J88 环境保护设备 标准查询与下载



共找到 730 条与 环境保护设备 相关的标准,共 49

本标准规定了浅层气浮机的术语和定义、型式与基本参数、要求、试验方法与检验规则、标志、包装、运输和贮存。 本标准适用于各类工业废水,市政污水,河、湖藻类,面源修复等固、液分离用的浅层气浮机。

Technical specifications to shallow air flotation machine

ICS
13.020
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了中速磨煤机石子煤正压气力输送系统的术语和定义、结构和组成、型号、基本参数、技术要求、试验方法、检验规则、标志、使用说明书及包装、运输、存放。 本标准适用于单级输送当量距离小于400 m,垂直输送高度小于30 m的火力发电厂锅炉中速磨煤机的石子煤正压气力输送系统。

Positive pneumatic convey system for pebble coal of medium speed mill

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了袋式除尘器纯聚四氟乙烯覆膜滤料(以下简称产品)的术语和定义、使用场合和条件、规格、技术要求、检验方法、检验规则、包装、标志、运输和贮存。 本标准适用于以聚四氟乙烯基布、短纤维及微孔薄膜加工制成的针刺毡,产品可应用于环境保护和工业生产等领域的含尘气体过滤净化工程。

Pure polytetrafluoroethylene filter fabric laminated with membrane for bag filter

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了燃煤烟气脱硝失活催化剂的再生及处理的术语和定义、再生及处理方法、性能测试方法、性能要求、标牌、标志、包装、运输和贮存。 本标准适用于燃煤烟气脱硝技术装备所采用的催化剂的再生及处理。

Regeneration and disposition method of deactivated catalystfor coal-fired flue gas denitration system

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了大型生活垃圾焚烧炉炉排的术语和定义、型式与基本参数、一般要求、技术要求、检验规则、标志、涂装、包装和运输。 本标准适用于以生活垃圾为燃料的机械炉排式大型生活垃圾焚烧炉炉排,其他形式焚烧炉炉排可参照执行。

Technical requirements for grate of huge type WSM incinerator

ICS
13.030.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

Technical specification for domestic organic waste aerobic fermentation equipment

ICS
13.030.40
CCS
J88
发布
2015-04-30
实施
2015-08-01

本标准规定了电袋复合除尘器高压绝缘子瓷件(以下简称瓷件)的术语和定义、分类、技术要求、试验方法、检验规则、包装、标志和运输。 本标准适用工作温度不高于250℃的电袋复合除尘器中维持高压电场的各种瓷件。

High-voltage porcelain insulators of electrostatic-fabric integrated precipitator.Technical conditions

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电除尘器用煤气安全泄爆阀产品的术语和定义、结构型式与基本参数、技术要求、试验与检验、标志及涂装、包装与贮存,以及包装、贮存和运输。 本标准适用于钢铁冶金行业电除尘器用煤气安全泄爆装置,其他行业煤气电除尘器或煤气管路系统用煤气安全泄爆装置等可参照执行。

Gas safety explosion hatch for electrostatic precipitator

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了袋式除尘器滤袋用胀圈弹性测试方法的术语和定义、技术要求、检验规则。 本标准适用于袋式除尘器滤袋用胀圈弹性测试。

Packing ring elastic test method for the bag of fabric filter

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电除尘器钢结构设计规范的术语和定义、符号、设计的基本规定、结构上的荷载、材料选用、结构分析与构件计算、结构或构件变形的规定及钢结构的防护。 本标准适用于电除尘器钢结构主要承载结构部件的设计,其他种类的除尘器设计可参照执行。

Design code of steel structures for ESP

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了烟气干法脱硫脱硝装置专用设备高压回流式水喷枪(以下简称水喷枪)的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于烟气干法脱硫脱硝装置流量范围在5 m/h~50 m/h的水喷枪。

High pressure reflux lance for desulphurization and denitration

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了流化装置的术语和定义、组成、要求、试验方法与检验规则、标识、包装、运输和贮存。 本标准适用于半干法脱硫装置的流化装置。

Fluidized equipment.Technical requirements

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电袋复合除尘器气流分布模拟试验的术语和定义、试验方法、技术要求、评判标准。 本标准适用于电袋复合除尘器气流分布CFD模拟试验。

Flow field simulation technical specification for electrostatic fabric integrated precipitator

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电袋复合除尘器电气控制装置(以下简称电气控制装置)的术语和定义、产品型号、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于电袋复合除尘器电气控制装置。

Electrical control device of electrostatic-fabric integrated precipitator

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电袋复合除尘器袋区(以下简称袋区)的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于电力、建材、冶金、化工、轻工等行业的除尘、物料回收工程中使用的电袋复合除尘器袋区。

Fabric field area technical conditionsof electrostatic-fabric integrated precipitator

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了涡凹气浮机的型式与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水量中等、悬浮物浓度较高的废水处理用涡凹气浮机。

Technical specifications to the cavitation air flotation machine

ICS
13.020
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电凝聚器的术语和定义,基本参数及组成,型号表示,使用条件,技术要求,试验方法,检验规则,包装、运输及贮存规范,调试、运行、维护安全技术规范。 本标准适用于双极性荷电的电凝聚器。

Electrostatic agglomeration device

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

本标准规定了电袋复合除尘器电场区的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电力、建材、冶金、化工、轻工等行业的除尘和物料回收工程中使用的电袋复合除尘器电场区(以下简称电区)。

Electric area technical conditions of electrostatic-fabric integrated precipitator

ICS
13.020.40
CCS
J88
发布
2015-04-30
实施
2015-10-01

This European Standard applies to surface cleaning machines for outdoor applications in public areas, roads, airports and industrial complexes. Cleaning machines for winter maintenance and/or indoor applications are not included within the scope of this European Standard. Surface cleaning machines in terms of this standard, are self-propelled, truck mounted, attached sweeping equipment or pedestrian controlled as disclosed in EN 15429-1. Surface cleaning machines by way of their function, have specialized equipment necessary to perform their task. This European Standard deals with graphical symbols uniquely used to indicate the function and status of operator controls and tell-tale displays of the specialized equipment. Common symbols that are included in other standards and applied to a wider range of machines are not included. Typically, symbols in this category that may equally be applied to surface cleaning machines can be found in ISO 2575 Road vehicles - Symbols for controls, indicators and tell-tales, and ISO 6405 Earth moving machinery - Symbols for operator and other displays - Part 1: Common Symbols. This European Standard does not apply to machines or components that are specifically designed for cleaning tramlines and rail tracks. Industrial sweepers, within the scope of EN 60335-2-72 are excluded from this European Standard. This European Standard applies to machines manufactured after the approval date of the standard by CEN.

Sweepers - Part 4: Symbols for operator controls and other displays

ICS
01.080.20;43.160
CCS
J88
发布
2015-03
实施

Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for exposure measurement

ICS
13.040.30;13.320
CCS
J88
发布
2015-02-28
实施
2015-02-28



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号