ISO 9183-1:2008 冲压工具.冲压模磨板.A型

ISO 9183-1:2007 specifies the basic dimensions and tolerances in millimetres of wear for press dies, type A, intended for use mainly in large press dies. It also specifies the size and positions of the clearance holes for attachment. ISO 9183-1:2007 gives material indications, and specifies the designation of wear plates for press dies, type A, which meet the requirements of this part of ISO 9183. Two thicknesses of this type of wear plate are specified: type A1, with a thickness, t, of 20 mm, and type A2, with a thickness, t, of 12 mm.

Tools for pressing - Wear plates for press dies - Type A

BS ISO 16367:2008 冲压工具.导向板.U形和V形板块

It specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also specifies the designation of U- and V-blocks.

Tools for pressing - Guide plates - U- and V-blocks

ISO 23480:2008 冲压工具.滑床台

This International Standard specifies the main dimensions and tolerances of sliding plates, to be used in press tools (an application example is shown in Figure 1). It also specifies the designation of sliding plates.

Tools for pressing - Sliding plates

ISO 23481:2008 冲压工具.凸轮传动板

This International Standard specifies the main dimensions and tolerances of plates to be used for cam drivers and slides in tools for pressing (an application example is shown in Figure 1). It also specifies the designation of cam driver plates.

Tools for pressing - Cam driver plates

ISO 16367:2008 冲压工具.导向板.U形块和V形块

This International Standard specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also specifies the designation of U- and V-blocks.

Tools for pressing - Guide plates - U- and V-blocks

ISO 16366:2008 冲压工具.L形导向器

This International Standard specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools (an application example is shown in Figure 1). It also specifies the designation of L-shaped guiding bars.

Tools for pressing - L-shaped guides

GOST R 53010-2008 液压机.安全要求

Hydraulic presses. Safety requirements

GOST R 52915-2008 自动和半自动金属制造机械.安全要求

Automatic and semi-automatic metalforming machines. Safety requirements

SN/T 0813.3-2007 进出口锻压机械检验规程第3部分:折弯纵剪机

SN/T 0813的本部分规定了进出口折弯纵剪机的抽样、检验及判定。 本部分适用于最大折弯纵剪机厚度不超过3mm钢板进出口折弯纵剪机的检验。

Rules for the inspection of metalforming machine for import and export.Part 3:folder and slitter

KS B ISO 6899:2007 前开式机械压力机.精度检验

이 규격은 KS B ISO 230-1에 기초하여 기계 프레스의 정밀도 검사 및 각 검사 항

Acceptance conditions of open front mechanical power presses-Testing of the accuracy

KS B ISO 9183-1:2007 冲压工具.冲压模磨板.第1部分:A型

이 규격은 대형 프레스 금형에 사용되는 웨어 플레이트에 대해서 규정한다. 또한 부착을 위한

Tools for pressing－Wear plates for press dies－Part 1：Type A

KS B ISO 9183-2:2007 冲压工具.冲模耐磨板.第2部分:B型

이 규격은 대형 프레스 금형에 사용되는 웨어 플레이트에 대해서 규정한다. 또한 부착을 위한

Tools for pressing－Wear plates for press dies－Part 2：Type B

KS B ISO 11900-1:2007 冲压工具.球锁紧凸模固定板.第1部分:小功率用A型和B型、矩形和正方形固定板

이 규격은 강판에 구멍을 뚫을 때 사용하도록 KS B ISO 10071-1에 규정한 볼 로

Tools for pressing－Ball-lock punch retainers－Part 1：Types A and B, rectangular and square for light duty

KS B ISO 10071-2:2007 冲压工具.球形锁紧冲床.第2部分:用于重载荷的球形锁紧冲床

이 규격은 중작업용 볼 로크 펀치에 대하여 호환성을 가질 수 있도록 그 치수와 공차를 규정

Tools for pressing－Ball-lock punches－Part 2：Ball-lock punches for heavy duty

NF E63-105:2007 冲压工具.球锁紧的冲头.球锁紧装置

Press tools - Ball lock punches - Ball lock device.