共找到 995 条与 焊接与切割设备 相关的标准,共 67 页
Arc welding equipment. Part 11. Electrode holders
Arc welding equipment. Part 5. Wire feeders
Arc welding equipment. Part 2. Liguid cooling sistems
Arc welding equipment. Part 3. Arc striking and stabilizing devices
本标准规定了氧-汽油焊割设备的分类及型号、技术要求、安全要求、试验及检测、检验规则、标志和包装。本标准适用于焊接、切割及加热用的各类型氧-汽油焊割设备(以下简称设备)。
Oxygen-petrolic welding and cutting equipment
Gas welding equipment. Marking for equipment used for gas welding, cutting and allied processes
本标准规定了型材切割机的基本参数和型式、技术要求、试验方法、检验规则、标志和包装、保修期限和附件。本标准适用于一般环境条件下,用纤维增强树脂薄片砂轮对圆形钢管、异型钢管、铸铁管、圆钢、角钢、槽钢、扁钢等型材进行切割,并以三相工频、单相电容电动机或单相串励电动机为动力的可移式型材切割机(以下简称切割机)。
Cut-off machines
本标准规定了液压胶管切割机型式与型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于切断液压胶管(含气动胶管)的专用切割设备——液压胶管切割机(以下简称切割机或产品)。
Hydraulic-hose cutting machine
本标准适用于采用超声波焊接技术作为焊接方法,并具有单(多)工位、全过程自动化的设备。本焊接机适用于熔点较低(400 ℃ 以下)的材料焊接,即主要以热塑性的聚合物即塑料为主。
General technical requirements for automatic ultrasonic welding machine for combined bottle caps
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013); German version EN ISO 9312:2013
Gas welding equipment.Materials for equipment used in gas welding, cutting and allied processes; Amendment 1
Arc welding equipment -- Part 6: Limited duty equipment
Arc welding equipment - Part 5: wire feeders
Arc welding equipment.Part 2: Liquid cooling systems (IEC 60974-2:2013); German version EN 60974-2:2013
This part of IEC 60974 specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. This part of IEC 60974 is applicable to stand-alone units which may be connected to a separate welding power source or one where the welding power source and the arc striking and arc stabilizing device are housed in a single enclosure. NOTE 1 Typical allied processes are for example plasma arc cutting and arc spraying. NOTE 2 This standard does not include electromagnetic compatibility (EMC) requirements.
Arc welding equipment - Part 3: Arc striking and stabilizing devices
Arc welding equipment.Part 7: Torches (IEC 60974-7:2013); German version EN 60974-7:2013
This International Standard specifies the gas letter code to be used for marking the equipment for gas welding, cutting and allied processes, when the full name of the gas cannot be used.
Gas welding equipment.Marking for equipment used for gas welding, cutting and allied processes
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
이 표준은 석재, 황토, 숯 등 무기재료를 온돌판의 주원료로 사용하고 보료 내부에 전열장치를 갖는것으로서, 단상 교류 250 V 이하의 온돌식 전기 침대(이하 침대라 한다.)에 대하여 규정한다.
Electric beds of Ondol type
Stud welding machine technical specification
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号