K54 汽轮机及其辅助设备 标准查询与下载

JB/T 9637-1999 汽轮机 总装技术条件

　　本标准规定了汽轮机总装技术条件。 本标准适用于在制造厂内总装的固定式发电用汽轮机。

General assembly specifications for steam turbines

JB/T 9638-1999 汽轮机用联轴器等重要锻件 技术条件

　　本标准规定了汽轮机重要锻件的技术要求。 本标准适用于汽轮机用联轴器、中间套筒、中间轴、汽封套筒、齿轮环和环形重要锻件。

Vital forging specifications of coupling for steam turbine

JB/T 9559-1999 工业汽轮机用挠性联轴器

　　本标准规定了工业汽轮机用齿式联轴器、膜片式联轴器等挠性联轴器的设计、承载零件的材料、制造质量的控制，检验和选用等基本要求。 本标准适用于工业汽轮机等中、高速机械联接两轴、传递运动和动力并对所联两轴轴线间相对的轴向、径向和角向位移需有一定补偿性能的场合。

Flexible coupling for industrial steam turbine

JB/T 9629-1999 汽轮机承压件 水压试验技术条件

　　本标准规定了汽轮机需要进行水压试验的主要部件、水压试验要求和试验结果的判定。 本标准适用于汽轮机承压件的水压试验。

Hydrostatic tests for steam turbine pressure parts

JB/T 9628-1999 汽轮机叶片 磁粉探伤方法

　　本标准规定了汽轮机叶片的湿法磁粉探伤。 本标准适用于检测叶片表面及近表面的裂纹、发纹及其它缺陷。

Method of magnetic particle inspection of steam turbine blades

JB/T 9627-1999 汽轮机组成套供应范围

　　本标准规定了汽轮机组成套供应范围。 本标准适用于发电用的汽轮机组，其它用途的汽轮机组也可参考使用。

Scope of supply of steam turbine sets

JB/T 9630.2-1999 汽轮机铸钢件 超声波探伤及质量分级方法

　　本标准规定了A型脉冲反射式超声波探伤及对缺陷进行分级的方法。 本标准适用于容量大于或等于12MW电站汽轮机用铸钢件。 采用本标准时，必须提供铸钢件的超声波探伤用图，图中应注明要求探伤的部位和相应的质量等级。

Ultrasonic testing and quality classification methods of steel castings for steam turbines

JB/T 9630.1-1999 汽轮机铸钢件 磁粉探伤及质量分级方法

　　本标准规定了铸钢件的磁粉探伤及对缺陷进行分级的方法。 本标准适用于汽轮机用主要铸钢件的表面及近表面缺陷的检验和质量等级的评定。 采用本标准时，必须提供铸钢件的磁粉探伤图，图中应注明要求探伤的部位和相应的质量等级。

Magnetic partical testing and quality classification methods of steel castings for steam turbines

JB/T 9631-1999 汽轮机铸铁件 技术条件

　　本标准规定了铸铁件的技术要求、试验方法与检验规则、标志与质量证明书、防护与包装贮运。 本标准适用于砂型铸造的汽轮机用的灰铸铁件和球墨铸铁件。

Cast iron components of steam turbines

JB/T 8189-1999 汽轮机.金属高温裂纹开裂和扩展速率试验方法

　　本标准规定了汽轮机金属高温裂纹开裂和扩展速率试验方法。 本标准适用于确定汽轮机金属材料试样在高温长期应力下的缺口蠕变、高温疲劳和蠕变-疲劳交互作用的裂纹开裂和扩展速度的试验方法。

Testing method for crack initiation and propagation rate in steam turbine metals at elevates temperature

JB/T 8190-1999 高压加热器.技术条件

　　本标准规定了“U 形管管板式”和“螺旋管—集箱式”高压加热器产品性能的要求。 本标准适用于火力发电厂汽轮机回热系统中管侧设计压力为6～45MP，设计温度不高于350℃；壳侧设计压力不高于15MPa，设计温度不高于510℃ 的“U 形管-管板式”和“螺旋管-集箱式”高压加热器产品性能的评定，也适用于相类似的疏水冷却器产品性能的评定。

Specifications for high pressure feedwater heaters

ANSI/ISA 77.42.01-1999 火电厂给水控制系统.滚筒式

The standard is intended to assist in the development of design specifications covering the measurement and control of feedwater systems in boilers with steaming capacities of 200, 000 lb/h (25 kg/s) or greater. The safe physical containment of the feedwater shall be in accordance with applicable piping codes and standards and is beyond the scope of this standard.

Fossil Fuel Plant Feedwater Control System - Drum Type

ANSI/ISA 77.13.01-1999 火电厂汽轮机旁路系统

Establishes the applicable code requirements and boundaries for the design and installation of instrument-sensing lines interconnecting nuclear safety-related power plant processes with both nuclear safety-related and non-nuclear safety-related instrumentation. Covers design, protection, and installation of nuclear safety-related instrument sensing lines for light water-cooled nuclear power plants and covers the pressure boundary requirements for sensing lines up to and including 1-inch (25.4-mm) outside diameter or three-quater-inch nominal pipe.

Fossil Fuel Power Plant Steam Turbine Bypass System

DIN EN 45510-5-1:1998 发电厂设备的购置说明.第5-1部分:蒸汽轮机

The document gives guidance on writing the technical specification for the procurement of steam turbines to be installed in electrical power plants.

Guide for procurement of power station equipment - Part 5-1: Steam turbines; German version EN 45510-5-1:1998

BS EN 45510-5-1:1998 发电站设备采购指南.正蒸汽轮机

This standard gives guidance on writing the technical specification for the procurement of steam turbines driving generators for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - reheat and non-reheat turbine; - back-pressure turbine whose exhaust will be used for process heating; - condensing turbine whose exhaust is directly connected to a condenser ; - mixed pressure turbine; - regenerative cycle turbine; - extraction turbine; - combined cycle turbine. This Guide for procurement of steam turbines has been prepared to be used with the existing European Standard EN 60045-1, it should, therefore, be read in addition and complementary to the European Standard. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Steam turbines

DL/T 650-1998 大型汽轮发电机自并励静止励磁系统.技术条件

Specification for potential source static exciter systems for large turbine generators

ASTM D4248-98(2003) 蒸气涡轮发电机润滑油系统设计的标准实施规范

The purpose of this guide for turbine generator oil systems is to ensure that: 3.1.1 Lubrication, control, and sealing will be performed satisfactorily by the oil in a manner mutually acceptable to the parties concerned. 3.1.2 Installation, cleaning, and flushing will be facilitated. 3.1.3 Satisfactory system cleanliness can be maintained. 3.1.4 Safe practices are observed.1.1 This practice is applicable to steam turbine-generator units and provides recommended practices for the design of the oil system.1.1.1 The oil system is defined as that assembly which uses and circulates the turbine-generator lubricating oil. The oil system generally includes high pressure, bearing, control, generator seal, and drain systems. The system may also include the supply and return lines for a boiler feed pump and hydraulic coupling.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Steam Turbine Generator Oil Systems

ASTM D4248-98 蒸气涡轮发电机润滑油系统设计的标准实施规范

1.1 This practice is applicable to steam turbine-generator units and provides recommended practices for the design of the oil system. 1.1.1 The oil system is defined as that assembly which uses and circulates the turbine-generator lubricating oil. The oil system generally includes high pressure, bearing, control, generator seal, and drain systems. The system may also include the supply and return lines for a boiler feed pump and hydraulic coupling. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Steam Turbine Generator Oil Systems

JB/T 50086-1997 汽轮机可靠性评定规范（内部使用）

JB/T 50086-1997 本标准非等效采用美国 ANSI/IEEE Std-762《统计评价发电设备可靠性、可用性和生产能力的术语定义》等标准。本标准在技术内容上与 JB/T 7518-94 的要求基本一致。 本标准规定了汽轮机固有可靠性的评定方法、评定指标值等。 本标准适用于汽轮机固有可靠性的评定。

Steam turbine reliability assessment specification (internal use)

DL/T 609-1996 300MW级汽轮机运行导则

Guide for 300MW grade steam turbine operation