K48 绝缘子 标准查询与下载

JB/T 6746.2-1993 电除尘器用瓷绝缘子.瓷转轴

本标准规定了电除尘器用瓷转轴的型式尺寸、技术要求、试验方法、检验规则以及标志和包装等。 本标准适用于直流额定电压为72、80、90、100kV，工作温度为正值150、250℃，安装地点海拔不超过1000m。 本标准不适用于在足以降低瓷转轴性能和使瓷转轴表面产生凝露的工作环境下使用的绝缘子。

Porcelain insulators for electric precipitation Ceramic rotating shafts

JB/T 6747-1993 直流系统用高压绝缘子人工污秽试验方法.固体层法

本标准规定了直流系统用瓷和玻璃高压统缘子的人工污秽试验方法 固体层法。 本标准适用于直流系统电压为±1~500kV、户外污秽环境下用的绝缘子的污秽耐受特性试验。 本标准适用于直流架空线路、牵引线路和变电所绝缘子。它也适用于套管，但不应损伤其内绝缘。 本标准不直接行之有效用于复合绝缘子和其它特殊类型的绝缘子（半导电釉绝缘子或涂覆有机格料的绝缘子）。 注：本标准适用于试验地点海拔高度不超过100m的直流人工污秽试验。

Artificial pollution test method for high tension insulators intended to be used in DC system Solid layer method

DIN IEC 60273:1993 额定电压1000V以上系统户内、户外支柱绝缘子的特性

Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V (IEC 60273:1990); German version HD 578 S1:1992

JIS C 3801:1993 绝缘子试验方法

Testing method for insulators

JIS C 3711:1993 电车用绝缘架空线系统

この規格は，主として工場，倉庫などの事業場に設置されるクレーンなどの移動用機器に電気を供給する交流600V以下.直流750V以下の電路に使用する定格電流2000A以下の絶縁トロリー線及びその附属品で構成する絶縁トロリー装置について規定する。なお，多線式絶縁トロリー装置は，屋内用だけに適用する。備考I.ここでいう附属品とは，フィードイン，ジョインタ，エンド，ハンガ，耐張引留装置及びコレクタをいう。2.この規格の引用規格を，付表1に示す。3.この規格の中で{ }を付けて示してある単位及び数値は，従来単位によるものであって参考として併記したものである。

Covered trolley wire systems

SANS 60120:1984 绝缘子串装置的球窝联接器的尺寸

Applies to string insulator units of the cap and pin and long rod types and their associated metal fittings.

Dimensions of ball and socket couplings of string insulator units

SANS 60471:1977 绝缘子串单元槽型连接的尺寸

Applies to string insulator units of the cap and pin type and also of the long rod type as well as the fittings used with such insulators.

Dimensions of clevis and tongue couplings of string insulator units

SANS 60720:1981 线路柱形绝缘子的特性

Applies to line post insulators with insulating parts of ceramic material intended for a.c. overhead lines with a nominal voltage higher than 1 000 V and a frequency not higher than 100 Hz.

Characteristics of line post insulators

SANS 60273:1990 标称电压超过1000V的系统用室内和室外柱状绝缘子的特性

Applies to post insulators and post insulator units of ceramic material or glass intended for indoor or outdoor service, and to post insulators of organic material intended for indoor service in electrical installations or equipment operating on alternat

Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V

JIS C 4901:1993 低压电力电容器

Low-voltage power capacitors

IEC 60383-2:1993 标称电压1000V以上的架空线路用绝缘子 第2部分:交流系统用绝缘子串和绝缘子组 定义、试验方法和验收准则

Applies to insulator strings and insulator sets comprising string units of ceramic material or glass for use with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. Also applies to insulator strings and insulator sets for use

Insulators for overhead lines with a nominal voltage above 1000 V; part 2: insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria

IEC 60383-1:1993 标称电压1000V以上的架空线路用绝缘子 第1部分:交流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则

Applies to insulators on a.c. power lines and overhead traction lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. Applies to string insulator units, rigid overhead line insulators and to insulators of similar desig

Insulators for overhead lines with nominal voltage above 1000 V; part 1: ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria

BS 3297-2:1993 标称电压大于 1000 V 系统的室内和室外支柱绝缘子的特性

This standard applies to post insulators and post insulator units of ceramic material or glass intended for indoor or outdoor service, and to post insulators of organic material intended for indoor service in electrical installations or equipment operating on alternating current systems with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It may also be regarded as a provisional standard for insulators for use on direct current systems. The insulators covered by this standard are primarily intended for use in isolators (disconnectors) or as bus-bar or fuse supports. This standard covers five types of post insulators: a) indoor post insulators of ceramic material or glass and with internal metal fittings; b) indoor post insulators of organic material and with internal metal fittings; c) outdoor cylindrical post insulators of ceramic material or glass and with internal metal fittings; d) outdoor cylindrical post insulators of ceramic material or glass and with external metal fittings; e) outdoor pedestal post insulators of ceramic material or glass. The term "cylindrical insulators" is intended to cover insulators of the truncated conical form also. The five types of insulators are distinguished by their electrical, mechanical and dimensional characteristics. Figures 1, 2, 3, 4 and 5 illustrate typical examples of each type of insulator. These drawings are only general illustrations and other shapes and constructions are permitted.

Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V

JIS C 3824:1992 高压瓷管

この規格は，主として建築物の電線が貫通する箇所に用いる磁器製の高圧がい管（以下,がい管という。）について規定する。

High-voltage porcelain tubes

JIS C 3821:1992 6600 V 针式绝缘子

この規格は，主として高圧架空電線路に用いる磁気製の高圧ピンがし（以下,がいしという。）について規定する。

6600 V pin type insulators

JIS C 3810:1992 悬式绝缘子及耐盐污悬式绝缘子

Normal type and anti-pollution type suspension insulators

JIS E 2301:1992 架空电线用绝缘子

この規格は，電車線路に使用する磁器製懸垂がいし及び支持がいし(以下，がいしという。)について規定する。

Insulator for electric overhead line

JIS C 2141:1992 电气和电子装置用陶磁绝缘子的试验方法

この規格は，電気機器及び電子機器に使用するセラミック絶縁材料(以下,セラミックスという。)の試験方法について規定する。

Testing methods of ceramic insulators for electrical and electronic applications

JIS C 2105:1992 电绝缘无溶剂液体树脂的试验方法

Testing methods of solventless liquid resins for electrical insulation

prEN 60507-1992 交流系统使用的高压绝缘子的人工污染试验(IEC 507-91)

Artificial pollution tests on high-voltage insulators to be used on a.c. systems (IEC 507:1991)