J83 仓储设备、装卸机械 标准查询与下载

ISO 3691-5:2014 工业车辆.安全性要求和鉴定.第5部分:步进卡车

This part of ISO 3691 gives safety requirements and the means for their verification for the following types of pedestrian-propelled trucks (hereafter referred to as trucks), equipped with load-handling devices for normal industrial duties, e.g. fork arms and platforms, or integrated attachments for special applications: — pedestrian-propelled straddle stackers, — pallet stackers, — industrial trucks with capacities not exceeding 1000 kg with manual or electrical battery-powered lifting, — low-lift pallet trucks with lift height up to 300 mm and rated capacity up to 2300 kg, — scissor-lift pallet trucks with lift heights up to 1000 mm or rated capacity up to 1000 kg with manual or electrical battery-powered lifting. It is applicable to trucks provided with either manual or electrical battery-powered lifting, operating on smooth, level, hard surfaces. NOTE On-board battery chargers are considered to be part of the truck. Attachments mounted on the loadcarrier or on the fork arms which are removable by the user are not considered to be part of the truck. This part of ISO 3691 deals with significant hazards, hazardous situations and events relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex C). It does not establish the additional requirements for a) climatic conditions, c) electromagnetic compatibility (emission/immunity), e) handling suspended loads which may swing freely handling, b) operation in severe conditions (e.g. extreme environmental conditions such as freezer applications, high temperatures, corrosive environments, strong magnetic fields), d) handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/alkalis, radiating materials, especially brittle loads), f) use on public roads, g) direct contact with foodstuffs, h) operation on gradients or on surfaces other than smooth, level, hard surfaces, i) lifting systems using belts,  Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs 1  j) lifting of persons, l) scissor-lift trucks whose lifting is powered by external means (electric, pneumatic), k) trucks with overturning moment greater than 40000 N·m, m) roll containers, n) trucks that are intended to be towed by powered vehicles, o) trucks designed for special applications (e.g. hospitals, restaurant trolleys), p) winch-operated trucks, q) mobile lifting tables. Hazards relevant to noise, vibration and visibility are not significant and are not dealt with in this part Regional requirements, additional to those given in this part of ISO 3691, are addressed in ISO/TS 36917.

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks

JIS D 6020:2014 叉车.叉车踏板和座位布局和结构

Fork lift trucks.Construction and layout of pedals of sit-on fork lift truck

JIS B 8951:2014 堆垛和卸垛机

Palletizers and depalletizers

JIS B 8920:2014 手推运货车

This Japanese Industrial Standard specifies flatbed hand trucks which are used for carrying goods except humans and animals in plant premises,indoors and the like,mainly by human power,and which are capable of carrying a maximum loading mass not exceeding 1 200 kg.

Hand trucks

DIN 8743:2014 包装机械和包装线.验收试验中数据收集运转状况描述的关键数据和要求

Packaging machines and packaging lines - Key figures to characterise operation behaviour and requirements for data collection in an acceptance test

GOST 33167-2014 液压装载机. 安全要求

Hydraulic loader cranes. Safety requirements

GOST ISO 22915-3-2014 工业用卡车. 稳定性验证. 第3部分. 前伸式和跨载式卡车

Industrial trucks. Verification of stability. Part 3. Reach and straddle trucks

GOST ISO 22915-4-2014 工业用卡车. 稳定性验证. 第4部分. 操作员位置被提升到1200 mm且包括1200 mm提升高度的托盘堆垛机, 双堆垛机以及拣选车

Industrial trucks. Verification of stability. Part 4. Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1200 mm lift height

GOST ISO 22915-2-2014 工业用卡车. 稳定性验证. 第2部分. 带桅杆的平衡卡车

Industrial trucks. Verification of stability. Part 2. Counterbalanced trucks with mast

ISO 22915-13:2012/cor 1:2013 工业车辆.稳定性的验证.第13部分:带桅杆的越野卡车.技术勘误表1

Industrial trucks - Verification of stability - Part 13: Rough-terrain trucks with mast; Technical Corrigendum 1

KS B ISO 2328:2013 叉车.挂钩型货叉和货叉架.安装尺寸

이 표준은 정격하중이 10 999 kg 이하인 지게차 정격 하중 및 포크 형식과 관련하여 포크 및 다른선택작업장치의 상호 호환성을 위하여 포크캐리어 및 훅형 포크에 대한 치수 및 요구사항에 대해 규정한다.

Fork-lift trucks-Hook-on type fork arms and fork arm carriages-Mounting dimensions

KS B ISO 13284:2013 叉车.货叉叉套和伸缩式货叉.技术性能和强度要求

이 표준은 지게차의 덧발포크 및 신축식포크에 대한 기술적 특성 및 강도 요구사항을 규정한다. 이표준은 KS B ISO 5053에 명시한 포크캐리어가 있는 겹 쌓기 지게차에 사용하도록 설계된 덧발포크및 신축식포크에 적용하며, 덧발포크 및 훅식 포크의 경우는 KS B ISO 2330에 따른다.이 표준은 내장식 신축 포크 장치나 격자가위 방식 작동 장치에는 적용하지 않는다.

Fork-lift trucks－Fork-arm extensions and telescopic fork arms－Technical characteristics and strength requirements

DIN ISO 6055:2013 工业用货车.护顶架.规格和检测(ISO 6055-2004)

Industrial trucks - Overhead guards - Specification and testing (ISO 6055:2004)

DIN ISO 22915-1:2013 工业车辆.稳定性验证.第1部分:总则(ISO 22915-1-2008)

Industrial trucks - Verification of stability - Part 1: General (ISO 22915-1:2008)

NF H96-316-2:2013 工业卡车 - 稳定性验证 - 第2部分: 带桅杆的平衡卡车

Industrial trucks - Verification of stability - Part 2: counterbalanced trucks with mast

BS EN 415-6:2013 包装机械安全. 托盘包装机

Safety of packaging machines. Pallet wrapping machines

DIN 15185-2:2013 工业车辆.安全性要求.第2部分:窄通道中的使用

Industrial trucks - Safety requirement - Part 2: Use in narrow aisles

NF H96-300-5:2013 工业卡车.安全性要求和检定.第5部分:步进式卡车

Industrial trucks - Safety requirements and verification - Part 5: pedestrian-propelled trucks

DB37/T 2372-2013 升降横移类机械式停车设备维护保养技术规范

本标准适用于GB/T 26559中定义的升降横移类机械式停车设备（以下简称设备）的维护保养。

Technical specification for maintenance of lift and traverse mechanical parking equipment

DIN EN 16307-5:2013 工业卡车.安全性要求和检定.第5部分:步进卡车的补充要求.德文版本EN 16307-5-2013

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks; German version EN 16307-5:2013