J83 仓储设备、装卸机械 标准查询与下载

JB/T 11198-2011 纸浆模塑蛋托自动生产线

本标准规定了纸浆模塑蛋托自动生产线(以下简称“生产线”)的术语和定义、型号、型式与基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存等。本标准适用于直接包装禽蛋等农副产品的纸浆模塑蛋托的自动生产线,广泛应用于食品、农业、餐饮等行业。

Automatic pulp molding egg tray production line

JB/T 11197-2011 自动制袋机

本标准规定了自动制袋机(以下简称“制袋机”)的术语和定义、型号、型式和基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存等。本标准适用于以单膜、复合膜等材料制成各类包装袋的制袋机,应用于医药、食品、日化、化工等行业。

Automatic bag maker

JB/T 11199-2011 自立袋充填旋盖包装机

本标准规定了自立袋充填旋盖包装机(以下简称“包装机”)的术语和定义、型号、型式与基本参数、要求、试验方法、检验规则及标志、包装、运输和贮存等。本标准适用于液体或膏状体的灌装与旋盖的自立袋充填旋盖包装机,应用于医药、食品、日化、化工等行业。

Stand-up pouch filling and capping machine

JIS D 6021:2011 叉车.架空保护装置

This Standard specifies the requirements and testing of overhead guards, operators' legs and feet protection system for rider operated,powered fork lift trucks with a lift height exceeding 1 800 mm (hereafter referred to as "forklift").

Fork lift trucks -- Overhead guards

JIS D 6202:2011 叉车.规格的标准格式

This Standard specifies the main items to be included in the specifications of counterbalanced fork lift trucks and reach fork lift trucks and the procedure of filling the standard form of these specifications.

Fork lift trucks -- Standard form of specifications

JIS D 6024:2011 叉车.钩挂型货叉及叉架.安装尺寸规格和结构

This Standard specifies mounting dimensions and construction of hook-on type fork arms and fork arm carriages used on a powered fork lift truck (hereafter referred to as the "fork lifts") having the rated load of less than 11 000 kg.

Fork lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions and construction

JIS D 6022:2011 工业机动车辆.操作控制和其他显示器用符号

Powered industrial trucks -- Symbols for operator controls and other displays

JIS D 6027:2011 叉车.叉形臂延长部分和能自由伸缩的叉形臂.技术特性和强度

This Standard specifies the technical characteristics and strength requirements for fork-arm extensions and telescopic fork arms to be mounted on fork-lift trucks (hereafter referred to as "fork lifts") as defined in JIS D 6201.

Fork-lift trucks -- Fork-arm extensions and telescopic fork arms -- Technical characteristics and strength

JIS D 6026:2011 叉车.叉臂.技术特性和试验

This Standard specifies manufacturing,testing and marking requirements for solid-section fork arms for fork lift trucks (hereafter referred to as "fork lifts"), for quantity production and with all types of mounting.These include,but are not limited to,hook,shaft or pin,bolt-on and roller type fork arms.

Fork-lift trucks -- Fork arms -- Technical characteristics and testing

BS ISO 22915-14:2010 工业车辆.稳定性验证.可变崎岖地带用叉式升降卡车

Industrial trucks. Verification of stability. Rough-terrain variable-reach trucks

NF H96-330-3/IN1*NF EN 1175-3/IN1:2011 工业车辆的安全性.电气要求.第3部分:内燃机动力卡车的电力传输系统用具体要求

Safety of industrial trucks - Electrical requirements - Part 3 : specific requirements for the electric power transmission systems of internal combustion engine powered trucks.

ASME B30.13-2011 存储/检索(S/R)机及其辅助设备

ASME B30.13 applies to storage/retrieval (S/R) machines and associated equipment, such as aisle transfer cars and aisle equipment, and interfaces with other material handling equipment covered under other standards. The provisions of this Volume applying to S/R machines shall apply equally to the construction, installation, inspection, testing, maintenance, and operation of aisle transfer cars and any load handling equipment that is part of or attached to S/R machines or aisle transfer cars.

Storage/Retrieval (S/R) Machines and Associated Equipment

ANSI MH16.1-2011 工业用钢制储存支架的设计、试验和使用规范

Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks

ASTM C1554-11 热室用物料搬运设备的标准指南

Materials handling equipment operability and long-term integrity are concerns that originate during the design and fabrication sequences. Such concerns are most efficiently addressed during one or the other of these stages. Equipment operability and integrity can be compromised during handling and installation sequences. For this reason, the subject equipment should be handled and installed under closely controlled and supervised conditions. This guide is intended as a supplement to other standards (Section 2, Referenced Documents), and to federal and state regulations, codes, and criteria applicable to the design of equipment intended for this use. This guide is intended to be generic and to apply to a wide range of types and configurations of materials handling equipment. The term materials handling equipment is used herein in a generic sense. It includes manipulators, cranes, carts or bogies, and special equipment for handling tools and material in hot cells. This service imposes stringent requirements on the quality and the integrity of the equipment, as follows: Boots and similar protective covers should not restrict movement of the equipment, should be properly sealed to the equipment and should withstand the radiation, cell atmosphere, dust, cell temperatures, chemical exposures, and cleaning and decontamination reagents, and also resist snags and tearing. Materials handling equipment should be capable of withstanding rigorous chemical cleaning and decontamination procedures. Materials handling equipment should be designed and fabricated to remain dimensionally stable throughout its life cycle. Attention to fabrication tolerances is necessary to allow the proper fit-up between components for the proper installation and mounting of materials handling equipment in hot cells, for example, when parts or components are being replaced. Fabrication tolerances should be controlled to provide sufficiently loose fits where possible to aid in remote maintenance and replacement of equipment and components. Fabrication materials should be resistant to radiation damage, or materials subject to such damage should be shielded or placed and attached so as to be readily replaceable. Smooth surface finishes are necessary for decontamination reasons. Irregularities that hide and retain radioactive particulates or other adherent contamination should be eliminated or minimized. Materials handling equipment that is exposed to high temperatures, pressures, acidic or caustic conditions may require special design considerations to be compatible with the operating environment. Potential rates of change for temperature and pressure as well as absolute temperature and pressure extremes, created by activation of fire suppression systems and other emergency systems, should be considered. When replacing, modifying or adding additional materials handling equipment to an existing hot cell, maintenance records of materials handling equipment in that hot cell or in a hot cell having a similar processing mission may be available for reference. These records may offer valuable insight with regard to the causes, frequency, and type of failure experienced for the type and class of equipment being designed and engineered, so that improvements can be made in the new equipment. Preventive maintenance based on previous experience in similar environments and similar duty should be performed to prevent unscheduled repair of failed components.1.1 Intent: 1.1.1 This guide covers materials handling equipment used in hot cells (shielded cells) for the processing and handling of nuclear and radioactive materials. The intent of this guide is to aid in the selection and design of materials handling equipment for hot cells in order to minimize equ......

Standard Guide for Materials Handling Equipment for Hot Cells

ANSI/PMMI B155.1-2011 包装机械以及包装相关加工机械的安全要求

The requirements of this standard apply to new, modified or rebuilt industrial and commercial machinery which perform packaging functions for primary, secondary and tertiary packaging. Also included are: - the conveying machinery used within the packaging functions; - coordination of the packaging functions that take place in sequence on the production line; - packaging related converting machinery.

Safety Requirements for Packaging and Packaging Related Converting Machinery

ANSI/ITSDF B56.6-2011 不平地用的铲车的安全标准

This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of rough terrain forklift trucks. These trucks are intended for operation on unimproved natural terrain as well as the disturbed terrain of construction sites.

Safety Standard for Rough Terrain Forklift Trucks

ANSI/ITSDF B56.8-2011 人员和材料运载工具的安全标准

This Standard defines safety requirements relating to the elements of design, operation, and maintenance of powered personnel and burden carriers having three or more wheels, a maximum speed not exceeding 40 km/h (25 mph), and a payload capacity not exceeding 4536 kg (10,000 lb). This Standard does not include vehicles intended primarily for earth moving or over-the-road hauling, or unmanned automatic guided vehicles.

Standards Safety for Personnel and Burden Carriers

ISO 22915-14:2010 工业卡车 稳定性的验证 第14部分 可变崎岖地带用叉式升降卡车

This part of ISO 22915 specifies tests for verifying the stability of rough-terrain variable-reach trucks, equipped with fork arms or with load carrying or non-load carrying attachments. It is not applicable to those trucks designed for handling freight containers or for lifting people or suspended loads.

Industrial trucks - Verification of stability - Part 14: Rough-terrain variable-reach trucks

KS B ISO 22883:2010 脚轮和车轮.1.1 m/s (4 km/h)及以下的速度要求

이 표준은 기술적 요구사항으로 캐스터와 바퀴의 적용 치수와 1.1 m/s(4 km/h) 이

Castors and wheels－Requirements for applications up to 1.1 m/s(4 km/h)

KS B ISO 22915-8:2010 工业卡车.稳定性验证.第8部分:前倾起重杆和提高载荷堆垛的特殊条件下运行的卡车用附加稳定性试验

이 표준은 마스트 전방 기울임 상태로 겹쌓기의 특수 조건에서 트럭 작동에 대한 추가안정도

Industrial trucks-Verification of stability-Part 8:Additional stability test for trucks operating in the special condition of staking with mast tilted forward