J87 印刷机械 标准查询与下载
共找到 363 条与 印刷机械 相关的标准，共 25 页
本标准规定了玻璃印刷机的术语和定义、组成与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于承印物为平板玻璃的带传输送料型的玻璃印刷机。
Printing machinery.Glass screen printer
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
本标准规定了热熔胶订包封皮机的型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于手工续书芯热熔胶订包封皮机（以下简称胶订机)。
Printing machinery.Hot melt adhesive book covering machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-29
- 实施
- 2011-04-01
This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process. It is applicable to a wide range of equipment used in the binding and finishing process.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-15
- 实施
- 2010-12-15
This International Standard specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. It is applicable to digital copying devices and multifunctional devices. It is intended to be used for black-and-white and colour digital copying devices and multifunctional devices of any underlying marking technology. This International Standard includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This International Standard is not intended to replace manufacturer's rated speeds.
Information technology - Office equipment - Method for measuring digital copying productivity of a single one-sided original
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-15
- 实施
- 2010-12-15
This part of ISO 12643 provides safety requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-12-15
- 实施
- 2010-12-15
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines; German version EN 1010-4:2004+A1:2009
- ICS
- 37.100.10;85.100
- CCS
- J87
- 发布
- 2010-12
- 实施
- 2010-12-01
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2 : printing and varnishing machines including pre-press machinery.
- ICS
- 37.100.10;85.100
- CCS
- J87
- 发布
- 2010-10-01
- 实施
- 2010-10-22
Graphic technology - Safety requirements for graphic technology equipment and systems - General requirements
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-07-31
- 实施
- 2010-07-31
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines; German version EN 1010-3:2002+A1:2009
- ICS
- 37.100.10;85.100
- CCS
- J87
- 发布
- 2010-06
- 实施
- 2010-06-01
Graphic technology - Safety requirements for graphic technology equipment and systems - Converting equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-03-31
- 实施
- 2010-03-31
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 2: Press equipment and systems
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-03-23
- 实施
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 1: General requirements
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-03-23
- 实施
General specification for nine-pin dot-matrix printer core
- ICS
- CCS
- J87
- 发布
- 2010-03-01
- 实施
- 2010-03-01
本标准规定了三面切书机的型式、基本参数、型号和名称、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于裁切书籍的三面切书机。
Printing machinery-Three-knife trimmers
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了上光机的术语和定义、型式、基本参数、型号和名称、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于单张纸紫外线固化和红外线干燥的涂布上光机。 本标准不适用于局部上光机。
Printing machinery-Coating machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了切纸机刀片的型式、要求、测量方法、检验规则、标志、包装、运输和贮存。 本标准适用于切纸机所配用的半成品刀片。
Printing machinery.Knives for cutting machines
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了瓦楞纸板卧式平压模切机的型式、要求、测量方法、检验规则、标志、包装、运输和贮存。 本标准适用于加工F、E、B、C、A、AB、ABB型和彩裱等瓦楞纸板，采用下输纸结构的卧式平压模切机。
Printing machinery.Flatbed platen type diecutting and creasing machine for corrugated board
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了印刷机械耗电技术条件的术语和定义、设备、要求和节电评价。 本标准适用于制版、印刷、印后加工设备及相关辅助设备。
Printing machinery.Technology conditions of power wasting
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了书帖堆积机(以下简称堆积机)的型式、基本参数、型号、要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于对轮转印刷机经折页排出的书帖、报纸等进行堆积计数或堆积计数与打捆的机器。
Printing machinery-Signature stacking machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了数字复印机、激光打印机光导鼓用清洁刮板的技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于对数字复印机、激光打印机光导鼓表面进行清洁、用聚氨酯橡胶(PU)材料制成的清洁刮板(以下简称刮板)。 定影辊清洁刮板、调节刮板可参考使用。
Specification for cleaning blade of photoconductor drums of digital copier and laser printer
- ICS
- 37.100.01
- CCS
- J87
- 发布
- 2010-02-11
- 实施
- 2010-07-01
