J64 焊接与切割设备 标准查询与下载

DIN EN 730-1:2003 气焊设备.安全装置.第1部分:装有火焰(逆燃)制动器; 德文版本 EN 730-1:2002

The document specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and (or) pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This Standard does not specify the location of these devices in the gas system. This Standard does not include requirements for safety devices which do not incorporate a flame arrestor which are covered by EN 730-2.#,,#

Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor; German version EN 730-1:2002

IEC 60974-6:2003 弧焊设备.第6部分:限制负载的手工金属弧焊电源

本部分适用于带热切断装置的、限制负载的手工金属弧焊电源。 这些弧焊电源主要由非专业人员使用。 本部分规定了额定最大焊接电流不超过160 A的弧焊电源的结构安全要求和性能要求。 本部分不适用于： ——旋转式弧焊电源； 带遥控的弧焊电源； ——变频式的弧焊电源。

Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources

ANSI/AWS C5.5/C5.5M:2003 钨电极惰性气体保护焊的推荐规范

This document is designed to assist anyone who is associated with gas tungsten arc welding (GTAW). This includes welders, welding technicians, welding engineers, quality control personnel, welding supervisors, purchasing personnel, educators, and students. This document discusses welding principles, equipment, gas shielding , and techniques for manual and automatic GTAW. Welding safety, trouble shooting, and related items are included for understanding by all types of personnel in establishing better production welding operations

Recommended Practices for Gas-Tungsten-Arc Welding

CSA E60974-5-03-CAN/CSA-2003 弧焊设备 第5部分：版送丝装置 第1版

Arc welding equipment - Part 5: Wire feeders First Edition

Arc Welding Equipment - Part 5: Premiere Edition Wire Feeders

BS EN 730-2:2002 气焊设备.安全性装置.未使用火焰(反逆弧)阻止器

This Part of this European Standard specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air which do not incorporate a flame (flashback) arrestor used downstream of manifold, cylinder and (or) pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This standard does not specify the location of these devices in the gas system. This standard does not include requirements for safety devices which incorporate a flame arrestor which are covered by EN 730-1.

Gas welding equipment - Safety devices - Not incorporating a flame (flashback) arrestor

BS EN 730-1:2002 气焊设备.安全性装置.使用火焰(反逆弧)阻止器

This Part of this European Standard specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and (or) pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This standard does not specify the location of these devices in the gas system. This standard does not include requirements for safety devices which do not incorporate a flame arrestor which are covered by EN 730-2. This standard does not cover the use of safety devices incorporating flame arrestors for applications with premixed oxy/fuel or air/fuel gas supply systems, for example downstream of gas mixers or a generator to produce hydrogen/oxygen mixture by electrolytic decomposition of water.

Gas welding equipment - Safety devices - Incorporating a flame (flashback) arrestor

NF A84-621*NF EN 561:2002 气焊设备.焊接、切割和相关工艺用带截流阀的速动连接

Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.

KS B ISO 3253:2002 气焊设备.焊接、切割和有关工艺设备的软管连接

이 규격은 용접, 절단 및 접합 공정에 쓰이는 호스 연결부 구성품에 대한 특성을 구체화 하

Gas welding equipment－Hose connections for equipment for welding, cutting and allied processes

BS EN ISO 8205-2:2002 电阻焊用水冷辅助连接电缆.单芯连接电缆的尺寸和要求

This part of ISO 8205 specifies the dimensions of single-conductor connection cables used for resistance welding and allied processes. It stipulates the requirements regarding the electrical, mechanical and cooling characteristics of these cables and their conditions of use.

Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables

DIN EN 561:2002 气焊设备.焊接、切割和相关工艺用与关闭阀的速动连接; 德文版本 EN 561:2002

This standard defines the specifications and the type tests for quick-action couplings with shut-off valve. It applies to quick-action couplings used between the regulator and the torch in equipment.

Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes; German version EN 561:2002

BS DD CLC/TS 62081:2002 电弧焊接设备.安装和使用

This technical specification is applicable to the installation and industrial and professional use of welding power sources, equipment and accessories for arc welding and allied processes.

Arc welding equipment - Installation and use

DD CLC/TS 62081-2002 电弧焊接设备.安装和使用

This technical specification is applicable to the installation and industrial and professional use of welding power sources, equipment and accessories for arc welding and allied processes.

Arc welding equipment. Installation and use

IEC 60974-10:2002 弧焊设备.第10部分:电磁兼容性(EMC)要求

This part of IEC 60974 is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilising devices. NOTE 1 Allied processes are, e.g., plasma cutting and arc stud welding. NOTE 2 This standard does not specify basic safety requirements for arc welding equipment such as protection against electric shock, unsafe operation, insulation co-ordination and related dielectric tests. Arc welding equipment type tested in accordance with, and which has met the requirements of, this standard is considered to be in compliance for all applications. 1 Emission The objective of this standard is to specify a) test methods to be used in conjunction with CISPR 11 and its amendments 1 and 2 to determine electromagnetic emissions; b) relevant standards for harmonic current emission, voltage fluctuations and flicker. 2 Immunity The objective of this standard is to define immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. NOTE 3 These requirements do not cover extreme cases, which may occur with an extremely low probability of occurrence in any location.

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

JB/T 10113-2002 电阻焊设备 两端与水冷连接块相连的次级连接电缆尺寸和特性

　　本标准规定了在其长度上为空气冷却、两端与水冷连接块相连的次级连接电缆的尺寸与特性。 　　次级连接电缆适用于焊接变压器的次级连接线端与电极连接体之间的连接。

Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics

BS EN 561:2002 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器

This European Standard defines the specifications and the type tests for quick-action couplings with shut-off valves. It applies to quick-action couplings used between the regulator and the torch in equipment for gas welding, cutting and allied processes. This standard applies to cases where these couplings are used with hoses according to EN 559 or threaded unions according to EN 560.

Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes

NF A84-000:2002 气焊设备.术语.气焊设备用术语

Gas welding equipment - Terminology - Terms used for gas welding equipment.

DIN EN 13622:2002 气焊设备.术语.气焊设备用术语; 三国语言版本 EN 13622:2002

This standard constitutes a compilation of technical terms and definitions specifically related to gas welding equipment.

Gas welding equipment - Terminology - Terms used for gas welding equipment; Trilingual version EN 13622:2002

BS EN 13622:2002 气体焊接设备.术语.气体焊接使用的术语

This standard constitutes a compilation of technical terms and definitions specificly related to gas welding equipment.

Gas welding equipment - Terminology - Terms used for gas welding equipment

IEC 60974-2:2002 弧焊设备.第2部分:液体冷却系统

Arc welding equipment - Part 2: Liquid cooling systems

BS EN ISO 15615:2002 气焊设备.焊接，切割和有关加工工艺用的乙炔气支管系统.高压装置的安全性要求

This standard lays down the general specifications, requirements and tests of devices located on the high-pressure side of acetylene manifold systems as defined in EN ISO 14114. The standard does not cover the high-pressure piping, flexible hoses and the regulator. NOTE The terms "upstream" and "downstream" refer to the normal direction of gas flow in the device.

Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices