J64 焊接与切割设备 标准查询与下载

NF A84-419:2008 气焊设备.压力小于450巴(45MPa)的工业气体用橡胶和塑料软管及软管组件

Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa).

NF A82-115:2008 电阻焊设备.点焊电极的安装角度

Resistance welding equipment - Angles for mounting spot welding electrodes.

BS EN ISO 14113:2008 气焊设备.压力小于450bar(45MPa)的工业气体用橡胶和塑料软管和软管组件

This International Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied and dissolved gases up to a maximum working pressure of 45 MPa (450 bar), within the ambient temperature range of ?20 °C to +60 °C. This International Standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This International Standard does not cover rubber or thermoplastic hoses for welding, cutting and allied processes (see ISO 3821 and ISO 12170). This International Standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).

Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

DIN EN 60974-5:2008 弧焊设备.第5部分:送丝器

Arc welding equipment - Part 5: Wire feeders (IEC 60974-5:2007); German version EN 60974-5:2008

DIN EN 60974-2:2008 弧焊设备.第2部分:液体冷却系统

Arc welding equipment - Part 2: Liquid cooling systems (IEC 60974-2:2007); German version EN 60974-2:2008

JIS C 9300-11:2008 弧焊设备.第11部分:电焊钳

Arc welding equipment -- Part 11: Electrode holders

JIS C 9300-12:2008 电弧焊接设备.第12部分:电缆焊接用连接装置

Arc welding equipment -- Part 12: Coupling devices for welding cables

KS B ISO 7291:2008 气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器

이 표준은 용접, 절단 및 관련 공정에 사용되는 다기관 장치용 압력 조정기의 기술적 조건과

Gas welding equipment-Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar

NF A85-010:2008 弧焊设备的通风

Validation of arc welding equipment.

DIN EN 60974-3:2008 弧焊设备.第3部分:电弧放电和稳定装置

Arc welding equipment - Part 3: Arc striking and stabilizing devices (IEC 60974-3:2007); German version EN 60974-3:2007

DIN EN 60974-10:2008 弧焊设备.第10部分:电磁兼容性(EMC)要求

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2007); German version EN 60974-10:2007

DIN EN ISO 14744-1:2008 焊接.电子束焊接机的验收检验.第1部分:原则和验收条件

This part of ISO 14744 specifies requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises.

Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008); German version EN ISO 14744-1:2008

BS EN 62135-2:2008 电阻焊接设备.电磁兼容性(EMC)要求

Resistance welding equipment. Electromagnetic compatibility (EMC) requirements

IEC 62135-1:2008 电阻焊接设备.第1部分:设计、制造和安装用安全要求

This part of IEC 62135 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This standard covers stationary and portable equipment. It specifies safety requirements for design, manufacture and installation. To comply with this standard, all safety risks involved in loading, feeding, operating and unloading the equipment, where applicable, should be assessed and the requirements of related standards should be observed.

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

BS EN 50505:2008 人类暴露于电阻焊及其类似加工设备电磁场的评估用基础标准

This European Standard applies to equipment for resistance welding and allied processes designed for use in industrial or domestic environments. NOTE 1 Typical allied processes are resistance hard and soft soldering or resistance heating achieved by means comparable to resistance welding equipment. This European Standard establishes a suitable evaluation method for determining the electromagnetic fields in the space around the equipment and defines standardized operating conditions and measuring distances. It provides a method to show conformity with guidelines or requirements concerning human exposure to electromagnetic fields. The Directive 2006/95/EC of the European Parliament and the Council [1], Article 2, stipulates that the Member States take all appropriate measures to ensure that electrical equipment may be placed on the market only if, having been constructed in accordance with good engineering practice in safety matters in force in the Community, it does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which is was made. The principal elements of those safety objectives are listed in Annex I Clause 2.b. This standard may be used in conjunction with EN 50445 for demonstration of conformity to the Council Directive with reference to human exposure to electromagnetic fields (EMF). There are additional requirements covered by Article 2 and Annex I Clause 2.b, which are not included in this document.The Council Recommendation 1999/519/EC [2] provides Basic Restrictions and Derived reference levels for exposure of the general public. This standard may be used for demonstration of resistance welding equipment conformity to the Council Recommendation on this basis, but there may be additional specific national or international requirements which are not included. The ICNIRP Guidelines [3], on limits of exposure to static magnetic fields as well as for limiting exposure in time varying electric, magnetic and electromagnetic fields, provide Basic restrictions and Derived reference levels for both occupational and general exposure. This standard may be used for demonstration of equipment conformity to ICNIRP Guidelines on this basis, but there may be additional national or international requirements which are not included. It is also possible to use this document as a basis to demonstrate conformity of resistance welding equipment to other national and international guidelines or requirements with regard to human exposure from EMF, for example Council Directive 2004/40/EC [4] on the minimum health and safety requirements regarding the exposure of workers to the risk arising from physical agents (electromagnetic fields), or the requirements of the Directive 98/37/EC [5]. In these cases, other restrictions and levels than those referenced above may be used. Other standards may apply to equipment covered by this standard. In particular this standard can not be used to demonstrate electromagnetic compatibility with other equipment; nor does it specify any product safety requirements other than those specifically related to human exposure to electromagnetic fields. The frequency range covered is 0 Hz to 300 GHz. NOTE 2 Procedures to demonstrate conformity are not specified for the whole frequency range.

Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes

BS EN ISO 14744-1:2008 焊接.电子束焊接机器的验收检验.原则和验收条件

Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions

SANS 5183-2:2008 电阻点焊.外锥度1:10的电极接头.第2部分:端推力电极用平行柄接头

Specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper and a parallel shaft is used to fix the adaptor to the electrode holder.

Resistance spot welding - Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes

SANS 5183-1:2008 电阻焊接设备.外锥度1:10的电极接头.第1部分:锥度1:10的锥形固定接头

Specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper and for which the electrode taper fits conform to ISO 1089

Resistance welding equipment - Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10

ISO 14744-1:2008 焊接.电子束焊接机器的验收检验.第1部分:原则和验收条件

Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions

BS EN 60974-10:2007 弧焊设备.第10部分:电磁兼容性(EMC)要求

This part of IEC 60974 specifies a) applicable standards and test methods for radio-frequency (r.f.) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. NOTE 1 Allied processes are, for example, plasma cutting and arc stud welding. NOTE 2 This standard does not specify basic safety requirements for arc welding equipment such as protection against electric shock, unsafe operation, insulation coordination and related dielectric tests. Arc welding equipment type tested in accordance with, and which has met the requirements of, this standard is considered to be in compliance for all applications.

Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements