J64 焊接与切割设备 标准查询与下载
共找到 995 条与 焊接与切割设备 相关的标准，共 67 页
This part of IEC 60974 specifies a) applicable standards and test methods for radio-frequency (r.f.) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. NOTE 1 Allied processes are, for example, plasma cutting and arc stud welding. NOTE 2 This standard does not specify basic safety requirements for arc welding equipment such as protection against electric shock, unsafe operation, insulation coordination and related dielectric tests. Arc welding equipment type tested in accordance with, and which has met the requirements of, this standard is considered to be in compliance for all applications.
Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements
- ICS
- 25.160.10;25.160.30
- CCS
- J64
- 发布
- 2008-04-30
- 实施
- 2008-04-30
Resistance welding equipment - Part 2 : electromagnetic compatibility (EMC) requirements.
- ICS
- 25.160.30;33.100.01
- CCS
- J64
- 发布
- 2008-04-01
- 实施
- 2008-04-19
This part of ISO 15012 specifies a method for establishing the minimum air volume flow rate required for captor hoods and nozzles to effectively capture fume and gases from welding and allied processes. The method can be used with capture devices of any aspect ratio and cross-sectional area, but it is not applicable to on-gun extraction systems and down draught tables. This part of ISO 15012 also specifies the test data to be marked on the capture devices.
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008-04
- 实施
Arc welding equipment - Part 2 : liquid cooling systems.
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008-03-01
- 实施
- 2008-03-27
Arc welding equipment - Part 10 : electromagnetic compatibility (EMC) requirements.
- ICS
- 25.160.10
- CCS
- J64
- 发布
- 2008-03-01
- 实施
- 2008-03-06
Arc welding equipment - Part 5 : wire feeders.
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008-03-01
- 实施
- 2008-03-27
Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes.
- ICS
- 13.280;25.160.10
- CCS
- J64
- 发布
- 2008-03-01
- 实施
- 2008-03-27
This European Standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes. This European Standard does not cover the design of the part of the hose tail inserted into the hose. This is specified in EN 1256.
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes(includes Corrigendum AC:2007）; English version of DIN EN 560:2008-03
- ICS
- 23.040.70
- CCS
- J64
- 发布
- 2008-03
- 实施
This European Standard specifies performance and test requirements of hose assemblies, if supplied in assembled condition for equipment for gas welding, cutting and allied processes using rubber hoses in compliance with EN 559. This European Standard is not applicable to hose assemblies where the hoses are not in compliance with EN 559 (e.g high pressure hoses).
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; English version of DIN EN 1256:2008-03
- ICS
- CCS
- J64
- 发布
- 2008-03
- 实施
Arc welding equipment - Part 3 : arc striking and stabilizing devices.
- ICS
- 25.160.10
- CCS
- J64
- 发布
- 2008-02-01
- 实施
- 2008-02-16
This International Standard specifies requirements and test methods for air-aspirated hand blowpipes. This International Standard applies to blowpipes for brazing, soldering, heating, fusion and other allied thermal processes, which use a fuel gas and aspirated air (injector-type blowpipes), and are intended for manual use. This International Standard is applicable to: -air-aspirated hand blowpipes which are fed with a fuel gas in the gaseous phase, at a controlled pressure by a regulator, through a gas supply hose; - air-aspirated hand blowpipes which are fed with a liquefied fuel gas in the gaseous phase at the container pressure, through a gas supply hose; - so-called liquid-phase blowpipes which are fed with a fuel gas in the liquid phase, and where thermal evaporation takes place within the blowpipe. It does not apply to blowpipes in which the fuel gas leaves the injector in the liquid phase, or to so-called “cartridge” blowpipes where the gas supply is fixed directly onto the blowpipe and possibly constitutes the shank. NOTE Figures 1 to 4 of this International Standard are given for guidance only, to facilitate the explanation of the terms. They do not specify the construction details which are left to the discretion of the manufacturer.
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008-02
- 实施
Safety and performance requirements for arc striking/stabilizing devices applicable for welding, cutting and allied processes, and designed for industrial and professional use
Arc Welding Equipment - Part 3: Arc Striking/Stabilizing Devices
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008
- 实施
Safety and performance requirements for cooling systems applicable for welding, cutting and allied processes, and designed for industrial and professional use
Arc Welding Equipment - Part 2: Cooling Systems
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008
- 实施
Safety and performance requirements for power sources applicable in welding, cutting and allied processes, and designed for industrial and professional use.
Arc Welding Equipment - Part 1: Power Sources
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008
- 实施
Safety and performance requirements for wire feeders applicable for welding, cutting and allied processes, and designed for industrial and professional use
Arc Welding Equipment - Part 5: Wire Feeders
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2008
- 实施
This part of IEC 60974 specifies a) applicable standards and test methods for radio-frequency (r.f.) emissions; b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. NOTE 1 Allied processes are, for example, plasma cutting and arc stud welding. NOTE 2 This standard does not specify basic safety requirements for arc welding equipment such as protection against electric shock, unsafe operation, insulation coordination and related dielectric tests. Arc welding equipment type tested in accordance with, and which has met the requirements of, this standard is considered to be in compliance for all applications.
Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2007-12
- 实施
This part of IEC 60974 specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. This part of IEC 60974 is applicable to stand-alone arc striking and arc stabilizing devices that are either connected to a separate welding power source or built into the welding power source enclosure. NOTE 1 Typical allied processes are for example plasma arc cutting and arc spraying. NOTE 2 This standard does not include electromagnetic compatibility (EMC) requirements.
Arc welding equipment - Part 3: Arc striking and stabilizing devices (IEC 60974-3:2007)
- ICS
- 25.160.30
- CCS
- J64
- 发布
- 2007-12
- 实施
이 규격은 용접부의 파괴 시험을 규정한다. 이 규격은 두께 0.5∼4 mm의 모든 금속 재
Resistance spot welding and projection welds-Destructive testing of welds-Specimen dimensions and procedure for impact sheaar test and cross-tension testing
- ICS
- 25.160.40
- CCS
- J64
- 发布
- 2007-11-30
- 实施
- 2007-11-30
이 규격은 용접 및 관련공정에서의 안전과 보건에 적용된다. 이 규격은 퓸 데이터 시트를 작
Health and safety in welding and allied processes－Laboratory method for sampling fume and gases－Part 4：Fume data sheets
- ICS
- 13.100;25.160.10
- CCS
- J64
- 发布
- 2007-11-30
- 实施
- 2007-11-30
이 규격은 두께 0.4∼3 mm의 판재에 대한 2겹 혹은 3겹의 비도금 및 금속 도금 저탄
Resistance welding－Procedure for spot welding of uncoated and coated low carbon steels
- ICS
- 25.160.10
- CCS
- J64
- 发布
- 2007-11-23
- 实施
- 2007-11-23
