J83 仓储设备、装卸机械 标准查询与下载

JB/T 10951-2010 重袋充填包装机

本标准规定了重袋充填包装机的术语和定义、型号、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等要求。 本标准适用于向预制袋(编织袋、纸袋等)充填10kg以上的粒料、粉料的包装机，广泛应用于化工、食品、医药、农产品、饲料、添加剂等行业。

Big bag filling and sealing machine

JB/T 7015-2010 回转式翻车机

本标准规定了回转式翻车机（以下简称翻车机）的术语、型式、技术要求、试验方法、检验规则等。 本标准适用于翻卸铁路敞车用的回转式单车、双车及三车翻车机。其他类型的翻车机也可参照使用。

Rotary car dumper

JB/T 10950-2010 多功能软袋装箱机

本标准规定了多功能软袋装箱机的术语和定义、型号、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等要求。 本标准适用于以机械手、裹包、跌落、推入和集合体套入的方式将软包装袋(内容物为液体、粉体、颗粒等流动性物料)装入包装箱的装箱机。

Multification casing machine for bag

JB/T 4149-2010 臂式斗轮堆取料机.技术条件

本标准规定了臂式斗轮堆取料机(以下简称堆取料机)的技术要求、试验方法、检验规则、验收规则、安全规则、标志、包装、运输和贮存。 本标准适用于臂式斗轮堆取料机、臂式斗轮取料机和臂式堆料机，并作为堆取料机的设计、制造、安装、检查、验收和使用的依据。其他形式的堆取料机可参照使用。

Specifications for boom stacker reclaimer

DIN EN 415-9:2010 包装机械的安全性.第9部分:包装机械、包装线及相关设备用噪音测量方法,2和3精度等级.德文版本EN 415-9-2009

This noise test code specifies all information necessary to carry out efficiently and under defined conditions the determination, declaration and verification of airborne noise emission from packaging machine (covered by EN 415-1:2000, as well as for any other similar machines which are not covered by any other specific noise test code) and packaging lines. It specifies procedures for the determination of sound pressure levels at work station, at other specified positions and the sound power level on the basis of both the sound pressure level method and the sound intensity method. It also specifies installation and operating conditions.

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3; German version EN 415-9:2009

NF H94-001-5/IN1*NF EN 415-5/IN1:2010 包装机械安全性.第5部分:打包机

Safety of packaging machines - Part 5 : wrapping machines.

ASTM D2063/D2063M-10(2012) 非自动(手动)扭矩测试设备用带连续线性封合的包装件的持久扭矩测量的标准试验方法

This test method allows for the measurement of the torque retention properties of container/continuous thread closure systems of various designs, materials, and manufacture, and is suitable for packaging development and engineering evaluation. This test method can be used for the evaluation of container/continuous thread closure systems under controlled conditions (where the application torque is known and the applied downward force to the closure is zero). This test method measures torque retention properties of container/continuous thread closure systems with the use of a non-automated, spring torque-meter (with either a dial indicator or a digital readout) or a torque wrench.1.1 These test methods evaluate the torque retention of continuous thread closures on containers, with matching finishes, for predetermined environmental conditions over time. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Note 18212;The SI unit system is the recommended system. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

KS B ISO 24135-1:2009 工业卡车.司机保护系统的规范书与检查方法.第1部分:围式安全带

이 표준은 운전자 랩 형식 좌석 안전띠 조립체에 대한 요구사항과 검사방법 및 산업용 트럭에

Industrial trucks-Specifications and test methods for operator restraint system-Part 1:Lap-type seat belt

KS B ISO 13284:2009 叉车.货叉叉套和伸缩式货叉.技术性能和强度要求

이 표준은 지게차의 포크 확장 및 신축식 포크에 대한 기술적 특성 및 강도 필요사항을 규정

Fork-lift trucks-Fork-arm extensions and telescopic fork arms-Technical characteristics and strength requirements

KS B ISO 10525:2009 6m及6m以上长度平衡重式货运集装箱搬运车.附加稳定性试验

이 표준은 컨테이너(6 m 이상) 작업용 카운터밸런스 지게차의 추가 안정성 시험을 규정한다

Counterbalanced trucks handling freight containers of 6 m length and above-Additional stability tests

KS B ISO 22877:2009 工业车辆.脚轮和车轮.术语与符号

이 표준은 산업용 트럭의 캐스터 및 바퀴에 관련한 용어와 기호를 규정한다.

Industrial trucks-Casters and wheels-Vocabulary, symbols and multilingual terminology

NF H94-001-3:2009 包装机的安全性.第3部分:成形、填充和密封机

Safety of packaging machines - Part 3 : form, fill and seal machines.

NF H94-001-3/IN1:2009 包装机械的安全性.第3部分:成型、灌装及封口机

Safety of packaging machines - Part 3 : form, fill and seal machines.

DIN EN 415-7:2009 包装机械的安全.第7部分:组件和二次包装机械,德文版本EN 415-7:2006+A1:2008

This European Standard applies to the following groups of machines: Group and secondary packaging machines and the collating systems associated with them. The individual machines are described in 3.2 of this European Standard. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of group and secondary packaging machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines: -- machines that were manufactured before the date of publication of this document by CEN; -- strapping machines. These machines are covered by EN 415-8; -- crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2; -- cartoning machines. Cartoning machines are covered by EN 415-3. This European Standard does not consider the following hazards: -- use of group and secondary packaging machines in potentially explosive atmospheres; -- health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; -- hazards that may be associated with electromagnetic emissions from group and secondary packaging machines; -- hazards that may be associated with decommissioning group and secondary packaging machines.

Safety of packaging machines - Part 7: Group and secondary packaging machines(includes Amendment A1:2009); English version of DIN EN 415-7:2009-12

BS ISO 22915-7:2009 工业车辆.稳定性的验证.双向和多向卡车

Industrial trucks - Verification of stability - Bidirectional and multidirectional trucks

BS ISO 22915-21:2009 工业车辆.稳定性的验证.具有高于1200mm操作者位置提升的高位拣选货车

Industrial trucks - Verification of stability - Order-picking trucks with operator position elevating above 1200mm

ISO 22915-4:2009 工业卡车.稳定性检验.第4部分:货板栈式存储器,双重栈式存储器和带操作员位置升降机构高于并包含 1200 mm 提升高度的低位拣选叉车

Industrial trucks - Verification of stability - Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1200 mm lift height

DIN EN 415-1:2009 打包机的安全.第1部分:打包机及相关设备的专用术语和分类,德文版本EN 415-1:2000+A1:2009

This European standard defines the field of packaging machines in detail in clause 3, but briefly these are: Filling and Dosing machines Closing machines Labelling, decorating and coding machines Cleaning, sterilising, cooling and drying machines Fill and seal machines Inspection machines Container and component handling machines Form, fill and seal machines Cartoning machines Wrapping machines Group or transit packaging machines Pallet or loading unit forming, dismantling and securing machines Annex A indicates where hazards and safety requirements for these machines can be found. In most cases this will be in one of the parts of EN415, but in some cases it may be another European or ISO standard Where no specific standard covers a particular machine Annex A will indicate the most appropriate standard which can be referred to for advice.

Packing machines safety - Part 1: Terminology and classification of packing machines and associated equipment(includes Amendment A1:2009); English version of DIN EN 415-1:2009-10

SANS 2328:2009 叉车.钩接式叉臂和叉式托架.安装尺寸

Specifies the dimensions of, and additional requirements for, fork carriers and hook-on type fork arms, to permit the interchangeability of these fork arms or other attachments (or both), relative to the truck-rated capacity and fork arm type, on fork-li

Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions

SANS 477:2009 动力工业卡车和牵引车.制动性能和部件强度

Specifies performance, test methods, controls, control forces and component strength for brake systems fitted to powered industrial trucks of all capacities, industrial tractors with rated capacities up to and including 20 000 N drawbar pull, burden carr

Powered industrial trucks and tractors - Brake performance and component strength