K55 水轮机及其辅助设备 标准查询与下载

ANSI/IEEE 492:1999 水力发电机运转和维护指南

General recommendations for the operations, loading, and maintenance of synchronous hydro-generators and generator/motors are covered.

Guide for Operation and Maintenance of Hydro-Generators

DIN EN 45510-6-1:1998 发电厂设备购置说明.第6-1部分:涡轮机辅助设备.除气器

Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries; deaerators; German version EN 45510-6-1:1998

DIN EN 45510-6-3:1998 发电厂设备购置说明.第6-3部分:涡轮机辅助设备.冷凝设备

The document gives guidance on writing the technical specifications for the procurement of condensers to be installed in electric power plants.

Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries; condensator plant; German version EN 45510-6-3:1998

DIN EN 45510-6-7:1998 发电厂设备购置说明.第6-7部分:涡轮机辅助设备.去湿再加热器

The document gives guidance on writing the technical specifications for the procurement of moisture separator reheaters to be installed in electric power plants.

Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries; Moisture separator reheaters; German version EN 45510-6-7:1998

DIN EN 45510-5-4:1998 发电厂设备购置说明.第5-4部分:水轮机、蓄水储能泵和泵涡轮机

The document gives guidance on writing the technical specifications for the procurement of hydraulic turbines, storage-pumps and pump-turbines to be installed in electric power plants.#,,#

Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998

DIN EN 45510-6-2:1998 发电厂设备购置说明.第6-2部分:涡轮机辅助设备.给水加热器

The document gives guidance on writing the technical specifications for the procurement of feedwater heaters to be installed in electric power plants.

Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries; feedwater heaters; German version EN 45510-6-2:1998

BS EN 45510-5-4:1998 发电站设备采购指南.水轮机、蓄水泵和水泵水轮机

This standard gives guidance on writing the technical specification for the procurement of Hydraulic Turbines, Storage Pumps and Pump-Turbines for use in electricity generating stations (hydraulic power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers the following hydraulic machines: Francis turbines, Pelton turbines, Kaplan and propeller turbines, Tubular turbines (bulb, pit, rim-generator and S-type units), Pump-turbines and Storage pumps. This Guide for procurement of hydraulic machines has been prepared to be used with the International Standard IEC 1366; it should, therefore, be read in addition and complementary to the International Standard. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for the procurement of power station equipment - Hydraulic turbines, storage pumps and pump-turbines

IEC TR3 61366-7:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第7部分:蓄能泵的技术规范指南

This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for storage pumps.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7: Guidelines for technical specifications for storage pumps

IEC TR3 61366-3:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第3部分:水斗式水轮机的技术规范指南

This Technical Report, referred to herein as "Guide", is intended to assist in the preparation of Tendering documents and Tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for Pelton turbines.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines

IEC TR3 61366-4:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第4部分:转浆式和定浆式水轮机的技术规范指南

This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for Kaplan and propeller turbines.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines

IEC TR3 61366-5:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第5部分:贯流式水轮机的技术规范指南

This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering documents and tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for tubular turbines.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5: Guidelines for technical specifications for tubular turbines

IEC TR3 61366-6:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第6部分:水泵水轮机的技术规范指南

This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for pump-turbines.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6: Guidelines for technical specifications for pump-turbines

IEC TR3 61366-1:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第1部分:总则和附录

This technical report, referred to herein as the "Guide", is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. The object of this technical report is to provide a general guide for preparation of Tendering Documents (TD) for the supply, installation and testing of hydraulic turbines, storage pumps, and pump-turbines herein referred to as hydraulic machines as defined in 2.2 of this publication. This technical report considers the case where both equipment supply and site installation are carried out by the same Contractor. In those cases where site installation is not included in the scope of work, the Tendering Documents should include supplementary provisions for site supervisory services to be provided by the equipment supply Contractor and for day-to-day interface with the site installation Contractor. Hydraulic machines for small units with power less than 5 MW and with runner/impeller diameters less than 3 m are covered in IEC 61116. These limitations are not intended to be absolute and will depend on the type of machine and on other project characteristics.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: General and annexes

IEC TR3 61366-2:1998 水轮机、蓄能泵和水泵水轮机 投标文件 第2部分:轴向辐流式水轮机技术规范指南

This technical report, referred to herein as the Guide, is intended to assist in the preparation of Tendering Documents and tendering proposals and in the evaluation of tenders for hydraulic machines. This part of IEC 61366 provides guidelines for Francis turbines.

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2: Guidelines for technical specifications for Francis turbines

BS IEC 60609-2:1998 水轮机、蓄能泵和水泵涡轮机空穴评估.水戽式水轮机的评估

This part of IEC 60609 serves as a basis for the formulation of guarantees on cavitation pitting on Pelton turbine runners and also for the measurement and evaluation of the amount of cavitation pitting on Pelton turbine runners of a given turbine, which is defined in the contract by power, specific hydraulic energy of machine (head), rotational speed, material, operation, etc. The sequence of clauses in this part of IEC 60609 is the same as in IEC 60609 (1978). The clauses on measurements and evaluation of the amount of cavitation pitting are practically identical to those of IEC 60609. Evaluation has to be based on the loss of material during a given time and under accurately defined operating conditions. Guarantees which restrict the extent of cavitation pitting and drop erosion on Pelton turbines at the end of an operating period specified in the contract are necessary when cavitation pitting is expected in all or in some operating ranges. Such guarantees should include limits for operation which are consistent with specified operating conditions.

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines

BS EN 60609-2:1998 水轮机,蓄能泵和水泵水轮机气蚀损坏的评定.水斗式水轮机的评定

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines

JB/T 8660-1997 水电机组包装、运输和保管规范

JB/T 8660-1997 本标准规定了水电机组的包装、运输和保管规范 本标准适用于水轮机组和蓄能机组的包装、运输、中转、交接验收和保管维护。 有特殊要求的则按合同执行。

Packaging, transportation and storage specifications of hydroelectric generating unit

DL/T 622-1997 立式水轮发电机弹性金属塑料推力轴瓦.技术条件

Technical specifications of elastic metal-plastic segment for thrust bearings of vertical-shaft hydrogenerators

DL/T 5071-1997 混流式水轮机分瓣转轮组装焊接.工艺导则

Technological guide for erection and welding of split runner of Francis turbine

DL/T 5070-1997 水轮机金属蜗壳安装焊接.工艺导则

Technological guide for assembly and welding of metal spiral case of turbine