K55 水轮机及其辅助设备 标准查询与下载

JB/T 56078-1996 大型水轮机产品质量分等

本标准适用于功率大于10 MW的混流式、斜流式、轴流式(贯流式参照轴流式)水斗式水轮机以及名义直径1000～8000 mm的蝴蝶阀、名义直径500～2400 mm的球形阀等产品。

Product quality classification of large hydraulic turbines

IEC 60041:1991/COR1:1996 测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验

This is Technical Corrigendum 1 to IEC 60041-1991 (Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines)

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

DL/T 583-1995 大中型水轮发电机静止整流励磁系统及装置技术条件

Specification for static commutated excitation systems and devices for large and medium hydraulic generators

JB/T 7640-1994 双击式水轮机系列型谱

本标准规定了双击式水轮机性能参数、尺寸系列及使用范围。

Double-click turbine series type spectrum

DL/T 5037-1994 轴流式水轮机埋件安装工艺导则

Guide for installation technology of embedded components of axial turbine

DL/T 5036-1994 转桨式转轮组装与试验工艺导则

Guide for assembly and test technology of runner of Kaplan turbine

DL/T 556-1994 水轮发电机组振动监测装置设置导则

Guide of vibration monitoring device setting for hydraulic turbine generator set

JB/T 56182-1994 中小型水轮机 产品质量分等

本标准规定了中小型水轮机产品的质量等级、质量要求、检测试验方法和抽样评定方法。 本标准适用于功率等于和小于10 MW的混流式、轴流式、水斗式和斜击式水轮机(贯流式可参照轴流式)及与其配套的蝶阀和球阀等产品。 本标准是考核产品质量、产品分等定级、企业升级和产品创优的依据。 产品按质量和使用性能分为合格品、一等品、优等品三个等级。

Quality grading of small and medium turbines

JB/T 7072-1993 水轮机调速器及油压装置系列型谱

本标准规定了水轮机调速器及油压装置的产品分类及系列型谱编制原则。 本标准适用于混流式、轴流式、冲击式水轮机调速器(含操作器、电子负荷调节器等)以及相配的油压装置。

Series spectrum of hydraulic turbine governor and hydraulic device

JB/T 6752-1993 中小型水轮机转轮静平衡试验规程

本标准规定了中小型水轮机转轮静平衡的平衡方法，平衡品质等级以及相应的检验方法。 本标准适用于功率等于和小于10MW的轴流式、混流式、水斗式和斜击式水轮机转轮平衡质量的检查与验收，贯流式、斜流式、双击式水轮机转轮和水泵水轮机转轮，以及飞轮，旋转油盆等水轮机旋转零部件可参照使用。

Test specification for runner static balance of small and medium size water turbine

DL 489-1992 大中型水轮发电机静止整流励磁系统及装置试验规程

Static rectification excitation system and device test procedures for large and medium hydro-generators

DL/T 490-1992 大中型水轮发电机静止整流励磁系统及装置安装、验收规程

Regulations for installation and acceptance of static rectification and excitation system and devices for large and medium-sized hydro-generators

JB/T 6310-1992 中小型轴流式混流式水轮机转轮系列型谱

本标准规定了中小型轴流式和混流式水轮机转轮系列。 本标准适用于单机容量为10MW及以下的轴流式和混流式水轮机。 本标准适用于在清水或含砂量不大的水中运行的水轮机。

Type Spectrum of Small and Medium Axial-flow Francis Turbine Runner Series

JB/T 6478-1992 水轮机、泵水轮机和蓄能泵用符号

本标准规定了水轮机、泵水轮机和蓄能泵的常用名词术语的符号。 本标准适用于编写标准、技术文件、科技文章及书刊时使用。

Symbols for hydraulic turbines, storage pumps and pump-turbines

JIS B 0119:1992 水轮机及双向旋转泵水轮机.词汇

この規格は，発電に用いる水車及びポンプ水車に関する用語及びその定義について規定する。備考1.水車とは，水がもつエネルギーを機械的エネルギーに連続して変える回転機械をいい，流水がもつ圧力水頭を主として利用する水車を反動水車(reaction water turbine)という。2. ポンプ水車とは，水車及びポンプに共用する反動水車をいう。

Hydraulic turbines and reversible pump turbines -- Vocabulary

prEN 60994-1992 液力机械(水轮机,贮水泵和水泵-水轮机)振动和脉动的现场测量指南(IEC 994-91)

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 994:1991)

IEC 60041:1991 测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验

Covers the arrangements to determine the extent to which the main contract guarantees have been satisfied. Contains the rules governing their conduct and prescribes measures to be taken if any phase of the tests is disputed. Deals with methods of computa

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

DL 444-1991 反击式水轮机气蚀损坏评定标准

Reaction turbine gas etching damage evaluation standard

NF E44-502:1991 小功率液压涡轮机.现场验收试验

Small power hydraulic turbines. Field acceptance test.

IEC 60994:1991 水力机械(水轮机、蓄能泵和水泵水轮机)振动与脉动现场测量指南

1.1.1 This guide applies to any type of reaction or impulse turbine. as well to any type of pump-turbine and storage pump, coupled to an electric generator or motor. 1.1.2 The guide covers the field ofvibration and pulsation tests referred to as standard tests. The objectives ofthe tests are as follows: Assessment of hydraulic machine design: manufacture and quality of erection from the viewpoint ofvibration**. Assessment ofthe changes of vibration behaviour during the machine life. Provision of recommendations applying to operation of unit (for instance, choice of the most appropriate transient sequences). Aid in analysing faults and break downs. 1.1.3 If it is not possible to apply the recommendations ofthe guide because ofthe construction of the hydraulic machine. or if it is not necessary to conduct some of the measurements, such items may be omitted on prior agreement between the manufacturer and the user.

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)