K30 低压电器综合 标准查询与下载

NF C15-100/A1:2008 低音张力装置

Installations électriques à basse tension

JEM 1090-2008 电气设施用控制装置和设备的装置功能编号

Device function numbers for control devices and equipment of electrical installations

JEM TR 122-2008 交流金属包覆的开关装置和控制装置维护和检验指南

Guide for maintenance and inspection of a.c.metal-enclosed switchgear and controlgear

JEM 1334-2008 低压开关装置和控制装置附件的间隙和漏电距离

Clearances and creepage distances for low-voltage switchgear and controlgear assemblies

SANS 60320-1:2008 家用及类似用途的电器耦合器.第1部分:一般规定

Applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for the connection of a su

Appliance couplers for household and similar general purposes Part 1: General requirements

UL 870-2008 电线槽、辅助槽及有关配件

1.1 These requirements cover wireways, auxiliary gutters, and associated fittings to be employed in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements do not cover rigid or flexible conduit, surface raceways, underfloor raceways, nor other products of a similar nature that are covered by individual requirements.

Wireways, auxiliary gutters, and associated fittings

SANS 60947-5-2:2008 低压开关设备及控制设备.第5-2部分:控制电路设备及开关元件.接近开关

Applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the pre

Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches

JIS C 8201-5-5:2008 低压开关装置和控制器.第5-5部分:控制电路器件和切换元件.带有机械锁扣功能的电气紧急故障中断器件

この規格は，機械的ラッチング機能をもつ非常停止機器の，電気的・機械的構造及びその試験方法について規定する。

Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements -- Electrical emergency stop device with mechanical latching function

DIN EN 62026-1:2008 低压开关装置和控制器.控制器装置接口(CDIs).第1部分:一般规则

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules (IEC 62026-1:2007); German version EN 62026-1:2007

JIS C 8283-2-2:2008 家用及类似一般用途的电器连接器.第2-2部分:家用及类似设备的互连连接器

この規格は，家庭用及びこれに類する用途で，50 Hz又は60 Hz電源用の電気機器又はその他の電気装置と電源とを接続するためのもので，定格電圧250 V以下。定格亀流16A以下の接地接点付き又は接地接点なしの交流専用の2極の相互接続カプラについて規定する。

Appliance couplers for household and similar general purposes -- Part 2-2: Interconnection couplers for household and similar equipment

JIS C 8283-2-1:2008 家用和类似一般用途的电器连接器.第2-1部分:缝纫机连接器

この規格は.家庭ミシン用の特殊な機器用カプラで，定格電圧250 V以下，定格電流ユ没入以下の交流専用のミシン用カプラについて規定する。

Appliance couplers for household and similar general purposes -- Part 2-1: Sewing machine couplers

JIS C 8283-1:2008 家用和类似用途的电器连接器.第1部分:一般要求

この規格は，家庭用及びこれに類する用途で使用する50 Hz又は60 Hz電源用の電気機器又はその他の電気装置と電源用コードとを接統するためのもので.定格電圧250 V以下，定格電流16A以下の接地極付き又は接地極なしの交流専用の2極の機器用カプラに適用する。

Appliance couplers for household and similar general purposes -- Part 1: General requirements

JIS C 8283-2-101:2008 家用及类似一般用途的电器连接器.第2-101部分:电加热器用连接器

この規格は，家庭用及びこれに類する用途のクラス0用の電熱機器に使用されるカプラについて規定する。

Appliance couplers for household and similar general purposes -- Part 2-101: Couplers for electric heating appliances

JIS C 8283-2-4:2008 家用及类似一般用途的电器连接器.第2-4部分:依赖器具重量连接的连接器

この規格は，家庭用及びそれに類する一般用で，定格電圧が250 V以下で定格電流が16A以下の次のすべての条件を満たすカプラについて規定する。

Appliance couplers for household and similar general purposes -- Part 2-4: Couplers dependent on appliance weight for engagement

JIS C 8283-2-3:2008 家用及类似一般用途的电器连接器.第2-3部分:保护等级高于IPX0的电器连接器

この規格は，交流専用で，水の浸入に対してIPXI以上の保護等級をもち，50 Hz又は60 Hz電源の場合，定格電圧が250 V以下.定格電流がI0A以下で，低温用の2極の非可逆的〔極性を逆にして接統することができない)機器用カプラについて規定する。それらは，家庭用，商用及び軽工業用のクラスII電気機器に電源コードを接続するよう意図している。

Appliance couplers for household and similar general purposes -- Part 2-3: Appliance couplers with a degree of protection higher than IPX0

SANS 1973-7:2008 低压开关及控制设备总成.第7部分:内部故障导致的电弧放电条件下的测试要求

Applies to enclosed low-voltage switchgear and controlgear ASSEMBLIES manufactured in accordance with SANS 60439-1 (published in South Africa as an identical adoption of IEC 60439-1 under the designation SANS 60439-1). Is a technical report; contains a t

Low-voltage switchgear and controlgear ASSEMBLIES Part 7: Requirements for testing under conditions of arcing due to internal fault

SANS 60884-2-4:2008 家用及类似用途的插头及插座.第2-4部分:对安全特低压插座SELV的插头及插座的特殊要求

Applies to plugs, fixed or portable socket-outlets, and to socket-outlets for appliances from 6 V up to and including 48 V d.c. or a.c. (50/60 Hz) SELV with rated current of 16 A, intended for household and similar purposes, either indoors or outdoors.

Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets for SELV

DIN EN 60947-1:2008 低压开关装置和控制装置.第1部分:一般规则

Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2007); German version EN 60947-1:2007

BS EN 61915-1:2008 低压开关设备和控制装置 网络化工业设备的设备剖面图 设备剖面图改进的一般规则

The IEC 61915 series is intended to improve interoperability of devices, network tools and application software. This part of IEC 61915 defines a framework for common representation of networked industrial devices and provides a template for documenting such a representation, independent of the network used. This framework follows the principles given in IEC/TR 62390, the “Common automation device – Profile guideline”, and refers to ISO 15745, “Industrial automation systems and integration – Open systems application integration framework”. NOTE 1 The device profile format specified in this part of IEC 61915 is compatible with devices connected to both bit- and byte-oriented networks. This part of IEC 61915 applies to root device profiles, generic device profiles, and specific device profiles. The root device profiles will be published in subsequent parts of the IEC 61915 series. NOTE 2 This International Standard is specifically intended for products covered by the IEC 60947 series. NOTE 3 Organisations such as consortia are encouraged to use the rules defined in this part of IEC 61915 to develop generic device profiles for use within their own organisations. Users (product manufacturers and other organizations) should use the root device profiles together with the rules defined in this part of IEC 61915. This part of IEC 61915 allows users to make extensions to the root device profiles and/or generic device profiles. Where no suitable root device profile exists, the user may develop generic or specific device profiles using the rules defined in this part of IEC 61915. This part of IEC 61915 recommends the use of a profile exchange language for representation of the device profile information in order to facilitate the profile’s use by network tools and application software. NOTE 4 The types of devices may vary from simple devices, such as pilot lights, push-buttons and limit switches, to more complex devices with many bytes of information, such as motor controllers, semiconductor motor starters, etc.

Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles

ANSI/VITA 30.1-2008 冷却传导欧洲卡用2mm设备实施规程

Standardizes mechanical characteristics of conduction cooled Euroboards with 2mm connectors.

2mm Equipment Practice for Conduction Cooled Eurocard