K30 低压电器综合 标准查询与下载

KS C IEC 62196-1:2012 插头、插座、车辆耦合器和车辆插孔.电动车辆的传导充电.第1部分:通用要求事项

이 표준은 정격 동작 전압이 다음을 초과하지 않고, 제어 수단을 내장한 접촉식 충전시스템에

Plugs, socket-outlets, vehicle connectors and vehicle inlets-Conductive charging of electric vehicles-Part 1:General requirements

KS C IEC 60947-5-1:2012 低压开关设备和控制设备.第5-1部分:控制电路设备和开关元件.机电控制电路设备

이 표준은 개폐장치와 제어장치의 제어, 신호, 인터로크 등을 위한 제어회로 장치와 개폐 소

Low-voltage switchgear and controlgear-Part 5-1:Control circuit devices and switching element-Electromechanical control circuit devices

KS C IEC 60947-5-2:2012 低压开关设备和控制设备.第5-1部分:控制电路设备和开关元件.接近开关

이 표준은 금속 및/또는 비금속 물체의 존재를 검출하는 유도형 근접 스위치 및 용량형 근접

Low-voltage switchgear and controlgear－Part 5-2：Control circuit devices and switching elements－Proximity switches

KS C IEC 60947-4-3:2012 低压开关设备和控制设备.第4-3部分:接触器和电动机起动器.AC半导体控制器和非电动机负载用起动器

이 표준은 모터가 아닌 교류 반도체 부하제어장치와 온(ON) 상태와 오프(OFF) 상태로

Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads

IEC 61439-4:2012 低压开关设备和控制设备配件.第4部分:建筑工地用装配(ACS)的详细要求

NOTE Throughout this standard@ the abbreviation ACS (ASSEMBLY for construction site@ see 3.1.101) is used for a low-voltage switchgear and controlgear assembly intended for use on construction and similar sites. This part of 61439 defines the specific requirements of ACS as follows: ?C ASSEMBLIES for which the rated voltage does not exceed 1 000 V in case of a.c. or 1 500 V in case of d.c.; ?C ASSEMBLIES where the nominal primary voltage and the nominal secondary voltage of transformers incorporated in ACS are within the limits specified above; ?CASSEMBLIES intended for use on construction sites@ both indoors and outdoors@ i.e. temporary places of work to which the public do not generally have access and where building construction@ installation@ repairs@ alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out; ?C transportable (semi-fixed) or mobile ASSEMBLIES with enclosure. The manufacture and/or assembly may be carried out other than by the original manufacturer. This standard does not apply to individual devices and self-contained components@ such as motor starters@ fuse switches@ electronic equipment@ etc. which will comply with the relevant product standards. This standard does not apply to ASSEMBLIES for use in the administrative centres of construction sites (offices@ cloakrooms@ ASSEMBLY rooms@ canteens@ restaurants@ dormitories@ toilets@ etc.). Requirements for electrical protection provided by equipment manufactured according to this International Standard are given in IEC 60364-7-704.

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

NB/T 31040-2012 具有短路保护功能的电涌保护器

本标准适用于具有短路保护功能的电涌保护器(简称SPDI)。SPDI是指包含了用来限制电压和泄放电涌电流的限压型非线性元件,且与短路保护功能组合成为整体式的一种电器。SPDI具有对间接雷电和直接雷电效应或其他瞬态过电压电涌进行保护的功能,同时具有分断因其内部限压型非线性元件发生短路失效而产生的系统故障工频电流的能力。SPDI可连接到交流额定电压不超过440V (有效值)、50/60Hz的电路和设备。本标准的目的是规定SPDI的特性、标准试验方法和额定值。a)本标准中的SPDI仅属于II类试验的电压限制型的电涌保护器。b)本标准仅适用于内置短路保护功能的设计原理与符合GB 10963.1-2005的断路器相似的SPDI。对于内置短路保护功能部分,其设计原理与熔断体或其他与保护装置相似的SPDI正在考虑中。c)对于多极SPDI,如果包含了只能连接在N-PE之间的电涌保护器(简称SPD)模块,则此SPD 模块应符合 GB 18802.1-2011。

Surge protective devices with integral short circuit protection function

BS EN 60947-4-2:2012 低压开关设备和控制设备.接触器和电动机起动器.交流半导体电动机控制器和起动器

Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters

JIS C 8201-7-2:2012 低压开关设备和控制设备.第7-2部分:辅助设备.铜导体用保护导体端线模块

Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment -- Protective conductor terminal blocks for copper conductors

IEC 60947-4-1:2012 低压开关装置和控制装置.第4-1部分:接触器和电动机起动器.机电接触器和电动机起动器

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

IEC 60947-4-2:2011/COR1:2012 低压开关装置和控制装置.第4-2部分:接触器和电动机起动器.交流电(AC)半导体电动机控制器和起动器

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Corrigendum 1

DIN EN 62208:2012 低压开关设备和控制设备组件用空外壳.一般要求

Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements (IEC 62208:2011); German version EN 62208:2011

DIN EN 61439-2:2012 低压开关设备和控制设备组件. 第2部分: 电动开关设备和控制设备组件

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies (IEC 61439-2:2011); German version EN 61439-2:2011

DIN EN 60664-1 Bb.1:2012 低压系统内设备的绝缘配合.第2-1部分:应用指南.IEC 60664标准系列,尺寸标注范例和介质试验的应用说明

Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing (IEC/TR 60664-2-1:2011 + Cor. :2011)

DIN EN 61439-1:2012 低压开关设备及控制设备组件.第1部分: 一般原则

Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2011); German version EN 61439-1:2011

BS EN 61439-3:2012 低压开关设备和控制设备装配模块.普通人可操作配电屏(DBO)

Low-voltage switchgear and controlgear assemblies. Distribution boards intended to be operated by ordinary persons (DBO)

IEC 61439-6:2012 低压开关设备和控制设备配件.第6部分:中继系统(母线槽)

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)

BS EN 61915-2:2012 低压开关设备和控制设备.网路工业设备的外观.第2部分:启动器和类似设备的根设备外观

Low-voltage switchgear and controlgear. Device profiles for networked industrial devices. Root device profiles for starters and similar equipment

UL 1681-2012 布线设备配置

Wiring device configurations

JIS C 8435 ERRATUM 1:2012 勘误表

ERRATUM

IEC 60309-2:1999/AMD2:2012 工业用插头,插座和连接器.第2部分:针式和连接管附件用尺寸规格兼容性和可交换性要求.修改件2

This standard applies to plugs and socket-outlets@ cable couplers and appliance couplers with a rated operating voltage not exceeding 690 V@ 500 Hz and a rated current not exceeding 125 A@ primarily intended for industrial use@ either indoors or outdoors. NOTE ?All references for accessories with a rated current of more than 125 A in part 1 are not applicable to this part 2.?This standard applies to plugs and socket-outlets@ cable couplers and appliance couplers with pins and contact tubes of standardized configurations. This standard applies to plugs and socket-outlets@ cable couplers and appliance couplers@ hereinafter referred to as accessories@ for use when the ambient temperature is normally within the range ?C25 ??to 40 ?? The use of these accessories on building sites and for agricultural@ commercial and domestic applications is not precluded. This standard applies to accessories with screwless type terminals or insulation piercing terminals@ with a rated current up to and including 16 A for Series I and 20 A for Series II . NOTE? In the following countries@ this standard applies to accessories with screwless type terminals or insulation piercing terminals@ with a rated current up to and including 32 A for Series I and 30 A for Series II : DE@ IT. Socket-outlets or appliance inlets incorporated in or fixed to electrical equipment are within the scope of this standard. This standard also applies to accessories intended to be used in extra-low voltage installations. NOTE? This standard does not apply to accessories primarily intended for domestic and similar general purposes. In locations where special conditions prevail@ for example on board ship or where explosions are liable to occur@ additional requirements may be necessary.

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional compatibility and interchangeability requirements for pin and contact-tube accessories; Amendment 2