K30 低压电器综合 标准查询与下载

IEC 60364-7-708:2007 低压电气设施.第7-708部分:特殊设施或场所的要求.旅游车停车场、野营停车场和类似场所

The particular requirements contained in this part of IEC 60364 apply only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations. NOTE 1 For the purposes of this part of IEC 60364, “caravan park” from now on will understand “caravan park and camping park and similar locations”. The particular requirements do not apply to the internal electrical installations of leisure accommodation vehicles, mobile or transportable units or residential park homes. NOTE 2 For electrical installations in leisure accommodation vehicles, see IEC 60364-7-721. NOTE 3 The electrical installations of residential park homes should comply with the general requirements of IEC 60364, together with the relevant particular requirements of Part 7. NOTE 4 Reference throughout this standard to other “Parts” refers to various parts in the IEC 60364 series. For the remainder of the electrical installation of caravan parks, the general requirements of IEC 60364 together with the relevant particular requirements of Part 7 apply.

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

DIN EN 60439-5:2007 低压开关设备和控制器组件.第5部分:公共网络电力分配用组件的特殊要求(IEC 60439-5-2006)

Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks (IEC 60439-5:2006); German version EN 60439-5:2006

DIN EN 62208 Berichtigung 1:2007 低压开关装置和控制装置组件用空外壳.一般要求.DIN EN 62208(VDE 0660-511)-2005的技术勘误

Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements (IEC 62208:2002); German version EN 62208:2003, Corrigenda to DIN EN 62208 (VDE 0660-511):2005-04

BS EN 60670-22:2006 家用和类似固定电力设备用电气附件的接线盒和接线外壳.第22部分:接线盒和接线外壳的特殊要求

This clause of Part 1 applies with the following addition: Add after the fourth paragraph: This standard applies to connecting boxes for junction(s) and/or tapping(s). NOTE Unless otherwise stated, throughout the document the term “boxes” also applies to “enclosures”.

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 22: Particular requirements for connecting boxes and enclosures

JB/T 10709-2007 低压电器通信适配器

本标准适用于低压电器数据通信不同总线协议转换的适配器（以下简称适配器）的工作条件、技术参数、性能要求及试验方法等。 DeviceNet-Modbus适配器用于将具有Modbus接口的低压设备接入DeviceNet总线，它向下通过Modbus协议，RS485串行接口与断路器等设备连接，向上通过DeviceNet接口接入DevceNet总线。通过对设备数据的合理安排和协议的转换，使通常的带Modbus接口的设备采集的数据可以传给 DeviceNet主站，将DeviceNet主站的命令下传给设备，并满足DeviceNet网络的基本要求。

Communication adapter for low-voltage electrical apparatus

JB/T 2930-2007 低压电器产品型号编制方法

本标准规定了低压电器产品型号编制方法及型号登记办法。 本标准适用于交流额定电压1000V及以下、直流额定电压1500V及以下的低压电器，如断路器、开关、隔离器、隔离开关、熔断器、熔断器组合电器、接触器、起动器、继电器、控制器、保护器、主令电器、电阻器、变阻器、自动转换开关电器、接线端子排、剩余电流动作保护器、总线电器、电磁铁、组合电器、辅助电器及其他电器。

Identification and registration methods for low-voltage apparatus

JB/T 10710-2007 低压电器电量监控器

本标准适用于一般低压电器电量监控器和基于现场总线的电量监控器，该监控器一般能检测电压、电流、有功功率、无功功率、功率因数、频率等参数，也可附带开关量输入和开关量输出，通过开关量输出实现某种保护或控制功能，可作为监控模块与低压电器配合使用，使不带智能控制的低压电器具有智能控制和网络控制功能。 本标准适用于参比频率为50Hz（或60Hz）的监控器。 本标准不适用于： ——接线端电压超过600V（多相监控器的线对线电压）； ——便携式监控器。 本标准规定了监控器的功能、技术要求、试验方法、检验规则等。

Power monitor for low-voltage electrical apparatus

NF C63-068/A1*NF EN 60947-8/A1:2007 低压开关装置和控制装置.第8部分:旋转电机的内置热保护(PTC)控制装置

Low-voltage switchgear and controlgear - Part 8 : control units for built-in thermal protection (PTC) for rotating electrical machines.

NF C63-113/A1:2007 低压开关装置和控制装置.第4-3部分:电流接触器和电动机起动器.交流半导体控制装置和非电动机负荷用电流接触器

Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads.

IEC 60947-6-2:2007 低压开关设备和控制设备.第6-2部分:多功能设备.控制和保护开关器件(或设备)(CPS)

This part of IEC 60947 applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfill additional functions, such as isolation. Digital inputs and/or digital outputs contained in CPSs, and intended to be compatible with PLCs are covered by IEC 61131-2.

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

AS/NZS 3199:2007 接受和试验规范.电缆增设装置

Specifies requirements for cord extension sets intended for use at low voltage. It is intended to be read in conjunction with AS/NZS 3100.

Approval and test specification - Cord extension sets

NF C63-112/A2:2007 低压开关装置和控制装置.第4-2部分:接触器和电动机起动器.交流半导体电动机控制器和起动器

Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters.

BS EN 60947-5-8:2006 低压开关设备和控制设备.第5-8部分:控制电路器件和开关元件.三相启动开关

This part of IEC 60947 specifies requirements for three-position enabling switches. These switches are used as components of enabling devices described in 10.9 of IEC 60204-1 to provide signals that, a) when activated, allow machine operation to be initiated by a separate start control, and b) when de-activated, i) initiate a stop function, and ii) prevent initiation of machine operation. NOTE 1 The enabling control function is described in 9.2.6.3 of IEC 60204-1. NOTE 2 This standard does not deal with enabling devices. This standard does not apply to: − three-position enabling switches for non-electrical control circuits, for example hydraulic, pneumatic; − enabling switches without three-position mechanism; − emergency stop devices (see IEC 60947-5-5).

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

ANSI/IEEE 386:2006 大于600V配电系统的可分离绝缘连接器系统

Establishes definitions, service conditions, ratings, interchangeable construction features and tests for loadbreak and deadbreak separable insulated connector systems rated 601 V and above, 600 A or less, for use on power distribution systems.

Separable Insulated Connector Systems for Power Distribution Systems above 600 V

UL 1686-2007 插针和套管配置

These configurations cover attachment plugs, receptacles, and cord connectors, for use in accordance with the National Electrical Code (NEC), ANSI/NFPA 70. These configurations do not cover devices rated at more than 800 A or for more than 600 V.

UL Standard for Safety Pin and Sleeve Configurations Third Edition

NF C63-425:2007 低压开关和控制设备组件.第5部分:公用电网配电组件的特殊要求

Low-voltage switchgear and controlgear assemblies - Part 5 : particular requirements for assemblies for power distribution in public networks.

UL 60947-5-2 BULLETIN-2007 UL安全标准.低压开关装置和控制装置.第5-2部分:控制电路器件和开关元件.接近开关

This part of IEC 60947 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. These proximity switches are self-contained, have semiconductor switching elements(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz a.c. or 300 V d.c. This Standard is not intended to cover proximity switches with analogue outputs. The object of this standard is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. 1.1 DV Addition of 1.1 DV.1 - 1.1 DV.3: 1.1DV.1 This equipment is for use in ordinary locations in accordance with the National Electrical Code, NFPA 70. 1.1DV.2 These requirements cover electronic proximity switches for use on industrial machinery or mass-production industrial equipment as defined by the Electrical Standard for Industrial Machinery, NFPA 79. 1.1DV.3 Equipment intended for use in hazardous locations as defined by the National Electrical Code, NFPA 70 are covered by the Standard for Industrial Control Equipment for Use in Hazardous (Classified) Locations, UL 698. 1.1DV Addition of 1.1DV.4: 1.1DV.4 Equipment requirements are intended for use in an ambient temperature of 0 to 40? C degrees unless specified otherwise

UL Standard for Safety Low-Voltage Switchgear and Controlgear ?Part 5-2: Control circuit devices and switching elements ?Proximity switches

UL 414 BULLETIN-2007 UL安全标准.仪表插座.评议提交截止日期:2007年12月6日

Propose new and revised requirements for the following topics of UL 414: 1. Removal of Outdated Enclosure Requirements; 2. Clarification of Requirements for Live Parts Mounted on the Underside of an Insulating Base; 3. Clarification of Requirements for Metering Transformer Cabinets and Metering Transformer Cabinet Interiors; 4. Editorial Revision of Paragraph 13.19; 5. Clarification of Requirements for Overall Current Rating of a Meter Socket Assembly With More Than One Metering Position; 6. Renumbering Sections 25.11 and 25.12 to Properly Identify Short Circuit Requirements; and 7. Clarification of Marking Requirements.

UL Standard for Safety Meter Sockets COMMENTS DUE: December 6, 2007

GOST R 51321.1-2007 低电压开关设备和控制设备装置.第1部分:对装置作型号试验或者部分型号试验.一般技术要求和试验方法

Low-voltage switchgear and controlgear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods

ANSI/EIA/ECA 364-18B:2007 电连接和插座用视觉和空间检验试验规程

Establishes guidelines for visual and dimensional inspection of electrical connectors and sockets prior to, during, and after other test procedures.

Visual and Dimensional Inspection Test Procedure for Electrical Connectors and Sockets