J64 焊接与切割设备 标准查询与下载

KS B ISO 18274:2004 焊接材料.镍和镍合金电弧焊用焊丝和条式电极、金属线和棒材.分类

이 규격은 니켈 및 니켈 합금의 용융 용접을 위한 용접 재료로 사용되는 솔리드 와이어,

Welding consumables-Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys-Classification

KS B ISO 18273:2004 焊接材料.铝和铝合金焊接用焊丝电极、金属丝和棒材.分类

이 규격은 알루미늄과 알루미늄 합금의 용융 용접에 사용되는 솔리드 와이어와 로드의 분류

Welding consumables-Wire electrodes, wires and rods for welding of aluminium and aluminium alloys-Classification

KS B ISO 14341:2004 焊接材料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类

이 규격은 항복 강도가 최소 500 N/mm2 이상 또는 인장 강도가 최소 570 N/

Welding consumables-Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels-Classification

KS B ISO 15792-1:2004 焊接材料.试验方法.第1部分:钢、镍和镍合金中全焊接金属试样的试验方法

이 규격은 시험 부재 및 시험편의 준비를 규정한다. 목적은 강, 니켈 및 니켈 합금의

Welding consumables-Test methods-Part 1:Test methods fo all-weld metal test specimens in steel,nickel and nickel alloys

KS B ISO 14271:2004 电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度)

이 규격은 점, 프로젝션, 심 용접의 에칭된 단면을 경도 시험하는 절차에 대하여 규정한

Vickers hardness testing of resistance spot, projection and seam welds(low load and microhardness)

KS B ISO 15792-3:2004 焊接材料.试验方法.第3部分:角焊中焊接材料定位能力和根部焊透层的分类试验

이 규격은 분류 기준으로 인용될 경우 탄소-망간 강재, 저합금 강재, 스테인리스 강재,

Welding consumables-Test methods-Part 3:Classification testing of positional capacity and root penetration of welding consumables in a fillet weld

SANS 5826:2004 电阻焊接设备.变压器.适用于所有变压器的一般规格

Gives specifications applicable to transformers for resistance welding equipment without connected rectifier.

Resistance welding equipment - Transformers - General specifications applicable to all transformers

KS B ISO 14372:2004 焊接材料.通过测量可扩散氢测定手工电弧焊电极的抗湿性

이 규격은 습한 대기 중에 24시간 노출시킨 후 확산성 수소 시험을 통해 표준(ST)

Welding consumables-Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen

KS B ISO 14344:2004 焊接和相关工艺.焊剂和气体保护弧焊法.消耗品的采购导则

이 규격은 용접 재료의 ISO 9001에 기초한 품질 체계와 같이 공급자와 사용자 간의

Welding and allied processes-Flux and gas shielded electrical welding processes-Procurement guidelines for consumables

KS B ISO 14327:2004 电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程

이 규격은 용접 품질을 위해 용접성 로브를 결정하기 위한 절차에 대하여 규정한다. 이

Resistance welding－Procedures for determining the weldability lobe for resistance spot, projection and seam welding

DIN EN 60974-8:2004 电弧焊设备.第8部分:焊接和等离子切割设备用气体控制台

Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems (IEC 60974-8:2004); German version EN 60974-8:2004

KS C 9626-2004 电阻焊机晶闸管

이 규격은 주회로의 공칭 전압 220 V 또는 440 V의 60 Hz 단상 교류 회로에

Thyristorstacks for resistance welding machine

BS EN 60974-11:2004 弧焊设备.电焊钳

This part of IEC 60974 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This part of IEC 60974 specifies safety and performance requirements of electrode holders.

Arc welding equipment. Electrode holders

SANS 1671-4:2004 热塑性塑料的焊接．机械和设备．第4部分：热气挤压焊接

Specifies requirements for machines and equipment used for hot-gas extrusion welding of thermoplastics.

Welding of thermoplastics - Machines and equipment Part 4: Hot-gas extrusion welding

SANS 1671-3:2004 热塑性塑料的焊接．机械和设备．第3部分：热气焊接

Specifies requirements for machines and equipment used for hot-gas welding of thermoplastics.

Welding of thermoplastics - Machines and equipment Part 3: Hot-gas welding

SANS 5828:2004 电阻焊接设备.水冷耳接线柱辅助连接电缆.尺寸及特点

Specifies the dimensions and characteristics of secondary connecting cables which are air-cooled over their length and with terminals connected to water-cooled lugs.

Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics

ISO 15296:2004 气焊设备.词汇.气焊设备术语

This International Standard constitutes a compilation of technical terms and definitions specificly related to gas welding equipment. NOTE In addition to terms in English and French (two of the three official ISO languages), this International Standard gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

Gas welding equipment - Vocabulary - Terms used for gas welding equipment

IEC 60974-10:2004 弧焊设备.第10部分:电磁兼容性要求

Applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilising devices. With regard to emissions, the objective of this stan

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

SANS 14113:2004 气焊设备．用于最大设计压力在450巴以下的压缩气体和液化气的组装橡胶和塑料管

Specifies requirements for rubber and plastics hoses and hose assemblies for use with compressed or liquefied gases up to a maximum design pressure of 450 bar (45 MPa), within the ambient temperature range -20 鳦 to +60 鳦.

Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar

SANS 8207:2004 气焊设备．焊接，切割及相关工艺用设备的软管组件规范

Specifies performance and test requirements of hose assemblies using rubber hose, if supplied in assembled condition for equipment for gas welding, cutting and allied processes.

Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes