K35 防爆电器 标准查询与下载

IEC 60079-5:2015 爆炸性环境.第5部分:粉末填充"q"类型的设备防护

Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

BS EN 60079-2:2014 爆炸性环境.第2部分:"p"型压力封装的防护设备

Explosive atmospheres. Equipment protection by pressurized enclosure "p"

BS EN 60079-26:2015 爆炸性气氛 设备防护等级(EPL)Ga

Explosive atmospheres. Equipment with Equipment Protection Level (EPL) Ga

IEC 60079-10-2:2015 爆炸性环境.第10-2部分:区域分类.易燃灰尘环境

Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

GOST IEC 62262-2015 电气设备的抗外部机械冲击外壳的保护性能等级 (IK-规程)

Degrees of protection provided by enclosures against external mechanical impacts (IK code)

BS EN 15207:2014 危险物品运输罐.危险区域中用24V标称电源电压设备用插头/插座连接和电源特性

Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage

DIN EN 60079-31:2014 爆炸性环境.第31部分:"t"型外壳的防尘点火设备防护(IEC 60079-31-2013).德文版本EN 60079-31-2014

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" (IEC 60079-31:2013); German version EN 60079-31:2014

IEC 60079-18:2014 爆炸性环境.第18部分:密封"m"型设备保护

"This part of IEC 60079 gives the specific requirements for the construction@ testing and marking of electrical equipment@ parts of electrical equipment and Ex components with the type of protection encapsulation ""m"" intended for use in explosive gas atmospheres or explosive dust atmospheres. This part applies only for encapsulated electrical equipment@ encapsulated parts of electrical equipment and encapsulated Ex components (hereinafter always referred to as ""m"" equipment) where the rated voltage does not exceed 11 kV. The application of electrical equipment in atmospheres@ which may contain explosive gas as well as combustible dust simultaneously@ may require additional protective measures. This standard does not apply to dusts of explosives@ which do not require atmospheric oxygen for combustion@ or to pyrophoric substances This standard does not take account of any risk due to an emission of flammable or toxic gas from the dust. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0@ the requirement of this standard takes precedence."

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

BS EN 60079-1:2014 爆炸性环境."d"型防火外壳的设备防护

Explosive atmospheres. Equipment protection by flameproof enclosures "d"

JIS C 60079-15 ERRATUM 1:2014 勘误

ERRATUM

DIN EN ISO 4126-6:2014 过压保护安全设备.第6部分:安全隔板的应用、选择和安装(ISO 4126-6-2014);德文版本EN ISO 4126-6-2014

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014); German version EN ISO 4126-6:2014

DIN EN 60079-14:2014 爆炸性环境.第14部分:电气装置设计,选择和安装(IEC 60079-14-2013).德文版本EN 60079-14-2014

Explosive atmospheres - Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013); German version EN 60079-14:2014

DIN EN 60079-17:2014 爆炸性气体环境.第17部分:电气设备检验和维护(IEC 60079-17:2013).德文版本EN 60079-17-2014

Explosive atmospheres - Part 17: Electrical installations inspection and maintenance (IEC 60079-17:2013); German version EN 60079-17:2014

IEC 60079-11:2011/ISH1:2014 易爆环境.第11部分:实质安全性的"i"型防护电气设备.说明表单1

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"; Interpretation sheet 1

IEC 60079-0:2011/ISH2:2014 爆炸性气体环境.第0部分:设备.通用要求.说明表单2

Explosive atmospheres - Part 0: - Equipment - General requirements; Interpretation sheet 2

DIN EN 60079-28 Bb.1:2014 爆炸性气体环境. 第28部分: 采用光辐射的设备和传输系统的保护; 补充件1. 解释活页1(IEC 60079-28-2006/ISH1-2014)

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation; Supplement 1: Interpretation Sheet 1 (IEC 60079-28:2006/ISH1:2014)

BS EN 60079-31:2014 爆燃性环境.利用附件"t"的器材灰尘点燃防护

Explosive atmospheres. Equipment dust ignition protection by enclosure "t"

IEC 60079-2:2014 爆燃性环境.第2部分:受压外壳"p"型的设备保护

"This part of IEC 60079 contains the specific requirements for the construction and testing of electrical equipment with pressurized enclosures@ of type of protection ""p""@ intended for use in explosive gas atmospheres or explosive dust atmospheres. It also includes the requirements for pressurized enclosures containing a limited release of a flammable substance. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0@ the requirements of this standard take precedence. This standard does not include the requirements for: pressurized enclosures where the containment system may release a) air with an oxygen content greater than normal@ or b) oxygen in combination with inert gas where the oxygen is in a proportion greater than 21 %. pressurized rooms or analyser houses; see IEC 60079-13; pressurized enclosures used where ""explosives"" or pyrotechnics are present; pressurized enclosures used where hybrid mixtures of gas/vapour and combustible dust are present; pressurized enclosures used where pyrophoric substances such as explosives or propellants containing their own oxidizers are present pressurized enclosures with an internal source of release of combustible dust. NOTE When the user acts in the role of the manufacturer@ it is typically the user's responsibility to ensure that all relevant parts of this standard are applied to the manufacturing and testing of the equipment."

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

BS EN 60079-29-3:2014 爆炸性气体环境. 气体探测器. 固定气体探测系统的功能安全性指南

Explosive atmospheres. Gas detectors. Guidance on functional safety of fixed gas detection systems

IEC 60079-1:2014 易爆环境.第1部分:用隔爆外壳"d"的设备保护

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"