K48 绝缘子 标准查询与下载

SANS 60305:1995 标称电压超过1000V的架空线路用绝缘子．交流系统用陶瓷或玻璃绝缘子装置．盖式和插脚式绝缘子装置的特征

Applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass, intended for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. Also applies to insulators

Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type

DIN EN 60305:1996 额定电压1kV以上架空线绝缘子.交流系统陶瓷或玻璃绝缘子.盘形悬式绝缘子特性

Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 60305:1995); German version EN 60305:1996

JB/T 8460-1996 高压线路用棒形悬式复合绝缘子尺寸与特性

本标准规定丁高压线路甩棒形悬式复合绝缘子的强度等级，型式尺寸，连接结构尺寸和主要特性。 本标准适用于普通和污秽地区的交流电力系统额定电压35～500kV，频率不超过100Hz的架空线路、变电站悬垂和耐张用棒形悬式复合绝缘子。绝缘子安装地点环境温度应在-40～+40℃之间，海拔不超过1000m。 注：海拔超过1000m时，按相应标准规定的修正办法判定其适用性，高海拔地区的污秽问题正在考虑中。

Rod suspension compound insulators for high-tension lines. Dimensions and property

BS EN 60305:1996 标称电压1000V以上架空线绝缘子.交流系统用陶瓷或玻璃绝缘子.盘形和针形悬式绝缘子组特性

Specifies values for mechanical characteristics and main dimensions of insulator units intended for use on overhead lines (or substations) in clean and polluted areas. Electrical characteristics are not included.

Insulators for overhead lines with a nominal voltage above 1 kV. Ceramic or glass insulator units for a.c. systems. Characteristics of insulator units of the cap and pin type

CSA C83-96-1996 通信与电力线硬件.第3版.通用指令第1号

Communication and Power Line Hardware Third Edition; General Instruction No 1

Communication and Power Line Hardware Third Edition; General Instruction No 1

NF C66-550:1996 交流电压大于 1 kV 的绝缘套管

Insulated bushings for alternating voltages above 1 kv.

DIN EN 61325:1996 额定电压1000V以上架空线绝缘子.直流系统陶瓷或玻璃绝缘子.定义、试验方法和验收准则

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995

ANSI C29.7-1996 湿法瓷绝缘子.高压线路柱式

Covers materials, dimensions, physical characteristics, and testing information for high-voltage line-post type insulators made of wet process porcelain and used in the transmission and distribution of energy

Wet-Process - Porcelain Insulators - High-Voltage Line-Post Type

ANSI C29.6-1996 湿法磁绝缘子.高压针型

Covers materials, dimensions, physical characteristics, and testing information for high voltage pin insulators made of wet process porcelain and used in the transmission and distribution of energy

Wet-Process Porcelain Insulators - High-Voltage Pin Type

IEC 60305:1995 标称电压1000V以上架空线路用绝缘子 交流系统用陶瓷或玻璃绝缘子单元 盘形悬式绝缘子单元的特性

Applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass, intended for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz.

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type

JB/T 7844-1995 气压瓷套通用技术条件

本标准规定了气压瓷套的技术要求，试验方法，检验规则，包装和标志。 本标准适用于额定电压高于1000V、周周空气温度为-40～+40℃的断路器等电力设备用的瓷套，其内腔持久气压大于正常大气压力。瓷套内腔气体可以是干燥空气，惰性气体，如六氟化硫(SF|(6))、氮(N|(2))，或其混合物。 瓷套是电力设备的绝缘元件，电力设备的外绝缘电气性能不是瓷套本身的特性，故不在本标准中规定。 本标准不适用于在足以降低瓷套性能的条件下使用的瓷套。

General technical specifications for air pressure ceramic sleeves

BS EN 60383-2:1995 标称电压高于1000V的架空线路用绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.定义、试验方法和验收标准

This part of IEC 383 applies to insulator strings and insulator sets comprising string insulator units of ceramic material or glass for use on a.c. overhead power lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. This part of IEC 383 also applies to insulator strings and insulator sets for use on d.c. overhead electric traction lines. This part of IEC 383 also applies to insulator strings and insulator sets of similar design when used in substations. It may be regarded as a provisional standard for insulator strings and insulator sets for use on d.c. overhead power lines and for composite insulator sets. The object of this part of IEC 383 is to prescribe standard electrical test procedures and acceptance criteria to verify the defined characteristics of insulator strings and insulator sets falling within the scope of the part of IEC 383. These tests and characteristics are intended to give a common base to designers, users and suppliers of overhead lines, insulators and line equipment when definition, evaluation or verification of the electrical characteristics of such equipment is required. These tests are not intended to be mandatory tests on insulators whether supplied indi-vidually or as strings or as sets. NOTES 1 Tests on string insulator units are dealt with in IEC 383-1. Tests on composite insulators are dealt with in IEC 1109. 2 This part does not include artificial pollution or radio-interference tests. These subjects and relevant test methods are dealt with in the following IEC reports: IEC 437: Report - radio interference test on high-voltage insulators. IEC 507: Report - artificial pollution tests on high-voltage insulators to be used on a.c. systems. 3 Power arc tests are currently under study.

Insulators for overhead lines with a nominal voltage above 1000 V. Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

DIN EN 60383-2:1995 公称电压高于1000V的架空线路绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.试验方法和验收准则

Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-2:1993); German version EN 60383-2:1995

BS EN 60168:1995 标称电压大于 1000V 系统的室内外陶瓷材料或玻璃支柱绝缘子测试

This standard applies only to a.c. applications and not to composite and/or organic material insulators.

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V

DL/T 562-1995 高海拔污秽地区悬式绝缘子串片数选用导则

Guiding principle for selecting numbers of suspension insulator strings in areas with high elevation and pollution

IEEE 957-1995 绝缘子清洁处理指南

Documents the procedures used for cleaning contaminated electrical insulators (excluding nuclear, toxic and hazardous chemical contaminants) using varied equipment and techniques.

Guide for cleaning insulators

SANS 60372:1984 绝缘子串单元球窝连接的锁紧装置．尺寸和试验

Applicable to locking devices used with ball and socket couplings of string insulator units and used with the corresponding metal fittings standardized in IEC 60120. Defines the shapes and some standard dimensions for locking devices and also the test me

Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

JIS C 3844:1995 低压针式绝缘子

この規格は，磁器製の低圧ビンがいし（以下,がいしという。）について規定する。

Low-voltage pin type insulators

JIS C 3845:1995 低压有钩环的绝缘子

この規格は，磁器製の低圧引留がいし(以下,がいしという。)について規定する。

Low-voltage shackle type insulators

JIS C 3703:1995 绝缘子金属配件

Metal fittings for insulators