J76 气体分离与液化设备 标准查询与下载
共找到 193 条与 气体分离与液化设备 相关的标准，共 13 页
本标准规定了往复活塞中压氧气压缩机的技术要求、试验方法与检验规则及其他要求。 本标准适用于吸气压力为0.002～0.020MPa、排气压力为3MPa、公称容积流量为300～6000m3/h的往复活塞氧气压缩机。
Reciprocating Piston Medium Pressure Oxygen Compressor Specifications
- ICS
- 71.120
- CCS
- J76
- 发布
- 1993-07-13
- 实施
- 1994-07-01
本标准规定了铝制空气分离设备现场制作、安装的管道和容器所必须遵循的焊接技术要求及检验要求。 本标准适用于铝制空分设备的安装焊接。
Technical specification for installation and welding of aluminum air separation equipment
- ICS
- CCS
- J76
- 发布
- 1993-07-13
- 实施
- 1994-07-01
本标准规定了空气分离设备的表面清洁度、检查方法及评定规则。 本标准适用于空气分离设备中与氧气接触的零、部件表面及设备运转中脏物可能带入与氧气接触的零、部件表面的清洁度。
Surface Cleanliness of Air Separation Plants
- ICS
- CCS
- J76
- 发布
- 1993-07-13
- 实施
- 1994-07-01
本标准规定了一般往复活塞高压氧气压缩机的规定工况、技术性能、试验方法和检验规则及标志、包装、贮存。 本标准适用于吸气压力为0.0005~0.0050MPa、公称排气压力为14.7~16.5MPa，公称容积流量不大于180m3/h，气缸用蒸馏水润滑的充瓶用氧压机。 注：本标准中压力均为表压。
General reciprocating piston high-pressure oxygen compressor technical conditions
- ICS
- 71.120.01
- CCS
- J76
- 发布
- 1993-07-13
- 实施
- 1994-07-01
This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings and is intended to illustrate the subject matter of the related text.
Cryogenic Liquids
- ICS
- 71.120
- CCS
- J76
- 发布
- 1993-01-01
- 实施
This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the
Cryogenic Liquids
- ICS
- 71.120
- CCS
- J76
- 发布
- 1993-01-01
- 实施
本标准规定了静压空气轴承透平膨胀机（向心式透平膨胀机）的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于空气分离、液化等工艺过程中膨胀作功获得冷量的进气压力不大于5.0MPa（绝压）的静压空气轴承透平膨胀机。 本标准不适用于汽、液两相的膨胀机。
Specifications for hydrostatic air bearing turboexpander
- ICS
- CCS
- J76
- 发布
- 1992-07-28
- 实施
- 1993-01-01
Purifiers for Small Air Separation Plants
- ICS
- CCS
- J76
- 发布
- 1992-07-20
- 实施
- 1993-01-01
本标准规定了低温液体容器的分类、型式及基本参数。 本标准适用于贮存和运输低温液化气体的低温液体容器。
Basic parameters of cryogenic liquid container
- ICS
- 71.120.01
- CCS
- J76
- 发布
- 1992-01-20
- 实施
- 1992-10-01
本标准规定了表征低压透平膨胀机特征的基本系列参数。 本标准适用于空气分离、液化等工艺过程中膨胀作功获得冷量的，进气压力不大于1.6MPa（绝压）的向心式透平膨胀机。 两相膨胀机可参照执行。
Basic series parameters of low pressure turboexpander
- ICS
- CCS
- J76
- 发布
- 1992-01-20
- 实施
- 1992-10-01
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa
Cryogenic Liquids
- ICS
- 71.120
- CCS
- J76
- 发布
- 1990-01-01
- 实施
The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa
Cryogenic Liquids Eighth Edition
- ICS
- 71.120
- CCS
- J76
- 发布
- 1990-01-01
- 实施
Dissolved acetylene cylinders; Basic requirements
- ICS
- 2553
- CCS
- J76
- 发布
- 1977-05
- 实施
