J83 仓储设备、装卸机械 标准查询与下载

JB/T 10795-2007 粘流体灌装机

本标准规定了粘流体灌装机的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于对油类、日化、化工等行业的粘流液体(如植物油、润滑油、洗涤剂等有粘度的流体)进行自动灌装的机器

Rheid filling machine

JB/T 10799-2007 软管灌装封尾机

本标准规定了软管灌装封尾机的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于软管灌装封尾机，广泛应用于医药、食品、日化、化工等行业

Soft tube filling and sealing machine

JB/T 9086-2007 塑料袋热压式封口机

本标准规定了塑料袋热压式封口机的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于以塑料薄膜及其复合膜为包装材料的塑料袋热压式封口机，自动包装生产线上的封口机也可参照使用

Plastic bag heating sealer

JB/T 10800-2007 塑杯成型灌装封切机

本标准规定了塑杯成型灌装封切机的术语和定义、产品型号、型式与基本参数、技术要求、试验方法、检验规则及标志、运输、包装和贮存等要求 本标准适用于灌装酸奶、鲜奶、果汁等不含气液体的塑杯成型灌装封切机，应用于日化、医药、食品、化工等行业

Plastic cup forming-filling-sealing machine

JB/T 10798-2007 贴体包装机

本标准规定了贴体包装机的术语和定义、型号、型式和基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于专用贴体薄膜经加热和抽真空，使薄膜紧贴在被包装物表面并粘合在专用纸板上的贴体包装机

Skin packaging machine

JB/T 10797-2007 给袋式自动包装机

本标准规定了给袋式自动包装机的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求 本标准适用于给袋式自动包装机，广泛应用于食品、化工、农产品等行业的包装

Automatic bag filling and sealing machine

SANS 24135-1:2007 工业卡车．司机固定系统．第1部分：围式座位皮带

Specifies requirements and test methods for operator lap-type seat belt assemblies and their associated mounting structure on industrial trucks.

Industrial trucks - Specifications and test methods for operator restraint systems Part 1: Lap-type seat belts

SANS 476:2007 工业用货车．护顶架．规范和试验

Specifies the requirements and testing of overhead guards, operators' legs and feet protection, roll-over protection system (ROPS) and falling-object protection system (FOPS) for any type of high lift, rider operated, powered industrial truck with a lift

Industrial trucks - Overhead guards - Specification and testing

DIN EN 1459 Berichtigung 1:2007 工业卡车安全性.自力推进可变延伸卡车.技术勘误DIN EN 1459-2007

Safety of industrial trucks - Self-propelled variable reach trucks; German version EN 1459:1998 + A1:2006 + AC:2006, Corrigenda to DIN EN 1459:2007-04

ASME B30.25-2007 废料和物料装卸搬运设备

This standard applies to the construction, installation, operation, inspection, and maintenance of scrap handlers consisting of a base, a revolving upper structure with operator's station(s), and a front for lifting scrap or materials using attachments such as magnets and grapples, and any variations thereof in which the equipment retains the same fundamental characteristics. The provisions included in this standard apply to scrap handlers that are crawler mounted, rail mounted, wheel mounted, or on pedestal bases. The scope includes only handlers used to lift, lower, and swing scrap and material at various radii, which are powered by internal combustion engines or electric motors, and which are operated hydraulically. Hydraulic excavators designed for digging and trenching, forestry machines, machines designed for demolition, lattice and telescopic boom cranes, rail-mounted cranes for railway and automobile wreck clearance, and equipment covered by other B30 standards are excluded.

Scrap and Material Handlers Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

SANS 795:2007 手推车

Specifies the requirements for 5 types of wheelbarrows suitable for domestic, industrial, agricultural and building-site conditions.

Wheelbarrows

JB/T 2391-2007 500kg～10000kg平衡重式叉车技术条件

本标准规定了额定起重量为500kg～10000kg平衡重式叉车的要求、试验方法、检验规则与标志、包装、运输、贮存及质量保证期等。 本标准适用于额定起重量为500kg～10000kg内燃平衡重式叉车和500kg～5000kg蓄电池平衡重式叉车。

500kg～10000kg Counterbalanced fork lift trucks.Technical specifications

JB/T 10751-2007 蓄电池牵引车

本标准规定了额定挂钩牵引力不大于20kN的蓄电池牵引车（以下简称牵引车）的术语、基本参数、技术要求、试验方法、检验规则、标志与运输。 本标准适用于乘驾式额定挂钩牵引力不大于20kN的蓄电池牵引车。 本标准亦适用于额定推顶力不大于20kN（含 20kN）的蓄电池推顶车，额定挂钩牵引力不大于20kN的其他操纵形式蓄电池牵引车可参照使用。

Battery towing tractor

JB/T 10750-2007 内燃牵引车

本标准规定了额定挂钩引力不大于20kN的内燃牵引车术语、基本参数、技术要求、试验方法、检验规则、标志与运输。 本标准适用于额定挂钩牵引不大于20kN的牵引车。额定挂钩牵引力大于20kN的牵引车可参照使用。

Internel combustion towing tractor

NF H96-406:2007 叉车.钩接式叉臂和叉式托架.安装尺寸

Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions.

DIN EN 415-6:2007 包装机械的安全.第6部分:托盘式包装机械

This standard applies to the following groups of machines: - pallet banding machines; -stretch film palley wrapping machines; -stretch film hood application machines; -mobile stretch film wrapping machines; -semi automatic self driving stretch film wrapping machines; -shrink film pallet wrapping machines; -shrink film hood application machines; -film removing machines; -shrinking systems; -sleeve wrapping machines for product greater than 400mm in one direction; -product centralising machines. The individual machines are described in 3.2. This standard deals with safety requirements for machine design, construction, installation, commissioning,operation,adjustment,maintenance and cleaning of pallet wrapping machines. The extents to which hazards,hazardous situations and events are xovered are indicated in Clause 4. -

Safety of packaging machines - Part 6: Pallet wrapping machines; German version EN 415-6:2006

ISO 2328:2007 叉车.钩接式叉形臂和叉形臂托架.安装尺寸

This International Standard specifies the dimensions of, and additional requirements for, fork carriers and hook-on type fork arms, to permit the interchangeability of these fork arms and/or other attachments, relative to the truck-rated capacity and fork arm type, on fork-lift trucks up to and including 10 999 kg.

Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions

SAE J732-2007 装载机规范定义

This SAE standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped.

Specification Definitions Loaders

SAE J818-2007 装载机额定操作负载

This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. this standard is not to be construed as setting up test procedures or conditions.

Rated Operating Load for Loaders

DIN EN 1459:2007 工业卡车安全性.自力推进可变速叉车.EN 1459-1998 + A1-2006

This document applies for self-propelled seated rider operated variable reach trucks.

Safety of industrial trucks - Self-propelled variable reach trucks; German version EN 1459:1998 + A1:2006 + AC:2006