K20 旋转电机综合 标准查询与下载

IEC 61800-7-201:2007 可调速电力传动系统.第7-201部分:电力传动系统用剖面图的使用和通用接口.1型剖面图的规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies profile type 1 for Power Drive Systems (PDS). Profile type 1 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification

IEC 61800-7-202:2007 可调速电力传动系统.第7-202部分:电力传动系统用剖面图的使用和通用接口.2型剖面图的规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies profile type 2 (CIP Motion™) for Power Drive Systems (PDS). Profile type 2 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification

BS EN 61800-5-1:2007 可调速的电驱动系统.安全性要求.电,热和能量

This part of IEC 61800 specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction and electric vehicle drives. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input voltages up to 35 kV, 50 Hz or 60 Hz and output voltages up to 35 kV. Other parts of IEC 61800 cover rating specifications, EMC, functional safety, etc. The scope of this part of IEC 61800 does not include devices used as component parts of a PDS if they comply with the safety requirements of a relevant product standard for the same environment. For example, motors used in PDS shall comply with the relevant parts of IEC 60034. Unless specifically stated, the requirements of this International Standard apply to all parts of the PDS, including the CDM/BDM (see Figure 1). NOTE In some cases, safety requirements of the PDS (for example, protection against direct contact) can necessitate the use of special components and/or additional measures.

Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy

ANSI/IEEE 421.1:2007 同步电机励磁系统的标准定义

Defines elements and commonly used components in excitation control systems and contains definitions for excitation systems as applied to synchronous machines.

Standard Definitions for Excitation Systems for Synchronous Machines

SANS 60034-8:2007 旋转电机．第8部分：旋转电机的线端标记与旋转方向

Applies to a.c. and d.c. machines and specifies rules for the identification of winding connection points, marking of winding terminals, direction of rotation, relationship between terminal markings and direction of rotation, terminal marking of auxiliar

Rotating electrical machines Part 8: Terminal markings and direction of rotation

IEC 60034-12:2007 旋转电机.第12部分:单速三相笼型感应电动机的起动性能

This International standard specifies the parameters for four designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034-1 that: • have a rated voltage up to 1 000 V; • are intended for direct-on-line or star-delta starting; • are rated on the basis of duty type S1; • are constructed to any degree of protection. The standard also applies to dual voltage motors provided that the flux saturation level is the same for both voltages and to motors having type of protection 'e – increased safety' with temperature classes T1 to T3 complying with IEC 60079-0 and IEC 60079-7. NOTE 1 It is not expected that all manufacturers will produce machines for all four designs. The selection of any specific design in accordance with this standard will be a matter of agreement between the manufacturer and the purchaser. NOTE 2 Designs other than the four specified may be necessary for particular applications. NOTE 3 The values of torque and apparent power given in this standard are limiting values (that is, minimum or maximum without tolerance), but it should be noted that values given in manufacturers' catalogues may include tolerances in accordance with IEC 60034-1. NOTE 4 The values tabled for locked rotor apparent power are based on r.m.s. symmetrical steady state locked rotor currents; at motor switch on there will be a one-half cycle asymmetrical instantaneous peak current which may range from 1,8 to 2,8 times the steady state value. The current peak and decay time are a function of the motor design and switching angle.

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

IEC 60034-2-1:2007 旋转电机.第2-1部分:试验(不包括牵引车辆用电机)中损失和功效的测定用标准方法

This part of IEC 60034 is intended to establish methods of determining efficiencies from tests． and also to specify methods of obtaining specific losses． This standard applies to d．C．machines and to a．c．synchronous and induction machines of all sizes within the scope of IEC 60034—1． NOTE These methods may be applied to other types of machines such as rotary converters,a c．commutator motors and single—phase induction motors.

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

DIN EN 60034-1 Berichtigung 1:2007 旋转电机.第1部分:测定和性能

Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:2004); German version EN 60034-1:2004, Corrigenda to DIN EN 60034-1 (VDE 0530-1):2005-04

DIN EN 60034-5:2007 旋转电机.第5部分:旋转电机总体设计给出的保护等级(IEC 60034-5:2000 + Corrigendum 2001 + A1:2006)

Rotating electrical machines - Part 5: Degrees of protection provided by integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2000 + Corrigendum 2001 + A1:2006); German version EN 60034-5:2001 + A1:2007

BS EN 60034-8:2007 旋转电机.终端标记和旋转方向

This part of IEC 60034 applies to a.c. and d.c. machines and specifies a) rules for the identification of winding connection points; b) marking of winding terminals; c) direction of rotation; d) relationship between terminal markings and direction of rotation; e) terminal marking of auxiliary devices; f) connection diagrams of machines for common applications. Turbine-type synchronous machines are excluded from this standard.

Rotating electrical machines - Terminal markings and direction of rotation

SANS 60034-28:2007 旋转电机．第28部分：低压三相鼠笼型感应电动机等效电路图数量测定的试验方法

Applies to three-phase low-voltage cage induction motors of frame numbers 56 to 400 as specified in IEC 60072-1 (published in South Africa as an identical adoption under the designation SANS 60072-1). Establishes procedures to obtain values for elements

Rotating electrical machines Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

SANS 60034-27:2007 旋转电机．第27部分：在旋转电机绝缘子绕组上的局部离线放电测量

Provides a common basis for measuring techniques and instruments, the arrangement of test circuits, normalization and testing procedures, noise reduction, the documentation of test results, and the interpretation of test results with respect to partial d

Rotating electrical machines Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines

NF C51-328:2007 旋转电机.第28部分:三相低压鼠笼式感应电动机等效电路图数量测定的试验方法

Rotating electrical machines - Part 28 : test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors.

NF C51-124/A1:2007 旋转电机.第14部分:轴高56mm及以上的特定电机的机械振动.振动强度的测量、评定和限值

Rotating electrical machines - Part 14 : mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity.

DIN EN 60034-26:2007 旋转电机.第26部分:非平衡电压对三相鼠笼式感应电动机性能的影响(IEC 60034-26-2006)

Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors (IEC 60034-26:2006); German version EN 60034-26:2006

IEC 2/1463/CD:2007 IEC/TS 60034-20-2, Ed. 1:旋转电机.第20-2部分:无电刷永久磁铁伺服电动机的性能和测试用指南

IEC/TS 60034-20-2, Ed. 1: Rotating electrical machines - Part 20-2: Guide for the performance and testing of brushless permanent magnet servo motors

UL 1004-5 BULLETIN-2007 消防泵电动机的UL安全标准(评审到期日:2008年1月15日)

The following changes in requirements are being proposed: 1) For Preliminary Review Only: The proposed first edition of UL 1004-5, Fire Pump Motors, including the following changes: a) A change in the mathematical formula for slip; b) Elimination of the Drip Test; and c) Requirements for inverter duty motors

UL Standards for Safety Fire Pump Motors COMMENTS DUE: JANUARY 15, 2008

NF C51-119/A1*NF EN 60034-9/A1:2007 旋转电机.第9部分:噪音极限值

Rotating electrical machines - Part 9 : noise limits.

IEC 61800-5-1:2007 可调速电力传动系统.第5-1部分:安全要求.电、热和能量

This part of IEC 61800 specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction and electric vehicle drives. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input voltages up to 35 kV, 50 Hz or 60 Hz and output voltages up to 35 kV. Other parts of IEC 61800 cover rating specifications, EMC, functional safety, etc. The scope of this part of IEC 61800 does not include devices used as component parts of a PDS if they comply with the safety requirements of a relevant product standard for the same environment. For example, motors used in PDS shall comply with the relevant parts of IEC 60034. Unless specifically stated, the requirements of this International Standard apply to all parts of the PDS, including the CDM/BDM (see Figure 1). NOTE In some cases, safety requirements of the PDS (for example, protection against direct contact) can necessitate the use of special components and/or additional measures.

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

IEC 61800-5-2:2007 可调速的电动设备.第5-2部分:安全要求.功能

This part of IEC 61800 specifies requirements and makes recommendations for the design and development, integration and validation of PDS (SR)s in terms of their functional safety considerations. It applies to adjustable speed electric drive systems covered by the other parts of the IEC 61800 series of standard. This International Standard is only applicable where functional safety of a PDS (SR) is claimed and the PDS (SR) is operating in the high demand or continuous mode (see 3.10). For low demand applications, see IEC 61508. This part of IEC 61800, which is a product standard, sets out safety-related considerations of PDS (SR)s in terms of the framework of IEC 61508, and introduces requirements for PDS (SR)s as subsystems of a safety-related system. It is intended to facilitate the realization of the electrical/electronic/ programmable electronic (E/E/PE) elements of a PDS (SR) in relation to the safety performance of safety function(s) of a PDS. Manufacturers and suppliers of PDS (SR)s by using the normative requirements of this part of IEC 61800 will indicate to users (control system integrators, machinery and plant designers, etc.) the safety performance for their equipment. This will facilitate the incorporation of a PDS (SR) into a safety-related control system using the principles of IEC 61800, and possibly its specific sector implementations (for example IEC 61511, IEC 16513, IEC 62061) or ISO 13849. Conformity with this part of IEC 61800 fulfill all the requirements of IEC 61508 that are necessary for a PDS (SR).

Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional