K49 避雷器 标准查询与下载

DIN EN 62305-1 Berichtigung 1:2007 雷电防护.第1部分:一般原则.DIN EN 62305-1 (VDE 0185-305-1)-2006技术勘误

Protection against lightning - Part 1: General principles (IEC 62305-1:2006); German version EN 62305-1:2006, Corrigenda to DIN EN 62305-1 (VDE 0185-305-1):2006-10; German version CENELEC-Cor.:2006 to EN 62305-1:2006

DIN EN 62305-2 Berichtigung 1:2007 雷电防护.第2部分:风险管理.DIN EN 62305-2 (VDE 0185-305-2)-2006技术勘误

Protection against lightning - Part 2: Risk management (IEC 62305-2:2006); German version EN 62305-2:2006, Corrigenda to DIN EN 62305-2 (VDE 0185-305-2):2006-10; German version CENELEC-Cor.:2006 to EN 62305-2:2006

DIN EN 62305-4 Berichtigung 1:2007 雷电防护.第4部分:建筑物内电气和电子系统.DIN EN 62305-4 (VDE 0185-305-4)-2006技术勘误

Protection against lightning - Part 4: Electrical and electronic systems within structures (IEC 62305-4:2006); German version EN 62305-4:2006, Corrigenda to DIN EN 62305-4 (VDE 0185-305-4):2006-10; German version CENELEC-Cor.:2006 to EN 62305-4:2006

DIN EN 62305-3 Berichtigung 1:2007 雷电防护.第3部分:建筑物物理损坏和生命危险.DIN EN 62305-3 (VDE 0185-305-3)-2006技术勘误

Protection against lightning - Part 3: Physical damage to structures and life hazard (IEC 62305-3:2006, modified); German version EN 62305-3:2006, Corrigenda to DIN EN 62305-3 (VDE 0185-305-3):2006-10; German version CENELEC-Cor.:2006 to EN 62305-3:2006

DIN EN 60099-4:2007 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器.(IEC 60099-4-2004的修改件+A1-2006)

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4:2004, modified + A1:2006); German version EN 60099-4:2004 + A1:2006

AS/NZS 1768:2007 防雷法

Provides guidelines for the protection of persons and property from the hazards of lightning. Applies to conventional lightning protection systems consisting of air terminations, downconductors, earthing systems and surge protective devices. Also provides a comprehensive risk management process for the determination of the risk of damage due to lightning for a range of structures.

Lightning protection

JB/T 8459-2006 避雷器产品型号编制方法

本标准规定了避雷器及其派生产品、附属产品的型号编 制方法。 本标准适用于交流系统和直流系统避雷器、特殊用途避雷器及避雷器的派生产品、附属产品等产品的型号编制。

Designation for surge arrester products

NF C17-151-3:2006 雷电防护部件(LPC).第3部分:绝缘火花间隙的要求

Lightning Protection Components (LPC) - Part 3 : requirements for isolating spark gaps.

NF C17-151-2/A1:2006 雷电防护部件(LPC).第2部分:导线和接地电极的要求

Lightning protection components (LPC) - Part 2 : requirements for conductors and earth electrodes.

NF C17-100-4:2006 雷电防护.第4部分:建筑物内部的电气和电子系统

Protection against lightning - Part 4 : electrical and electronic systems within structures.

NF C17-100-3:2006 雷电防护.第3部分:对建筑物的物理损害和生命危害

Protection against lightning - Part 3 : physical damage to structures and life hazard.

NF C17-151/A1:2006 雷电防护部件(LPC).第1部分:连接部件要求

Lightning Protection Components (LPC) - Part 1 : requirements for connection components.

NF C65-101/A1:2006 电涌放电器.第4部分:交流电系统用无火花隙的金属氧化物电涌放电器

Surge arresters - Part 4 : metal-oxide surge arresters without gaps for a.c. systems.

BS EN 50164-3:2006 雷电防护元件(LPC).绝缘触发管的要求

This European Standard specifies the requirements and tests for isolating spark gaps (ISG) for lightning protection systems. ISG’s can be used to indirectly bond a lightning protection system to other nearby metalwork where a direct bond is not permissible for functional reasons. Typical applications include the connection to - earth termination systems of power installations, - earth termination systems of telecommunication systems, - auxiliary earth electrodes of voltage operated earth fault circuit breakers, - rail earth electrode of AC and DC railways, - measuring earth electrodes for laboratories, - installations with cathodic protection and stray current systems, - service entry masts for low- voltage overhead cables, - bypassing insulated flanges and insulated couplings of pipelines. NOTE ISG?s may also be suitable for use in hazardous conditions such as fire and explosive atmosphere. Due regard should be taken of the extra requirements necessary for the components to be installed in such conditions. This does not cover applications where follow currents occur. Protective devices according to EN 50122-1 and EN 50123-5 are not part of this European Standard.

Lightning protection components (LPC) - Requirements for isolating spark gaps

BS EN 50164-3:2006+A1:2009 雷电防护元件(LPC).绝缘火花隙的要求

This European Standard specifies the requirements and tests for isolating spark gaps (ISG) for lightning protection systems. ISG’s can be used to indirectly bond a lightning protection system to other nearby metalwork where a direct bond is not permissible for functional reasons. Typical applications include the connection to - earth termination systems of power installations, - earth termination systems of telecommunication systems, - rail earth electrode of AC and DC railways, - measuring earth electrodes for laboratories, - installations with cathodic protection and stray current systems, - service entry masts for low- voltage overhead cables, - bypassing insulated flanges and insulated couplings of pipelines. NOTE ISG?s may also be suitable for use in hazardous conditions such as fire and explosive atmosphere. Due regard should be taken of the extra requirements necessary for the components to be installed in such conditions. This does not cover applications where follow currents occur. Protective devices according to EN 50122-1 and EN 50123-5 are not part of this European Standard.

Lightning protection components (LPC) - Requirements for isolating spark gaps

BS EN 62305-2:2006 避雷装置.风险管理

This part of IEC 62305 is applicable to risk assessment for a structure or for a service due to lightning flashes to earth. Its purpose is to provide a procedure for the evaluation of such a risk. Once an upper tolerable limit for the risk has been selected, this procedure allows the selection of appropriate protection measures to be adopted to reduce the risk to or below the tolerable limit.

Protection against lightning — Part 2: Risk management

BS EN 62305-3:2006 避雷装置.对建筑物的物理损伤和寿命危害

This part of IEC 62305 provides the requirements for protection of a structure against physical damage by means of a lightning protection system (LPS), and for protection against injury to living beings due to touch and step voltages in the vicinity of an LPS (see IEC 62305-1). This standard is applicable to: a) design, installation, inspection and maintenance of an LPS for structures without limitation of their height; b) establishment of measures for protection against injury to living beings due to touch and step voltages. NOTE 1 Specific requirements for an LPS in structures dangerous to their surroundings due to the risk of explosion are under consideration. Additional information is provided in Annex D for use in the interim. NOTE 2 This part of IEC 62305 is not intended to provide protection against failures of electrical and electronic systems due to overvoltages. Specific requirements for such cases are provided in IEC 62305-4.

Protection against lightning — Part 3: Physical damage to structures and life hazard

BS EN 62305-4:2006 避雷装置.建筑物中的电气和电子系统

This part of IEC 62305 provides information for the design, installation, inspection, maintenance and testing of a LEMP protection measures system (LPMS) for electrical and electronic systems within a structure, able to reduce the risk of permanent failures due to lightning electromagnetic impulse. This standard does not cover protection against electromagnetic interference due to lightning, which may cause malfunctioning of electronic systems. However, the information reported in Annex A can also be used to evaluate such disturbances. Protection measures against electromagnetic interference are covered in IEC 60364-4-44 and in the IEC 61000 series [1]1. This standard provides guidelines for cooperation between the designer of the electrical and electronic system, and the designer of the protection measures, in an attempt to achieve optimum protection effectiveness. This standard does not deal with detailed design of the electrical and electronic systems themselves.

Protection against lightning — Part 4: Electrical and electronic systems within structures

JB/T 10609-2006 交流三相组合式有串联间隙金属氧化物避雷器

本标准规定了额定电压42kV及以下瓷外套和复合外套三相组合式有串联间隙金属氧化物避雷器（以下简称避雷器、瓷外套避雷器和复合外套避雷器）的技术要求、试验方法、检验规则等内容。 本标准适用于35kV及以下交流非有效接地系统，主要用于限制相-相和相-地大气过电压和部分操作过电压的避雷器。

Combination type metal-oxide surge arresters with series gaps for the three-phase a.c. systems

NF C17-100-1:2006 防雷电保护结构.第1部分:避雷针的安装

Protection against lightning - Part 1 : general principles.