K12 带绝缘层电线 标准查询与下载

SAE AS81044/7A-2011 600 V 150℃正常重量交联聚烯烃绝缘的高强度镀银铜合金电线

Wire, Electric, Crosslinked Polyalkene Insulated, Silver- Coated High Strength Copper Alloy, Normal Weight, 600-Volt, 150°C

JIS C 3216-3 ERRATUM 1:2011 勘误表

ERRATUM

SAE AS22759/47-2011 200℃, 600 V 80微英寸镀银高强度铜合金含氟聚合物绝缘交联改良型四氟乙烯低氟轻型电线

Wire, Electrical, Fluoropolymer-Insulated Crosslinked Modified ETFE, Low Fluoride, Lightweight, 80 Microinch Silver-Coated High-Strength Copper Alloy 200 °C, 600 Volt

SAE AS81044A-2011 铜或铜合金,交联聚烯烃,交联烷烃酰亚胺聚合物或聚芳绝缘电线

This specification covers single conductor electric wires made as specified in the applicable specification sheet with tin-coated, silver-coated, or nickel-coated copper or copper alloy conductors insulated with crosslinked polyaklene, crosslinked alkane-imide polymer, or polyarylene. The crosslinked polyalkene, crosslinked aklane-imide polymer, or polyarylene may be used alone or in combination with other insulation materials as specified in the specification sheet.

Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy

IEC 60851-5:2011 绕组线测试方法.第5部分:电气性能

Winding wires - Test methods - Part 5: Electrical properties

SAE AS81822/4A-2011 带聚酰亚胺涂层的挤压聚四氟乙烯(PTFE)无焊包装绝缘层与银涂层导线组成的电线

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Wire, Electrical, Solderless Wrap, Polyimide Coating Over Extruded Polytetrafluoroethylene (PTFE) Insulation, Silver Coated Solid Conductor

SAE AS81822/1A-2011 无焊绕接,聚对苯二甲酸乙二酯聚酯叠层带绝缘,镀银实心导体电线

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Wire, Electrical, Solderless Wrap, Polyethylene Terephthalate-Polyester Laminated Tape Insultation, Silver Coated Solid Conductor

DB43/T 647-2011 烟花爆竹电点火头用聚氯乙烯绝缘电线

Fireworks firecracker electric ignition head with PVC insulated wire

NF C34-540*NF EN 50540:2011 架空线导线.钢芯铝绞线(ACSS).

Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS).

IEC 60851-5:2008/AMD1:2011 绕组线.试验方法.第5部分:电气性能

This part of IEC 60851 specifies the following tests:?C Test 5 : Electrical resistance;?C Test 13: Breakdown voltage;?C Test 14: Continuity of insulation;?C Test 19: Dielectric dissipation factor;?C Test 23: Pin hole.For definitions@ general notes on methods of test and the complete series of methods of test for winding wires@ see IEC 60851-1.

Winding wires - Test methods - Part 5: Electrical properties

DIN EN 60317-57:2011 特种绕组线规范.第57部分:220级聚酰胺-酰亚胺漆包圆铜线(IEC 60317-57-2010).德文版本EN 60317-57-2010

Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 (IEC 60317-57:2010); German version EN 60317-57:2010

DIN EN 60317-58:2011 特种绕组线规范.第58部分:220级聚酰-酰亚漆包扁铜导线(IEC 60317-58-2010).德文版本EN 60317-58-2010

Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 (IEC 60317-58:2010); German version EN 60317-58:2010

JB/T 5331-2011 潜油电机用特种聚酰亚胺薄膜绕包铜圆线

本标准规定了潜油电机用特种聚酰亚胺薄膜绕包铜圆线的术语和定义、代号、产品表示方法、技术要求、试验方法、检验项目、检验规则、标志及包装。 本标准适用于H级及以下潜油电机及类似的充油型特殊电机用绕包线，也适用于潜油泵电缆绝缘线芯用绕包线。

Particular types of aromatic polyimide tape wrapped round copper wire for submersible motor

BS EN 60264-4-1:2010 绕组线的包装.试验方法.热塑性材料交货线盘

Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials

JIS C 3216-6:2011 绕组线.试验方法.第6部分:热力性能

Winding wires -- Test methods -- Part 6: Thermal properties

JIS C 3216-5:2011 绕组线.试验方法.第5部分:电气性能

Winding wires -- Test methods -- Part 5: Electrical properties

JIS C 3216-1:2011 绕组线.试验方法.第1部分:总则

Winding wires -- Test methods -- Part 1: General

JIS C 3216-3:2011 绕组线.试验方法.第3部分:机械性能

Winding wires -- Test methods -- Part 3: Mechanical properties

JIS C 3216-2:2011 绕组线.试验方法.第2部分:尺寸规格的测定

Winding wires -- Test methods -- Part 2: Determination of dimensions

JIS C 3216-4:2011 绕组线.试验方法.第4部分:化学特性

Winding wires -- Test methods -- Part 4: Chemical properties