K22 异步电机 标准查询与下载

JB/T 6222-1992 盘式制动异步电动机

本标准规定了盘式制动异步电动机的型式、基本参数与尺寸、技术要求、试验方法、检验规则以及标志、包装运输和贮存等要求。 本标准适用于盘式制动异步电动机。凡属本系列电动机所派生的各种电动机，也可参照执行。

Disc brake asynchronous motor

JB/T 6226-1992 大型火电设备风机用电动机技术条件

　　本标准规定了电动机的型号、型式、基本参数、运行条件、技术要求、检验规则以及标志与包装的要求。 　　本标准适用于大型火电设备(单机功率200MW及以上)的送风机、引风机、一次风机和循环风机用三相笼型异步电动机，也可用于拖动特性相似的其它机械配套电机。 　　凡本标准中未规定的事项均应符合GB 755中的有关规定。

Specifications for electric motors used in fans of large-scale thermal power equipment

JB/T 6201-1992 YBDC系列隔爆型电容起动单相异步电动机 技术条件（机座号71～1007）

Technical specifications of YBDC series flameproof capacitor start single-phase asynchronous motor (frame size 71~1007)

DL 410-1991 电工测量变送器运行管理规程

Rules of operational management of transducers for electrical measurement

JB/T 5536-1991 复印机用单相电容运转异步电动机

本标准规定了静电复印机用单相电容运转异步电动机的产品分类、技术要求、试验方法及检验规则，并对包装、标志、运输、贮存和质量保证期做了明确规定。 本标准适用于静电复印机用的单相电容运转异步电动机。

Asynchronous motors run with single-phase capacitors for copiers

JB/T 1011-1991 YC系电容起动异步电动机技术条件

Technical conditions of YC series capacitor start asynchronous motor

JB/T 1010-1991 YU系列电阻起动异步电动机技术条件

Specifications for YU series resistance start asynchronous motors

JB/T 1009-1991 YS系列三相异步电动机技术条件

本标准规定了YS系列三相异步电动机的型式、基本参数与尺寸、技术要求、试验方法与检验规则以及标志与包装的要求。

Technical conditions of YS series three-phase asynchronous motor

JB/T 1012-1991 YY系列电容运转异步电动机技术条件

Technical conditions of YY series capacitor running asynchronous motor

JB/T 5337-1991 YW系列无火花型三相异步电动机.技术条件(机座号80－315)

YW series non-sparking three-phase asynchronous motor Technical specification (Frame size 80－315)

IEEE 112-1991 多相感应电动机及发电机的试验规程

Test procedure for polyphase induction motors and generators

CSA C22.2 No.147-M90-CAN/CSA-1990 电动园艺器具.通用指令第1-4号.第5次修订

This Standard applies to motor—operated gardening appliances* intended for use on nominal system voltages of 250 V and less and in nonhazardous locations, and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. *F

Motor-Operated Gardening Appliances General Instruction No 1-4; Update No 5

CSA C22.2 No.195-M1987-1987 家用和商用食品加工电动装置.通用指令第1号

The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other

Appareils A Moteur De Preparation Des Aliments Pour Usages Domestique Et Commercial Fiche No 1

IEC TR 60892:1987 不平衡电压对三相鼠笼式感应电机性能的影响

Effects of unbalanced voltages on the performance of three-phase cage induction motors

DIN VDE 0530 Bb.1:1986 旋转电机.负载类型为S1的通用低压鼠笼式感应电机标准安装和标准使用条件指南

Rotating electrical machines; guide for reference installation and reference service-conditions for low voltage general purposes cage induction motors with duty-type S 1

CSA C22.2 No.145-M1986-1986 危险区域使用的电动机和发电机.第2版.通用指令第1-2号

Holes for fasteners for securing nameplates shall not pass through the enclosure walls unless they comply with the requirements of Clause 5.5.3, except that screws may be used in holes bottomed in the stator core of a motor if the joint between the s

Moteurs Et Generatrices Pour Emplacements Dangereux Deuxieme Edition; Fiche No 1

DIN 42681:1983 表面冷却滑环型间歇运行三相电机.结构型式IMB3.带滚动轴承.安装尺寸和功率配置

Totally enclosed fan-cooled three-phase induction motors with slipring-rotor, type IM B 3, with rolling bearings; mounting dimensions and relationship frame sizes - output ratings for intermittent dutyZusammenhang mit der von der International Electrotec

Totally enclosed fan-cooled three-phase induction motors with slipring-rotor; type IM B 3, with rolling bearings; mounting dimensions and relationship frame sizes; output ratings for intermittent duty

CSA C235-83-CAN3-1983 交流系统首选的电压标准,0 至 50,000 V电力输送与分配.第2版.通用指令第1号

The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1 973. It is a not-for-profit, nonstat

Preferred Voltage Levels for AC Systems, 0 to 50,000 V Electric Power Transmission and Distribution Second Edition; General Instruction No 1

CSA C22.2 No.183.2-M1983-1983 艇上直流电(DC)电气安装.通用指令第1号

General Instructions for CSA Standards are now called Updates. Please contact CSA Information Products Sales or visit www.ShopCSA.ca for information about the CSA Standards Update Service.

DC Electrical Installations on Boats General Instruction No 1

DIN 42677-3:1983 带滚动轴承的IM B 5、 IMB10、IMB14型全密封风扇冷却鼠笼式三相感应电机.相关框架规格－防火外壳体“d"型的额定输出功率

Totally enclosed fan-cooled three-phase induction motors with squirrel-cage, type IM B 5, IM B 10, IM B 14, with rolling bearings; relationship frame sizes - output ratings for type of protection flameproof enclosure "d"