K45 继电保护及自动装置 标准查询与下载

KS C IEC 60834-2:2004 电力系统遥护设备的性能和试验.第2部分:模拟比较系统

이 규격은 상 또는 상 및 진폭처럼 1차 양에 관한 아날로그 정보를 전달한 협대역 및

Performance and testing of teleprotection equipment of power systems-Part 2:Analogue comparison systems

KS C IEC 60481:2004 电力线载波系统的结合设备

이 규격은 전력선 캐리어(PLC) 시스템의 결합 장치(또는 재전송의 경우에는 직접 또는

Coupling devices for power line carrier systems

KS C IEC 60834-1:2004 电力系统遥护设备.性能和试验.第1部分:指令系统

이 규격은 일반적으로 보호 장치에 접속된 전달 명령 정보에 사용된 원격 보호 명령 시스

Performance and testing of teleprotection equipment of power systems-Part 1:Command systems

JB/T 6524-2004 电力系统继电器、保护及自动化装置电气简图用图形符号

本标准规定了电力系统继电器、保护及自动化装置电气简图用图形符号的形式、绘制要求、编号方法及使用规则等内容。 本标准适用于电力系统继电器、保护及自动化装置各类电气简图的绘制。

Graphical symbols in electrical diagrams for relays, protection and automation equipment of power system

JB/T 2626-2004 电力系统继电器、保护及自动化装置常用电气技术的文字符号

本标准规定了用于标注电力系统继电器、保护及子动画状指产品图阳极便指技术文件时常用的文字符号（以下简称文字符号）。 本标准适用于电力系统继电器、保护及字东话桩支产品的电七支土和技术文件编制，以表明电气设备、装置和元器件的名称、功能、状态或特征。 本标准不适用于电气产品的型号编制与命名。

General letter symbols in electrotechnology for relays, protection and automation equipment of power system

DL/Z 886-2004 750kV电力系统继电保护

Specification of protection for 750kV power system

YB/T 4122-2004 微机继电保护运行技术管理规程

本标准规定了微机继电保护的职责分工、装置的性能要求、运行维护管理、检修管理、技术管理，对设计、施工的要求及防范事故措施。 　　本标准适用于冶金行业3kV及以上电压等级电力设备和线路的微机继电保护。

Management code of the operation and technology for the microprocessor-based relaying protection

DL/T 871-2004 电力系统继电保护产品动模试验

The dynamic test of the power system protective products

DL/T 872-2004 小接地电流系统单相接地保护装置

本标准规定了小接地电流系统单相接地保护装置 (以下简称装宣〉 的技术要求、 试验方法、 检验 规则及对标志、 包装、 运输、 贮存的要求。 本标准适用于 3kV~66kV 小接地电流系统单相接地保护装宣以及含有单相接地保护或选线功能的 设备的设计、 制造、 检验和应用.

Specification of single phase earthed relay in non-effective earthed power system

DL/T 873-2004 微机型发电机变压器组动态记录装置技术条件

本标准规定了微机型发电机变压器组动态记录装置 (以下简称装置) 的基本技术要求、技术参数、 试验方法及检验规则等。 本标准适用于火电厂、水电厂、核电厂所用的微机型发电机的动态记录装置及发电机变压器组的 动态记录装置，并作为装置的设计、制造、试验和使用的依据。

Specification of microprocessor-based generator-transformer unit dynamic recorder

BS DD CLC/TS 61496-2:2003 机械安全.电感防护设备.使用有源光电防护器件的设备的特殊要求

This clause of part 1 is replaced by the following: This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices (AOPDs) for the sensing function. Special attention is directed to features that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in annex A of part 1. This part does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. Excluded from this part are AOPDs employing radiation at wavelengths outside the range 400 nm to 1 500 nm. This part may be relevant to applications other than those for the protection of persons, for example the protection of machinery or products from mechanical damage. In those applications additional requirements may be necessary, for example when the materials that are to be recognized by the sensing function have different properties from those of persons. This part does not deal with EMC emission requirements.

Safety of machinery - Electro-sensitive protective equipment - Particular requirements for equipment using active opto-electronic protective devices (AOPD)

DD CLC/TS 61496-2-2003 机械安全 电敏防护设备 第2部分：使用有源光电保护装置（AOPD）的设备的特殊要求

This clause of part 1 is replaced by the following: This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices (AOPDs) for the sensing function. Special attention is directed to features that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in annex A of part 1. This part does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. Excluded from this part are AOPDs employing radiation at wavelengths outside the range 400 nm to 1 500 nm. This part may be relevant to applications other than those for the protection of persons, for example the protection of machinery or products from mechanical damage. In those applications additional requirements may be necessary, for example when the materials that are to be recognized by the sensing function have different properties from those of persons. This part does not deal with EMC emission requirements.

Safety of machinery - Electro-sensitive protective equipment - Part 2:Particular requirements for equipment using active opto-electronic protective devices (AOPD)

KS C IEC 60143-2:2003 电力系统用串联电容器.第2部分:串联电容组用保护设备

이 규격은 매상당 10 Mvar 이상의 직렬 커패시터 뱅크에 대한 보호 장치에 적용한다

Series capacitors for power systems－Part 2：Protective equipment for series capacitor banks

KS C IEC 60143-1:2003 电力系统用串联电容器.第1部分:总则

이 규격은 교류 송전선, 배전선 또는 15~60 Hz의 주파수를 갖는 교류 전력 계통의

Series capacitors for power systems－Part 1：General－Performance, testing and rating－Safety requirements－Guide for installation

KS C IEC 60143-3:2003 电力系统用串联电容器.第3部分:内熔丝

이 규격은 커패시터로 구성된 커패시터 뱅크에 설계된 내부 퓨즈에 관련하며 이 퓨즈는 커

Series capacitors for power systems-Part 3:Internal fuses

IEEE Std C37.04a-2003 基于平衡电流的交流高压断路器的额定结构.修改件1:电容电流开关

This amendment specifies the capacitance current switching portion of the rating structure for all ac circuit breakers rated above 1000 V, including both outdoor and indoor types having preferred ratings listed in ANSI C37.06-2000. The rating structure establishes the basis for all assigned capacitance current ratings including overhead line switching, cable switching, capacitor bank switching, and back-to-back capacitor bank switching.

Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching

ANSI/IEEE C62.21:2003 1000 V及以上的交流旋转电机上浪涌电压保护设备的应用指南(包括IEEE C62.21/Cor1-2008)

Part 1 covers the insulation surge withstand strength of motors and generators with windings having form-wound multi-turn coils and the application of surge protection to form-wound multi-turn coils. Part 2 covers application of surge protection to generators with form-wound multi-turn coils, plus insulation surge withstand strength and surge protection of single-turn coil generators and motors

Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater (including IEEE C62.21/Cor1-2008)

DL/T 823-2002 微机型反时限电流保护通用技术条件

本标准规定了反时限电流保护的技术要求、试验方法、检验规则、包装和运输等。 本标准适用于发电机、电动机、电网等需要反时限过流、过负荷的继电保护装置，作为这类产品研 制、生产、设计、运行和检验的依据。

General Specification for Microprocessor-based Inverse Time Overcurrent Protection Equipment

DL/T 524-2002 继点保护专用电力线载波收发信机技术条件

本标准规定了继电保护专用电力线载波收发信机的型式、额定参数、技术要求、试验方法及檢驗規 则等。 本标准适用于 110kV 及以上中性点直接接地系统的继电保护专用电力线载波收发信机，可作为这 类产品研制、生产、检验和验收的依据。

Specification for power line carrier transceiver dedicated to protection

JB/T 3779-2002 快速中间继电器

本标准规定了快速中间继电器的产品分类、技术要求、试验方法、检验规则、标志、使用说明书及包装、运输和贮存等内容。 本标准适用于电力系统二次回路中用的快速中间继电器。此种继电器在电力系统二次回路中作为辅助继电器用，以增加前一级继电器的融点对数，融点容量或转换电路，适合用作跳闸继电器。 本标准仅适用于新的继电器。

High speed auxiliary relay