J83 仓储设备、装卸机械 标准查询与下载

DIN EN 12053:2009 工业卡车的安全.噪声辐射测量的试验方法(包括修改件A1:2008),DIN EN 12053:2009-07的英文版本

This noise measurement standard gives methods for determining the sound pressure level at the operator's position and the sound power level of industrial and rough terrain trucks. This European standard is a type test applicable to all industrial trucks listed in table A1. The test results obtained in accordance with this standard are also applicable to the evaluation of the hazard generated by noise from industrial trucks.

Safety of industrial trucks - Test methods for measuring noise emissions (includes Amendment A1:2008); English version of DIN EN 12053:2009-07

DIN EN 1398:2009 装卸桥.安全性要求.英文版本DIN EN 1398-2009-07

1.1 This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.With the exception of: a) dock levellers for marine and aircraft applications; b) lifting tables; c) vehicle mounted tail lifts. NOTE 1 Requirements for lifting tables are laid down in EN 1570. NOTE 2 Requirements for vehicle mounted tail lifts are laid down in EN 1756-1. 1.2 This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1. NOTE Only dock levellers fitted with a drive system other than directly applied human effort are machines in the sense of the Machinery Directive. 1.3 This European Standard specifies requirements in order to protect persons and objects against accidents and health problems and damage during use and operation of dock levellers. Persons to protect are: a) operators and users; b) maintaining and inspecting personnel; c) persons near the dock leveller. Objects to be protected are: d) goods on dock levellers; e) transport equipment on dock levellers. 1.4 The significant hazards of dock levellers are listed in Clause 4. These hazards have been identified by risk assessment according to EN ISO 12100-2 and require actions to avoid the hazard, or to reduce the risk, which are covered in Clause 5. 1.5 The safety requirements are based on the assumption that the dock levellers are regularly maintained by competent persons to the instructions of the manufacturer and that the operating person has been instructed in the use of the dock leveller. 1.6 This European Standard is not applicable to dock levellers which are manufactured before the date of its publication as EN. 1.7 This European Standard deals with all significant hazards, hazardous situations and events relevant to dock Levellers, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).

Dock levellers - Safety requirements; English version of DIN EN 1398:2009-07

DIN EN 1526:2009 工业卡车的安全.卡车自动化功能的辅助要求(含修改件A1:2008),英文版本DIN EN 1526:2009-07

1.1 This European Standard deals with the controls and control systems for automated functions of industrial trucks with an operator (hereinafter referred to as "trucks"). 1.2 The control system is generally part of the truck but can include components external to the truck, eg for the guidance means for automated steering. 1.3 This European Standard deals with the technical requirements to minimise the specific hazards listed in clause 4 which can arise during the commissioning, operation and maintenance of automated functions of trucks when carried out in accordance with the specifications given by the manufacturer or his authorised representative. In addition, trucks should comply as appropriate with EN 292 for hazards not covered by this standard or the applicable companion standards. 1.4 This European Standard is not applicable to safety equipment (e.g. devices for height limitation, speed limitation) used to override driver control. 1.5 This European Standard deals with the hazards related to the controls and control systems for the following automated functions: -- Steering (direct mechanical guidance is excluded); -- Travel; -- Lifting and lowering operations; -- Load manipulations, e.g. rotation, reach, slewing, tilting, clamping; -- Combination and/or sequence of the above movements. This standard must be used in conjunction with one or more of the applicable companion standards listed in the Foreword. 1.6 This European standard does not establish the additional requirements for the following: a) Operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); b) Operation in environments subject to special rules (e.g. potentially explosive atmospheres);c) Electromagnetic compatibility; d) Transportation of passengers; e) Handling of loads the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials). Limitations in the scopes of the applicable companion standards also apply to this standard.

Safety of industrial trucks - Additional requirements for automated functions on trucks(includes Amendment A1:2008); English version of DIN EN 1526:2009-07

BS EN 528:2008 轨道式存储和卸取设备.安全性要求

This standard applies to all types of S/R machines, restricted to the rails on which they travel within and outside the aisles, which embody lifting means and may embody lateral handling facilities, for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic. This standard does not apply to free ranging industrial trucks or robots. References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines. This standard deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used as intended under the conditions foreseen by the manufacturer (see Clause 4). This standard applies to machines and equipment that are manufactured after the date of issue of this standard. Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A. Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. freezer applications, high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard also deals with the technical requirements for electromagnetic compatibility (EMC). Noise emitted by these machines is not considered as significant but as a relevant hazard. This means that the manufacturer of the machine is obliged to carry out noise reduction and indicate the noise level.

Rail dependent storage and retrieval equipment - Safety requirements

BS EN 1398:2009 装卸桥.安全要求

1.1 This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers. With the exception of: a) dock levellers for marine and aircraft applications; b) lifting tables; c) vehicle mounted tail lifts. NOTE 1 Requirements for lifting tables are laid down in EN 1570. NOTE 2 Requirements for vehicle mounted tail lifts are laid down in EN 1756-1. 1.2 This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1. 1.3 This European Standard specifies requirements in order to protect persons and objects against accidents and health problems and damage during use and operation of dock levellers. Persons to protect are: a) operators and users; b) maintaining and inspecting personnel; c) persons near the dock leveller. Objects to be protected are: d) goods on dock levellers; e) transport equipment on dock levellers. 1.4 The significant hazards of dock levellers are listed in Clause 4. These hazards have been identified by risk assessment according to EN ISO 12100-2 and require actions to avoid the hazard, or to reduce the risk, which are covered in Clause 5. 1.5 The safety requirements are based on the assumption that the dock levellers are regularly maintained by competent persons to the instructions of the manufacturer and that the operating person has been instructed in the use of the dock leveller. 1.6 This European Standard is not applicable to dock levellers which are manufactured before the date of its publication as EN. 1.7 This European Standard deals with all significant hazards, hazardous situations and events relevant to dock Levellers, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).

Dock levellers - Safety requirements

EN 474-3:2006+A1:2009 土方机械.安全.第3部分:装载机要求

This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part also deals with fork application, single heavy object handling application, object handling application and log handling. The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006+A1:2009. This part does not repeat the requirements from EN 474-1:2006+A1:2009, but adds or replaces the requirements for application for loaders. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of loaders. This European Standard is not applicable to loaders manufactured before the date of publication of this European Standard by CEN.

Earth-moving machinery - Safety - Part 3: Requirements for loaders

EN 474-6:2006+A1:2009 土方机械.安全.第6部分:翻斗车要求

This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to wheel and crawler dumpers as defined in EN ISO 6165:2006, including compact dumpers, and compact dumpers with standing operator when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to common requirements formulated in EN 474-1:2006+A1:2009. This part does not repeat the requirements from EN 474-1:2006+A1:2009, but adds or replaces the requirements for application for dumpers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of dumpers. Pedestrian controlled dumpers are excluded from the scope of this European Standard. This European Standard is not applicable to dumpers, manufactured before the date of publication of this European Standard by CEN.

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

DIN EN 528:2009 受铁轨约束的储藏和出库设备.安全要求

This standard applies to all types of SIR machines, restricted to the rails on which they travel within and outside the aisles, which embody lifting means and may embody lateral handling facilities, for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic. This standard does not apply to free ranging industrial trucks or robots. References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with SIR machines. This standard deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used as intended under the conditions foreseen by the manufacturer (see Clause 4). This standard applies to machines and equipment that are manufactured after the date of issue of this standard. Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A. Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. freezer applications, high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard also deals with the technical requirements for electromagnetic compatibility (EMC). Noise emitted by these machines is not considered as significant but as a relevant hazard. This means that the manufacturer of the machine is obliged to carry out noise reduction and indicate the noise level.

Rail dependent storage and retrieval equipment - Safety requirements; English version of DIN EN 528:2009-02

KS B ISO 3691:2008 工业用机动运货车.安全规范

이 표준은 동력 산업용 트럭의 제조, 적용, 운용과 보전에 대한 안전 요구 조건을 규정한다

Powered industrial trucks-Safety code

NF H92-100:2008 铁轨依存性存储和援救设备.安全要求

Rail dependent storage and retrieval equipment - Safety requirements.

JJG 687-2008 液态物料定量灌装机检定规程

本规程适用于液态物料定量灌装机（以下简称灌装机）的首次检定、后续检定和使用中的检验。

Verification Regulation of Quantitative Filling Machine for Liquid hfaterial

ISO 22915-2:2008 工业卡车.稳定性验证.第2部分:带桅杆的平衡力卡车

This part of ISO 22915 specifies the tests for verifying the stability of counterbalanced trucks with masts, equipped with fork arms or with load handling attachments. It is not applicable to those trucks designed for handling freight containers, dealt with by ISO 22915-91).

Industrial trucks - Verification of stability - Part 2: Counterbalanced trucks with mast

ISO 22915-3:2008 工业卡车.稳定性的验证.第3部分:前移式和插腿式卡车

This part of ISO 22915 specifies the tests for verifying the stability of reach trucks (with retractable mast or fork) and straddle trucks, equipped with tilting or non-tilting masts or fork arms and having a rated capacity up to and including 5 000 kg. It is also applicable to such trucks operating under the same conditions when equipped with load-handling attachments.

Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks

KS B ISO 2328:2008 叉车.挂钩型货叉和货叉架.安装尺寸规格

이 표준은 지게차 정격 하중 및 포크 형식과 관련하여 포크 및 다른 어태치먼트의 상호 호환

Fork-lift trucks-Hook-on type fork arms and fork arm carriages-Mounting dimensions

SANS 895:2008 气瓶用手推车

Covers dimensional and constructional requirements for gas cylinder trolleys used in hospitals for the conveyance of gas cylinders of water capacity 20 L.

Gas cylinder trolleys

BS EN 415-8:2008 包装机械的安全.捆包机

This European Standard applies to the following groups of machines:  powered hand strapping tools;  semi-automatic strapping machines;  automatic strapping machines;  horizontal pallet strapping machines;  vertical pallet strapping machines. The individual machines are described in 3.3. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines:  strapping tools that are powered exclusively by manual effort;  strapping machines that were manufactured before the date of publication of this document by CEN. This European Standard does not consider the following hazards:  the use of strapping machines in potentially explosive atmospheres;  the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;  hazards that can be associated with electromagnetic emissions from strapping machines;  hazards that can be associated with decommissioning strapping machines.

Safety of packaging machines - Part 8: Strapping machines

BS ISO 22915-20:2008 工业卡车.稳定性的验证.偏置载荷(利用偏置)特殊条件下运行的卡车.稳定性试验

Industrial trucks - Verification of stability - Trucks operating with offset load, offset determined by utilisation - Stability tests

YB/T 4085-2008 金属材料捆扎机械通用技术条件

General technical conditions of banding machines for metallic materials

ISO 22915-10:2008 工业卡车.稳定性的验证.第10部分:由动力装置侧移载荷堆垛的特殊条件下运行的卡车用附加稳定性试验

ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled or pedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks. This part of ISO 22915 specifies an additional test for verifying the stability of a laden truck fitted with a powered load-handling device, such as a sideshift, which can displace the centre of gravity to a substantial, predetermined extent from the longitudinal centre plane of the truck. Such devices are used in that mode for depositing and retrieving a load with the mast vertical or raised to maximum boom angle and extension. A displacement is considered to be a substantial displacement if it is more than -- 100 mm, for a truck with a rated capacity < 5 000 kg, 150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg, -- 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg, 350 mm, for a truck with a rated capacity ≥ 20 000 kg.

Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

ISO 22915-20:2008 工业卡车.稳定性的验证.第20部分:偏置载荷(利用偏置)特殊条件下运行的卡车用附加稳定性试验

ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled or pedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks. This part of ISO 22915 specifies an additional test for verifying the stability of a laden truck whose utilization creates the special operating condition whereby the load centre of gravity is substantially offset from the truck's longitudinal centre plane. It is applicable to the following types of truck: a) counterbalanced trucks, as specified in ISO 22915-2; b) reach (retractable mast or forks) and straddle trucks, as specified in ISO 22915-3; c) pallet stackers, as specified in ISO 22915-4; d) bidirectional and multidirectional (retractable mast or forks) trucks, as specified in ISO 22195-7; e) rough-terrain variable reach trucks 1); f) counterbalanced trucks fitted with articulated steering 1); g) variable reach trucks 1); h) rough-terrain trucks with mast. A load is considered to be substantially offset if displaced by more than 100 mm, for a truck with a rated capacity < 5 000 kg, 150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≥ 10 000 kg, 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg, 350 mm, for a truck with a rated capacity ≥ 20 000 kg.

Industrial trucks - Verification of stability - Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization