K48 绝缘子 标准查询与下载

KS C 3809-2001 6600v悬式绝缘子

이 규격은 주로 고압 가공 전선로에 사용되는 자기제의 고압 핀 애자(이하 애자라 한다)에

6 600 V pin type insulators

SANS 60168:2001 标称电压超过1000V的系统用室内和室外陶瓷或玻璃柱状绝缘子试验

Is applicable to post insulators and post insulator units of ceramic material or glass, for indoor and outdoor use in electrical installations or equipment, operating on alternating current with a nominal voltage greater than 1 000 V and a frequency not

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V

DL 784-2001 带电更换330kV线路耐张单片绝缘子技术规程

The technical code for transposing strain insulator on 330kV energized transmission line

NF C52-378-2*NF EN 61378-2:2001 转换变压器.第2部分:高压直流转换器(HVDC)用变压器

Convertor transformers - Part 2 : transformers for HVDC applications.

NF C66-030/A2*NF EN 60168/A2:2001 公称电压大于 1 kV 的系统用室内和室外瓷料或玻璃支柱绝缘子的试验

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV.

JB/T 10305-2001 3.6kV~40.5kV高压设备用户内有机材料支柱绝缘子技术条件

　　本标准规定了有机材料支柱绝缘子的适用范围、定义、使用条件、技术要求、检验规则和试验方法、接收准则及包装、标志和贮存等方面的通用要求。 　　本标准适用于额定电压3.6kV至40.5kV、频率不大于100Hz的交流电气装置或设备上使用于大气条件下的户内有机材料支柱绝缘子。本标准不包括复合绝缘子。

Technical specification on indoor post insulators of organic material for 3.6kV up to 40.5kV high-voltage equipment

DIN EN 60383-1 Berichtigung 1:2001 DIN EN 60383-1-1997(VDE 0446 Teil 1)的技术勘误

Corrigenda to DIN EN 60383-1 (VDE 0446 Teil 1):1997-05; German version EN 60383-1:1996/A11:1999

SANS 60660:1999 绝缘子．标称电压在1KV至300KV（不含）的系统用有机材料户内支柱绝缘子的试验

Applicable to post insulators of organic material for indoor service in electrical installations or equipment operating in air at atmospheric pressure on alternating current with a nominal voltage greater than 1 000 V up to, but not including, 300 kV, as

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

IEC 60168:2001 标称电压大于1000V的系统用陶瓷材料或玻璃的户内和户外柱式绝缘子试验

This International Standard IEC 60168 is applicable to post insulators and post insulator units of ceramic material or glass, for indoor and outdoor use in electrical installations or equipment, operating on alternating current with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This standard may be regarded as a provisional standard for post insulators for use on d.c. systems. IEC 60438 gives general guidance for those insulators. This standard does not apply to composite insulators, or to those indoor post insulators in organic material which are covered by another IEC standard [1]. The object of this standard is to define: - the terms used; - the electrical and mechanical characteristics of post insulators; - the conditions under which the specified values of these characteristics are verified; - the methods of test; - the acceptance criteria. Numerical values of characteristics of post insulators are specified in IEC 60273. This standard does not include requirements dealing with the choice of post insulators for specific operating conditions. NOTE 1 A guide for the choice of insulators under polluted conditions is available, see [2]. NOTE 2 This standard does not include radio interference tests or artificial pollution tests. These subjects and relevant test methods are dealt with in other IEC publications, see [3], [4] and [5]. NOTE 3 When this standard is applied to hollow post insulators, other IEC publications should also be taken into account, see [6] and [7]. note: * The figures in square brackets refer to annex C (Bibliography).

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEEE 987-2001 复合绝缘子的应用指南

A guide to the application of composite insulators to overhead transmission and distribution lines is provided. It is based on utility field experience, results of research laboratory tests, and manufacturers recommendations. The guide deals with composite insulators, which include a core, weathersheds, and metal end fittings. The core consists of resin and axially-aligned glass fibres. The weathersheds are of polymeric materials.

Guide for Application of Composite Insulators

DIN EN 60660:2000 绝缘子.标称电压在1KV至300KV(不含)的系统用有机材料户内支柱绝缘子的试验

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999); German version EN 60660:1999

DL/T 729-2000 户内绝缘子运行条件.电气部分

On-line condition of indoor insulators.Electrical part

DL/T 487-2000 330kV及500kV交流架空送电线路绝缘子串的分布电压

The distribution voltage along insulator string on A.C.overhead transmission line with rated voltage of 330kV and 500kV

JIS C 4901:2000 低压电力电容器

この規格は，力率改善の目的で。商用周波数の交流600V以下の回路に負荷と並列に接続して，屋内で使用する進相用の蒸着電極ゴンデンサ(以下,ゴンデンサという。)について規定する。

Low-voltage power capacitors

BS EN 60660:2000 绝缘体 标称电压大于 1kV 至但不包括 300kV 系统的有机材料室内支柱绝缘子测试

To define the electrical and mechanical characteristics and to prescribe methods of testing and acceptance criteria.

Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV

JB/T 56197-1999 高压瓷套 产品质量分等

High-voltage porcelain bushing product quality grading

SANS 60614-2-4:1985 电气安装用导管规范．第2部分：导管特殊规范．第4节：绝缘材料柔韧自复性导管

Specifies requirements for pliable self-recovering plain and corrugated conduits of insulating materials.

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 4: Pliable self-recovering conduits of insulating materials

SANS 60614-2-3:1990 电气安装用导管规范．第2部分：导管特殊规范．第3节：绝缘材料柔韧导管

Specifies requirements for pliable non-flame propagating plain and corrugated conduits of insulating material. Also applies to corrugated conduits with a smooth exterior surface.

Specification for conduits for electrical installations Part 2: Particular specifications for conduits Section 3: Pliable conduits of insulating material

KS C 3836-1999 配电用球形支座悬式绝缘子

이 규격은 가공 배전 선로에 사용하는 볼 소켓형 자기제 현수 애자에 대하여 규정한다.

Ball and socket type suspension insulator

IEC 60660:1999 标称电压1000V至300kV(不含)系统用有机材料户内支柱绝缘子的试验

This International Standard is applicable to post insulators of organic material for indoor service in electrical installations or equipment operating in air at atmospheric pressure on alternating current with a nominal voltage greater than 1000 V up to, but not including, 300 kV, as defined by range I of IEC 60071-1, and a frequency not greater than 100 Hz. Composite insulators are not covered by this standard. The object of this standard is - to define the terms used; - to define electrical and mechanical characteristics of post insulators of organic material and to prescribe the conditions under which the specified values of these characteristics are verified; - to prescribe methods of testing; - to prescribe acceptance criteria. This standard does not give numerical values for insulator characteristics; nor does it deal with a choice of insulators for specific operating conditions. IEC 60273 specifies numerical values for electrical and mechanical characteristics and gives the dimensions necessary for inter-changeability of post insulators.

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1000 V up to but not including 300 kV