J94 燃油供给系统 标准查询与下载

KS R ISO 7299:2005 道路车辆.燃油喷射泵端面装配的法兰盘

이 규격은 디젤(압축 점화) 기관에서 사용하기 위하여 다음에 대한 치수 요구 사항을 규 정

Diesel engines-End-mounting flanges for fuel injection pumps

KS R ISO 7030:2005 道路车辆.12、13、14、15、16、17、18和19型螺旋拧入式喷嘴器件

이 규격은 내연 압축 점화 (디젤) 기관에서 분사 노즐 홀더의 장착에 대한 치 수 요구 사

Road vehicles-Screw-mounted injection nozzle holders,types 12, 13, 14, 15, 16, 17, 18 and 19

KS R ISO 8356:2005 道路车辆.柴油机.22型螺旋拧入式喷油器

이 규격은 디젤 기관의 인젝터 마운팅에 필요한 치수의 요구 조건에 대하여 규정한다. 적

Road vehicles-Diesel engines-Screw-in injector, type 22

KS R ISO 13555-2:2005 柴油机.柴油喷注设备动态计时的检验规程.第2部分:试验方法

이 규격은 디젤 기관에 부착된 연료 분사 장치의 동적 세팅을 점검하기 위한 절차의 일부로서

Diesel engines-Procedure for checking the dynamic timing of diesel fuel injection equipment-Part 2:Test method

KS R ISO 13948-2:2005 柴油机.燃料喷射泵和燃料喷射器低压连接.第2部分:无螺纹(推进式)连接件

이 규격은 저압 연료 공급의 연결을 위하여 디젤 연료 분사 펌프와 연료 분사기에 사용된 기

Diesel engines-Fuel injection pumps and fuel injector low-pressure connections-Part 2:Non-threaded(push-on) connections

KS R ISO 9103:2005 道路车辆.压燃式发动机.23型螺纹拧入式喷油器

이 규격은 압축 착화(디젤) 기관상에서의 인젝션 노즐 홀더의 설치를 위한 치수 요건을 규

Road vehicles-Compression-ignition engines-Screw-in injection nozzle holder, type 23

KS B 6312-2005 空气预热器试验方法

이 규격은 고체, 액체 및 기체 연료를 사용하는 산업용 연소 설비에 사용되는 배열 회수 장

Testing methods for air preheaters

SAE J2587-2005 最佳燃油箱送进装置闭合度

This practice describes recommended performance requirements of fuel tank closures used in conjunction with fuel level senders and fuel delivery systems. It provides guidelines that ssure interchangeability and compatibility between fuel tanks and fuel pump/sender closure systems without specifying a specific closure system design. These systems may be used in rigid fuel tank systems made of plastic or metal. Complete details of specific designs shall be established by mutual agreement between customer and supplier: a. The closure system, durability and reliability with respect to vehicle SHED measurements, fuel system/crash integrity, LEV - II useful life; b. assembly and service ease and reliability; d. packaging of fuel tanks and their sending units; d. interchangeability of sender closures between various fuel tank designs.

Optimized Fuel Tank Sender Closure

DIN EN 230:2005 燃油器用自动燃烧器控制系统

This document specifies the requirements, operating conditions and test methods for burner control systems for automatic and semi-automatic oil burners with or without fans. It also applies to dual fuel burners, for use with either oil or gaseous fuels, when operating on oil This document covert tape testing only. This document also applies to automatic burner control systems, programming units or flame detector devices that include additional functions. Automatic burner control systems utilising thermo-electric flame supervision devices are not covered by this document

Automatic burner control systems for oil burners; English version of DIN EN 230

JB/T 3923-2005 柴油机喷油泵联轴器.型式及基本尺寸

本标准规定了供中、小功率柴油机选用的柱塞式喷油泵联轴器(以下简称联轴器)的型式及基本尺寸。 本标准适用于刚性牙嵌式与弹性片式喷油泵联轴器。

Model and dimensions of pump drive coupling for diesel engines

JB/T 5176-2005 单柱塞式分配泵总成.技术条件

本标准规定了单柱塞式分配泵总成(以下简称分配泵)的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于高速轻型柴油机用的分配泵。

Technical specifications for single plunger distributor fuel injection pump

JB/T 5174-2005 喷油嘴偶件.型式及连接尺寸

本标准规定了中、小功率柴油机用安装T系列、S系列、P系列和J系列喷油嘴偶件型式及其连接尺寸。 本标准适用于轴针式(包括节流轴针式)、孔式和长型孔式喷油嘴偶件三种型式。

Dimensions for mounting and connection of injector nozzle

JB/T 5173-2005 喷油器总成.安装方式及连接尺寸

本标准规定了中、小功率柴油机用安装T系列、S系列、P系列和J系列喷油嘴偶件的喷油器总成安装方式及其连接尺寸。 本标准适用于中、小功率柴油机用安装T系列、S系列、P系列和J系列喷油嘴偶件的喷油器总成。

Dimensions for mounting and connection of nozzle and holder assemblies

JB/T 6295-2005 柱塞式喷油泵.安装型式及连接尺寸

本标准规定了柱塞式喷油泵与柴油机连接部分的安装型式及连接尺寸。 本标准适用于中、小功率柴油机柱塞式喷油泵(以下简称喷油泵)。

Dimensions for mounting and connection of jerk fuel injection pump

CSA B140.7-05-2005 燃油设备:真气热水锅炉.第2版.代替B14.7.1:1976 和 B14.7.2:1967

Canadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve co

Oil-burning equipment: Steam and hot-water boilers Second Edition [Superseded: CSA B140.7.1-1976, CSA B140.7.2-1967]

ISO 19013-1:2005 内燃机燃料回路用橡胶软管和管.规范.第1部分:柴油

This part of ISO 19013 specifies the requirements for rubber tubing and hoses used in diesel fuel circuits for internal combustion engines. The diesel fuels covered include "bio-diesels" which consist of the methyl ester of rape seed oil at levels up to 20 % by volume in conventional diesel fuels. In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a "line call-out" of tests for specific applications where these are not covered by the main types specified (see example in Annex E). In this case, the hose or tubing would not carry any marking showing the number of this part of ISO 19013 but may detail the OEM's own identification markings as shown on their part drawings.

Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels

ISO 19013-2:2005 内燃机燃料回路用橡胶软管和管.规范.第2部分:汽油

This part of ISO 19013 specifies the requirements for rubber tubing and hoses used in gasoline fuel circuits for internal combustion engines. The gasoline fuels covered include those containing oxygenates such as methanol and methyl tertiary-butyl ether (MTBE) and fuels that have become oxidized ("sour gas"). In addition, this specification may also be applied as a classification system to enable original equipment manufacturers (OEMs) to detail a "line call-out" of tests for specific applications where these are not covered by the main types specified (see example in Annex G). In this case, the hose or tubing would not carry any marking showing the number of this part of ISO 19013 but may detail the OEM's own identification markings as shown on their part drawings.

Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels

ISO 13296:2005 柴油发动机.高压燃料喷射管组件.一般要求和尺寸

This International Standard specifies dimensions and requirements for high-pressure fuel injection pipe assemblies and assembled pipe sets used on diesel (compression-ignition) engines. NOTE High-pressure pipes for use on test benches are specified in ISO 4093.

Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions

WJ 1623-2005 柴油滤清器试验方法

Test method for diesel oil filter

KS R ISO 8218:2004 道路车辆.前照灯近光用水平调节装置

이 규격은 KS R ISO 7227에 명시한 높이 조정 장치의 수동 조정에 관한 사항을 토

Road vehicles-Levelling devices for headlamp dipped beam