J83 仓储设备、装卸机械 标准查询与下载

ISO 22915-8:2008 工业卡车.稳定性的验证.第8部分:前倾起重杆和提高载荷堆垛的特殊条件下运行的卡车用附加稳定性试验

ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled or pedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled or driverless and designed to carry, tow, push, lift, stack or tier in racks. This part of ISO 22915 specifies an additional test for verifying the stability of a truck stacking with mast tilted forward and load in the elevated position. It is applicable to the following types of truck: a) counterbalanced trucks with tiltable masts, as specified in ISO 22915-2; b) reach (retractable mast or forks) and straddle trucks with tiltable masts, as specified in ISO 22915-3; c) pallet stackers with tiltable masts, as specified in ISO 22915-4; d) bidirectional and multidirectional (retractable mast or forks) trucks with tiltable masts, as specified in ISO 22195-7; e) rough-terrain trucks with tiltable masts 1); f) counterbalanced trucks fitted with articulated steering with tiltable masts 1).

Industrial trucks - Verification of stability - Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated

SAE J2518-2008 废料和原料装卸机提升能力的计算方法

This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J 2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted. The purpose of this SAE document is to establish a consistent, repeatable means of determining the lift capacity for the types of equipment contained therein.

Lift Capacity Calculation Method Scrap and Material Handlers

NF H92-101:2008 电动移动货架、传送带和存储升降机.安全要求

Power-operated mobile racking and shelving, carrousels and storage lifts - Safety requirements.

JB/T 8114-2008 电磁振动给料机

本标准规定了电磁振动给料机（以下简称电振给料机）的型式、基本参数和尺寸、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于以DZ型电磁振动器驱动的电振给料机，也适用于其他板弹簧结构的电振给料机。

Electromagnetic vibrating feeder

JB/T 7555-2008 惯性振动给料机

本标准规定了惯性振动给料机（以下简称给料机）的型式，基本参数，技术要求，试验方法，检验规则，标志、包装、运输和贮存。 本标准适用于以惯性振动器驱动的，将松散的块状、粉粒状物料由贮料仓或漏斗中均匀连续地给到受料装置中去的惯性振动给料机。给料机可以水平或倾斜安装。

Intertial vibrating feeder

JB/T 7329-2008 斗轮堆取料机械 术语

本标准规定了斗轮堆取料机械的类型、技术参数、一般概念、机构和零部件以及安全检测装置的常用术语及其含义。 本标准适用于各种类型的斗轮堆取料机、斗轮取料机和臂式堆料机。

Bucket wheel stacker reclaimers. Terms

JB/T 3002-2008 仓壁振动器 型式、基本参数和尺寸

本标准规定了仓壁振动器型式、基本参数和尺寸。 本标准适用于安装在散状物料仓的仓壁上使仓壁产生局部振动，破坏物料搭拱，促使物料流动的电磁式、惯性式的仓壁振动器。

Bin activator. Type, basic parameters and sizes

SANS 10388:2008 叉车的检查、检验及试验

Covers provisions for the inspection, examination and testing of all lift trucks in service. Excludes the maintenance of these trucks.

The inspection, examination and testing of lift trucks

JB/T 10823-2008 自动化立体仓库.术语

本标准规定了自动化立体仓库的型式、平面布局、储存方式、参数、堆垛机、货架以及运行操作中的常用术语。 本标准适用于由钢结构货架、巷道堆垛起重机（以下简称堆垛机）等设备组成的、货物存储作业以使用单元化集装器具（托盘）集装（以下称单元货物）为主的自动化作业的立体仓库。

Automated storage and retrieval systme.Vocabulary

JB/T 10822-2008 自动化立体仓库.设计通则

本标准规定了自动化立体仓库的分类、单元化集装器具（托盘）、货物形状、载荷、系统尺寸和安全等的设计规则。 本标准适用于由钢结构货架、巷道堆垛起重机（以下简称堆垛机）等设备组成的、货物存储作业以使用托盘集装（以下称单元货物）为主的自动化作业的立体仓库。

Automated storage and retrieval systme.General rules

JB/T 5319.1-2008 巷道堆垛起重机.术语

本标准规定了巷道堆垛起重机的型式、参数、概念、零部件、电气装置及安全保护装置等方面常用的术语。 本标准适用于立体仓库内向货架存取货物的巷道堆垛起重机（以下简称堆垛机）。

Storage/retrieval machine.Vacabulary

DIN EN 15095:2008 电动移动货架、传送带和存储升降机.安全要求

1.1 This European Standard deals with the safety requirements for the following types of power-operated storage equipment: -- storage carousels; --- storage lifts; -- mobile shelving, pallet racking and cantilever racking with the objective of eliminating or minimising the hazards described in Clause 4. These hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment. 1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is essential that additional hazard analysis and safety measures be taken into account, e.g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could generate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food. 1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A. 1.4 With regard to buildings and parts of buildings, this standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out. 1.5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard. 1.6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts. They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators). 1.7' This standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2.

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements; German version EN 15095:2007

BS EN 15095:2007 电动移动货架、传送带和存储升降机.安全要求

1.1 This European Standard deals with the safety requirements for the following types of power-operated storage equipment: ? storage carousels; ? storage lifts; ? mobile shelving, pallet racking and cantilever racking with the objective of eliminating or minimising the hazards described in Clause 4. These hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment. 1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is essential that additional hazard analysis and safety measures be taken into account, e. g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could generate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food. 1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A. 1.4 With regard to buildings and parts of buildings, this standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out. 1.5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard. 1.6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts. They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators). 1.7 This standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2.

Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements

BS EN 15095:2007+A1:2008 动力移动货架,传送带和存储升降机 安全性要求

1.1 This European Standard deals with the safety requirements for the following types of power-operated storage equipment: -storage carousels; -storage lifts; -mobile shelving, pallet racking and cantilever racking with the objective of eliminating or minimising the hazards described in Clause 4. These hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment. 1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is essential that additional hazard analysis and safety measures be taken into account, e.g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could generate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food. 1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A. 1.4 With regard to buildings and parts of buildings, this standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out. 1.5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard. 1.6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts. They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators). 1.7 This standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2.

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

SANS 2330:2007 铲车.货叉.技术特点及测试

Specifies manufacturing, testing and marking requirements for solid-section fork arms, for quantity production and with all types of mounting. These include, but are not limited to, hook, shaft or pin, bolt-on and roller type fork arms. By agreement between the fork arm manufacturer and the purchaser, these requirements may also be applied to fork arms not intended for quantity manufacture.

Fork-lift trucks - Fork arms - Technical characteristics and testing

JIS B 8942 ERRATUM 1:2007 勘误表

ERRATUM

SANS 13563-1:2007 单边负载叉车．第1部分：稳定性试验

Covers basic tests to verify the stability of single side loading fork-lift trucks with titable or non-titable mast or fork arms. It is applicable to trucks fitted with fork arms and/or attachements. This part of ISO 13563 is not applicable to trucks tha

Single side loading fork-lift trucks Part 1: Stability tests

SANS 13563-2:2007 单边负载叉车．第2部分：搬运6m及以上长度集装箱的叉车的附加稳定性试验

Specifies additional tests to verify the stability of single side loading fork-lift trucks when handling empty or laden freight containers of 6 m length and above. Specifies tests in addition to those specified in ISO 13563-1 (published in South Africa a

Single side loading fork-lift trucks Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above

SANS 24134:2007 工业卡车．卡车上自动功能的附加要求

Specifies the safety requirements for controls and control systems for automated functions of industrial trucks. This standard is intended for use in conjunction with one or more of the applicable parts of ISO 3691.

Industrial trucks - Additional requirements for automated functions on trucks

JB/T 10796-2007 电子颗粒计数机

本标准规定了电子颗粒计数机的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于以电子计数的方式将固体颗粒(如片剂、丸剂、胶囊、糖果、电子器件等)作为计量单位，按设定的数量装入容器中的机器，广泛应用于医药、食品、化工、日化、电子及五金等行业

Electronic granulation counter