K30 低压电器综合 标准查询与下载

JIS C 8201-7-1:2010 低压开关设备和控制设备.第7-1部分:辅助设备.铜导线用接线板

Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors

DIN EN 60947-7-3:2010 低压开关设备和控制设备.第7-3部分:辅助设备.熔断器接线板用安全性要求

This standard applies to fuse terminal blocks with screw-type or screwless-type clamping units for the connection of rigid (solid or stranded) or flexible copper conductors for the reception of cartridge fuse-links in accordance with IEC 60127-2, intended primarily for industrial or similar use in circuits not exceeding 1000 V a.c., up to 1000 Hz or 1500 V d.c., and having a maximum short-circuit breaking capacity of 1500 A

Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks (IEC 60947-7-3:2009); German version EN 60947-7-3:2009

JIS C 8282-1 ERRATUM 1:2010 勘误表

ERRATUM

JIS C 8282-2-2 ERRATUM 1:2010 勘误表

ERRATUM

JIS C 8285 ERRATUM 1:2010 勘误表

ERRATUM

DIN EN 60947-5-1:2010 低压开关设备和控制设备.第5-1部分:控制电路设备和开关元件.(IEC 60947-5-1-2003 + A1-2009).德文版本EN 60947-5-1-2004 + Cor.2005 + A1-2009

This standard applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc. of switchgear and controlgear. It applies to control circuit devices having a rated voltage not exceeding 1000 V a.c. (at a frequency not exceeding 1000 Hz) or 600 V d.c. Major modifications are new EMC requirements and extended terminal markings. Further requirements have been replaced by normative references to IEC 60947-1 and IEC 60947-5-5.

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2003 + A1:2009); German version EN 60947-5-1:2004 + Cor.:2005 + A1:2009

SANS 60947-5-1:2010 低压开关设备和控制设备．第5-1部分：控制电路电器和开关元件．机电式控制电路电器

Applies to control circuit devices and switching elements intended for controlling, signalling and interlocking of switchgear and controlgear. Covers control circuit devices with a rated voltage not exceeding 1 000 V a.c. or 600 V d.c.

Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

DIN EN 60947-7-1:2010 低压开关设备和控制设备.第7-1部分:辅助设备.铜导线用接线板

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screwless-type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. lt applies to terminal blocks intended to connect round copper conductors, with or without special preparation, having a cross-section between 0, 2 mm2 and 300 mm2 (AWG 24/600 kcmil), intended to be used in circuits of a rated voltage not exceeding 1000 V a.c. up to 1000 Hz or 1500 V d.c.

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 60947-7-1:2009); German version EN 60947-7-1:2009

JIS C 8282-2-2:2010 家用和类似用途插头和插座.第2-2部分:设备插座的特殊要求

Plugs and socket-outlets for household and similar purposes -- Part 2-2: Particular requirements for socket-outlets for appliances

JIS C 8282-2-3:2010 家用和类似用途插头和插座.第2-3部分:固定装置用无互锁的开关插座用特殊要求

Plugs and socket-outlets for household and similar purposes -- Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

JIS C 8282-2-1:2010 家用和类似用途插头和插座.第2-1部分::熔断器插头的特殊要求

Plugs and socket-outlets for household and similar purposes -- Part 2-1: Particular requirements for fused plugs

JIS C 8285:2010 工业用插头、插座和耦合器

Plugs, socket-outlets and couplers for industrial purposes

JIS C 8282-1:2010 家用和类似用途插头和插座.第1部分:一般要求

Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements

JB/T 6452-2010 电力液压推动器基本技术要求

本标准规定了电力液压推动器的术语和定义、符号、分类、基本参数、工作条件、安装条件、技术要求和试验等内容。 本标准主要适用于额定电压交流50Hz、660V及以下，作为外抱块式制动器的驱动元件的推动器，也可适用于操动其他机械和机构的推动器。

Basic technical requirements for electric fluid power thruster

JB/T 10111-2010 灭弧罩陶瓷件及其材料

本标准规定了灭弧罩陶瓷件及其材料的基本要求,包括术语和定义、结构和性能要求及试验等内容。 本标准适用于以半干压法或热压铸法制造的工业用交流50Hz(或60Hz)、电压至1000V或直流1500V及以下的低压电器灭弧罩陶瓷件及其材料。

Arc chamber ceramic parts and materials

DIN VDE 0100-709:2010 低压电气设施.第7-709部分:特殊设施或场所的要求.小艇码头和类似场所(IEC 60364-7-709-2007,修改采用);German implementation HD 60364-7-709-2009

This standard provides requirements to circuits intended to supply pleasure craft or houseboats in marinas and similar locations.

Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations (IEC 60364-7-709:2007, modified); German implementation HD 60364-7-709:2009

DIN EN 62026-3:2010 低压开关设备和控制设备.控制器设备接口(CDIs).第3部分:设备网(IEC 62026-3-2008).德文版本EN 62026-3-2009

This part of IEC 62026 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two twisted shielded conductor pairs within one cable - one of these pairs provides a differential communication medium and the other pair provides power to the devices. This part establishes requirements for the interchangeability of components with such interfaces.

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet (IEC 62026-3:2008); German version EN 62026-3:2009

DIN EN 60947-3:2010 低压开关装置和控制装置.第3部分:负荷开关,断路开关,负荷断路开关和开关熔断器组(IEC 60947-3-2008).德文版本EN 60947-3-2009

This part of IEC 60947 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1000 V a.c. or 1500 V d.c.

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008); German version EN 60947-3:2009

IEC 60691:2002/AMD2:2010 热熔断体.要求及应用指南.修改件2

Scope and objectThis International Standard is applicable to thermal-links intended for incorporation in electrical appliances@ electronic equipment and component parts thereof@ normally intended for use indoors@ in order to protect them against excessive temperatures under abnormal conditions.NOTE 1 The equipment need not be designed to generate heat.NOTE 2 The effectiveness of the protection against excessive temperature logically depends upon the position and method of mounting of the thermal-link@ as well as upon the current which it is carrying.NOTE 3 Attention is drawn to the fact that the external creepage distances and clearances specified in Table 3 may in some cases be smaller than those required by certain appliance or equipment standards. In such cases@ additional means should be provided when a thermal-link is mounted in the equipment in order to adjust the creepage distances and clearances to the values required by the relevant equipment standard.This standard may be applicable to thermal-link for use under conditions other than indoors@ provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this standard.This standard may be applicable to thermal-links in their simplest forms (e.g. melting strips or wires)@ provided that molten materials expelled during function cannot adversely interfere with the safe use of the equipment@ especially in the case of hand-held or portable equipment@ irrespective of its position.This standard is applicable to thermal-links with a rated voltage not exceeding 690 V a.c. or d.c. and a rated current not exceeding 63 A.The object of this standard isa) to establlish uniform requirements for thermal-links@b) to define methods of test@c) to provide useful information for the application of thermal-links in equipment.This standard is not applicable to thermal-links used under extreme conditions such as corrosive or explosive atmospheres.This standard is not applicable to thermal-links to be used in circuits on a.c. with a frequency lower than 45 Hz or higher than 62 Hz.

Thermal-links - Requirements and application guide; Amendment 2

DIN VDE 0100-708:2010 低压设施.第7-708部分:特殊设施或场所的要求.旅游车停车场、野营停车场和类似场所 (IEC 60364-7-708-2007,修改采用).德文版本 HD 60364-7-708-2009

This standard includes requirements to final circuits intended to supply electrical installations in caravan parks

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations (IEC 60364-7-708:2007, modified); German implementation HD 60364-7-708:2009