共找到 232 条与 汽轮机及其辅助设备 相关的标准,共 16 页
Specification for steam turbines for stationary power generation
Steam turbine parameter series for power generation
本标准规定了核电三常规岛高压加热器(以下简称高加)的性能及设计要求、材料 制造、检验、验性能试验及油漆标志、包装与运输要求。 本标准适用于 U 形管式高压加热器。
Specifications for high pressure feed water heater for conventional island in nuclear power station
本标准规定了核电三常规铝低压加热器(以下简称低加)的性能及设计要求`.材料、制造、检验、验收、性能试验及油漆、标志、包装与运输要求。本标准适用于U形管式低压加热咒。
Specifications for low pressure feed water heater for conventional island in nuclear power station
Performance test code on deaerator
Performance test code on steam surface condenser
本标准规定了超超临界汽轮机用转子体锻件的订货要求、制造工艺、技术要求、检验规则和试验方法、验收和质量证明书、标志和包装。 本标准适用于超超临界汽轮机转子体锻件的订货、制造与检验。
Specification of rotor forgings for ultra-supercritical steam turbine
Specification of large-scale steam turbine-generator shafting dynamic characteristics
Specification of LSB for large air cooling steam turbine
Specifications for steam turbines in conventional island of nuclear power plant (PWR)
Specification for large air-cooled steam turbine
Rules for steam turbine thermal acceptance test—Part 4: Method D—Simplified performance test rules for steam turbine and its thermal cycle
Specifications for steam turbine used in gas-steam combined-cycle unit
Specifications for moisture separator reheaters in conventional island of nuclear power plant
GB/T 8117的本部分,也称为“改造规程”,制定了用于改造汽轮机的热力性能验证试验的补充性改造规程。本部分所给出的规定遵循GB/T 8117.2-2008中的导则,但还修改和补充了改造汽轮机的保证值以及通过热力性能验收试验来验证保证值。本部分给出了验证试验的准备、实施、计算、试验结果与保证值的比较及测量不确定度等一般原则。本部分仅适用于汽轮机设备中某些硬件改造的性能验证试验。本部分不适用于循环系统的任何改进或其他电站设备的任何改造(例如锅炉、给水加热器等)。
Rules for steam turbine thermal acceptance test.Part 3:Method C.Thermal performance verification tests of retrofitted steam turbines
本标准规定了地热发电用汽轮机(以下简称地热汽轮机)及其主要辅助设备的术语和定义、技术要求、试验和检验等的基本要求。 本标准适用于利用地热流体为工质,驱动发电机的固定式发电用汽轮机。 本标准不适用于下列地热汽轮机: a) 直接利用地热流体作工质的两相流旋转透平。 b) 利用地热流体加热低沸点有机工作流体作工质的汽轮机。
Steam turbine specification for geothermal power station
本标准规定了一般用途汽轮机设计、材料、安装、检验、试验和装运准备方面的要求。本标准还涉及到润滑油系统、仪器仪表、控制系统和辅助设备。 本标准适用于石油、石化和天然气工业一般用途汽轮机。 本标准不适用于石油、石化和天然气工业特种用途汽轮机,特种用途汽轮机采用GB/T 28574.
Petroleum,petrochemical and natural gas industries steam turbines.General-purpose applications
本标准规定了固定式发电用汽轮机(以下称汽轮机)安全监视装置的保护监视项目及其技术要求。 本标准适用于汽轮机安全监视装置的设计、配套选型与出厂调试。 其他类型汽轮机亦可参照执行。
Specification for safety monitoring devices of steam turbine
本标准规定了超临界及超临界机组的参数、术语和定义。 本标准适用于国内生产制造的额定功率为350MW、600MW、660MW的超临界机组及额定功率为600MW、660MW、1000MW的超超临界机组的参数系列。 本标准规定的超临界及超超临界机组为一次再热机组,机组参数表示方式为:新蒸汽压力/新蒸汽温度/再热蒸汽温度。
Supercritical and ultra-supercritical generating set parameter series
本标准规定了特种用途汽轮机设计、材料,安装,检验,试验和装运准备方面的要求。 本标准还涉及到润滑油系统、仪器仪表控制系统和辅助设备。 本标准适用于石油.石化和天然气上业特种用途汽轮机。 本标准不适用于石油,石化和天然气--般用途汽轮机,此类汽轮机适用GB/T28573。
Petroleum,petrochemecal and natural gas industries steam turbines.Special-purpose applications
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号