J64 焊接与切割设备 标准查询与下载
共找到 995 条与 焊接与切割设备 相关的标准，共 67 页
This part of IEC 60974 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in nonexplosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, this standard also applies to the power source. NOTE See Annex A for mechanised plasma system diagram.
Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-09-30
- 实施
- 2009-09-30
Specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. Applies to stand-alone arc striking and arc stabilizing devices that are either connected to a separate weldi
Arc welding equipment Part 3: Arc striking and stabilizing devices
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-09-23
- 实施
Welding - Laser beam process for material treatment - Terms for processes and equipment
- ICS
- 01.040.25;25.160.10
- CCS
- J64
- 发布
- 2009-08
- 实施
Specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. Is applicable to stand-alone liquid cooling systems that are either connected to a separate w
Arc welding equipment Part 2: Liquid cooling systems
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-07-17
- 实施
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-07
- 实施
Validation of arc welding equipment; German version EN 50504:2008
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-07
- 实施
- 2009-07-01
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation (IEC 62135-1:2008); German version EN 62135-1:2008
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-07
- 实施
- 2009-07-01
Specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire.
Arc welding equipment Part 5: Wire feeders
- ICS
- 25.160;25.160.30
- CCS
- J64
- 发布
- 2009-05-15
- 实施
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-05
- 实施
This Technical Report specifies a test method for measuring the noise emitted by manual blowpipes according to EN ISO 5172 used for welding, cutting and allied processes. This test method is used only for comparative purposes between manual blowpipes when tested under nominal conditions under clause 5.
Gas welding equipment — Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering — Measurement method
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-04-30
- 实施
- 2009-04-30
This part of IEC 62135 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This standard covers stationary and portable equipment. It specifies safety requirements for design, manufacture and installation. To comply with this standard, all safety risks involved in loading, feeding, operating and unloading the equipment, where applicable, should be assessed and the requirements of related standards should be observed.
Resistance welding equipment - Safety requirements for design, manufacture and installation
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This Standard specifies structure and performance of electrode force measuring device for resistance welding equipment (hereafter referred to as "an electrode force measuring device") which measures electrode force of resistance welding equipment (hereafter re- ferred to as "electrode force") using a force sensing unit covering the range of 0.1 kN to 50 kN. The measuring devices with built-in resistance welding equipment are excluded in this Standard.
Electrode force measuring device for resistance welding equipment
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-03-20
- 实施
- 2009-03-23
This part of IEC 60974 specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. This part of IEC 60974 is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This part of IEC 60974 is not applicable to refrigerated cooling systems.
Arc welding equipment — Part 2: Liquid cooling systems
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2009-02-28
- 实施
- 2009-02-28
