J64 焊接与切割设备 标准查询与下载

ISO 14113:2013 气焊设备. 450 bar (45 MPa) 以下工业气体传输用橡胶和塑料软管及其组件

This International Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 ℃ to +60 ℃. This International Standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This International Standard does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see ISO 3821 and ISO 12170). This International Standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).

Gas welding equipment.Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

BS EN 60974-5:2013 电弧焊设备.焊丝进料装置

Arc welding equipment. Wire feeders

NF A85-009-2:2013 电弧焊接设备.第2部分:液体冷却系统

Arc welding equipment - Part 2: liquid cooling systems

DIN EN ISO 15615:2013 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全性要求(ISO 15615-2013).德文版本EN ISO 15615-2013

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2013); German version EN ISO 15615:2013

BS EN 60974-2:2013 电弧焊接设备.液体冷却系统

Arc welding equipment. Liquid cooling systems

BS EN ISO 9312:2013 电阻焊设备.电极备份用绝缘销子

Resistance welding equipment. Insulated pins for use in electrode back-ups

EN ISO 9312:2013 电阻焊接设备.电极备份用绝缘销子

Diese Internationale Norm legt die Anforderungen an isolierende Zylinderstifte fest, die dafur genutzt werden um Teile im Sekundarkreislauf der Widerstandsschweisausrustung oder anderen spannungsfuhrenden Gerateteilen, welche voneinander isoliert werden sollen, zu befestigen.

Resistance welding equipment - Insulated pins for use in electrode back-ups

ISO 9312:2013 电阻焊设备.电极备份用绝缘销子

This International Standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment, or other live equipment, which need to be insulated from each other.

Resistance welding equipment.Insulated pins for use in electrode back-ups

DIN EN 60974-1:2013 弧焊设备. 第1部分:焊接电源 (IEC 60974-1-2012); 德文版本EN 60974-1-2012

Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:2012); German version EN 60974-1:2012

BS EN 60974-7:2013 电弧焊接设备.焊炬

Arc welding equipment. Torches

JG/T 94-2013 钢筋气压焊机

本标准规定了钢筋气压焊机的分类和标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于由多嘴环管加热器、加压器和焊接夹具三部分组成的手动或电动钢筋气压焊机。

Gas pressure welder for reinforcing steel bar

IEC 60974-5:2013 电弧焊设备.第5部分:焊丝进料装置

This part of IEC 60974 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power source or one where the welding power source and the wire feeder are housed in a single enclosure. The wire feeder may be suitable for manually or mechanically guided torches. This part of IEC 60974 is not applicable to spool-on torches that are covered by IEC 60974-7. This part of IEC 60974 is not applicable to wire feeders which are designed mainly for use by laymen and design in accordance with IEC 60974-6. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This standard does not include electromagnetic compatibility (EMC)requirements.

Arc welding equipment.Part 5: Wire feeders

BS EN ISO 15615:2013 气焊设备.焊接、切割和有关加工工艺用的乙炔气支管系统.高压装置的安全性要求

Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices

EN ISO 15615:2013 气焊设备.焊接,切割和相关工艺用乙炔多头管系统.高压装置的安全性要求

Diese Internationale Norm legt allgemeine Festlegungen, Anforderungen und Prufungen fur hochdruckseitig liegende Ausrustungsteile in Acetylenflaschen-Batterieanlagen nach ISO 14114 fest. Diese Norm behandelt nicht die Hochdruckleitungen, Schlauchleitungen und den Druckregler. ANMERKUNG Die Begriffe "anstromseitig" und "abstromseitig" beziehen sich auf die normale Gasdurchflussrichtung der Einrichtung.

Gas welding equipment - Acetylene manifold systems for welding@ cutting and allied processes - Safety requirements in high-pressure devices

ISO 15615:2013 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全性要求

This International Standard establishes the general specifications, requirements and tests for devices located on the high-pressure side of acetylene manifold systems as defined in ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator. NOTE The terms “upstream” and “downstream” refer to the normal direction of gas flow in the device.

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices

IEC 60974-2:2013 电弧焊接设备.第2部分:液体冷却系统

This part of IEC 60974 specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. This part of IEC 60974 is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This part of IEC 60974 is not applicable to refrigerated cooling systems. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 This part of IEC 60974 does not include electromagnetic compatibility (EMC) requirements.

Arc welding equipment - Part 2: Liquid cooling systems

IEC 60974-7:2013 弧焊设备.第7部分:焊炬

"This part of IEC 60974 specifies safety and construction requirements for torches for arc welding and allied processes. This part of IEC 60974 is applicable to manual@ mechanically guided@ air-cooled@ liquid-cooled@ motorized@ spool-on and fume extraction torches. In this part of IEC 60974@ a torch consists of the torch body@ the cable-hose assembly and other components. This part of IEC 60974 is also applicable to a cable-hose assembly connected between a power source and ancillary equipment. This part of IEC 60974 is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. NOTE 1 Typical allied processes are electric arc cutting and arc spraying. NOTE 2 Other components are listed in Table A.1. NOTE 3 In this part of IEC 60974@ the terms ""torch"" and ""gun"" are interchangeable. For convenience ""torch"" has been used in the following text."

Arc welding equipment - Part 7: Torches

PD CEN/TR 13259:2013 气焊设备.火焰加热,火焰钎焊和相关工艺用工业手动和机器吹风管

Gas welding equipment - Industrial manual and machine blowpipes for flame heating@ flame brazing and allied processes

KS C ISO 12405-1:2012 电动车用锂二次电池/系统评估.第1部分:高功率用电池

이 표준은 전기자동차용 리튬이차전지 팩/시스템의 평가방법에 대하여 규정한다.이 표준

Electrically propelled road vehicles-Test specification for lithium-ion traction battery packs and systems-Part 1:High-power applications

NF A85-009-1:2012 电弧焊设备.第1部分:焊接电源

Arc welding equipment - Part 1: welding power sources