K61 工业电热设备 标准查询与下载

DIN EN 60676:2012 工业电加热设备.直接电弧炉试验方法(IEC 60676-2011).德文版本EN 60676-2012

Industrial electroheating equipment - Test methods for direct arc furnaces (IEC 60676:2011); German version EN 60676:2012

DIN EN 60683:2012 工业电热设备.埋弧炉试验方法(IEC 60683-2011).德文版本EN 60683-2012

Industrial electroheating equipment - Test methods for submerged-arc furnaces (IEC 60683:2011); German version EN 60683:2012

IEC 27/874/CD:2012 电热装置能效

Energy efficiency in electroheating installations

NF C79-676*NF EN 60676:2012 工业电热设备.直接电弧炉试验方法

Industrial electroheating equipment - Test methods for direct arc furnaces.

DIN EN 61307:2012 工业微波加热装置.输出功率测试方法(IEC 61307-2011)

Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011); German version EN 61307:2011

BS EN 60683:2012 工业电热设备.埋弧炉的试验方法

Industrial electroheating equipment. Test methods for submerged-arc furnaces

BS EN 60676:2012 工业电加热设备.直接电弧炉的试验方法

Industrial electroheating equipment. Test methods for direct arc furnaces

IEEE 515.1-2012 商用电阻加热示踪的试验、设计、安装和维护用IEEE标准

IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications

DIN EN 60519-6:2011 电热装置安全.第6部分:工业微波加热设备的安全规范(IEC60519-6-2011).德文版 EN 60519-6-2011

Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment (IEC 60519-6:2011); German version EN 60519-6:2011

IEC 60676:2011 工业电热设备直接电弧炉试验方法

Scope and object This International Standard specifies test procedures@ conditions and methods according to which the main parameters and the main operational characteristics of electric arc furnaces (EAF) operated either with alternating current (EAFac) or with direct current (EAFdc) with a capacity above 500 kg/heat are established. The EAF technology is also applicable to furnaces@ in which liquid metal is kept at high temperature or superheated to casting temperature (e.g. in a ladle furnace (LF)@ operated with alternating current). Test methods for some special equipment@ e.g. controlled rectifiers for EAFdc@ are covered by IEC 60146-1-1. Test methods for submerged arc furnaces (SAF) are covered by IEC 60683.

Industrial electroheating equipment - Test methods for direct arc furnaces

DIN EN 60519-1:2011 电热装置的安全性.第1部分:通用要求(IEC 60519-1-2010);德文版本EN 60519-1-2011

Safety in electroheating installations - Part 1: General requirements (IEC 60519-1:2010); German version EN 60519-1:2011

IEC 60683:2011 工业电热设备埋弧炉试验方法

Scope and object This International Standard specifies test procedures@ conditions and methods according to which the main parameters and the main operational characteristics of a submerged-arc furnace (SAF) with rated electrical power levels above 500 kVA are established. This standard is applicable to SAF with one or more electrodes. In order to determine further technical or economic assessments@ additional tests may be necessary. Tests for some special equipment for semiconductor converter controlled furnaces@ such as controlled rectifiers or controlled a.c. converters@ are covered by IEC 60146-1-1.

Industrial electroheating equipment - Test methods for submerged-arc furnaces

BS EN 61307:2011 工业微波加热装置.电源输出测定的试验方法

This International Standard specifies test methods for the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload – the microwave workload power, in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in the frequency range from 300 MHz to 300 GHz. This standard relates to industrial microwave heating equipment operating under normal load. This standard does not apply to appliances for household and similar use (covered by IEC 60335-2-25), commercial use (covered by IEC 60335-2-90) or laboratory use (covered by IEC 61010-2-010).

Industrial microwave heating installations. Test methods for the determination of power output

BS EN 60519-6:2011 电热装置的安全.工业微波加热设备的安全规范

This part of IEC 60519 is applicable to equipment using microwave energy alone or in combination with other kinds of energy for industrial heating of materials. This part is applicable to industrial microwave heating equipment operating in the frequency range 300 MHz to 300 GHz. This part does not apply to appliances for household and similar use (covered by IEC 60335-2-25), commercial use (covered by IEC 60335-2-90) or laboratory use (covered by IEC 61010-2-010).

Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment

NF C79-631:2011 电热装置的安全性.第1部分:一般要求.

Safety in electroheating installations - Part 1 : general requirements.

IEC 61307:2011 工业微波加热设备.测定输出功率的试验方法

This International Standard specifies test methods for the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload ?C the microwave workload power@ in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in the frequency range from 300 MHz to 300 GHz. This standard relates to industrial microwave heating equipment operating under normal load. This standard does not apply to appliances for household and similar use (covered by IEC 60335-2-25)@ commercial use (covered by IEC 60335-2-90) or laboratory use (covered by IEC 61010-2-010).

Industrial microwave heating installations - Test methods for the determination of power output

BS EN 60519-1:2011 电热装置的安全性.一般要求

Safety in electroheating installations. General requirements

DIN EN 746-2:2011 工业热处理设备.第2部分:燃烧和燃料处理系统的安全要求;德文版本EN 746-2-2010

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE). This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer. This European Standard covers: - fuel pipework downstream of and including the manual isolating valve; - burner(s), burner system and ignition device; - safety related control system (protective system). This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy. For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process. The pressure hazard of piping and components covered by this standard is within the limits of maximum pressure/size relationship as described in normative Annex E. This European Standard also gives the necessary requirements for the information for use. This European Standard does not cover hazards from heating generated by electricity. This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE. This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system. Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with in this standard. This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German version EN 746-2:2010

ANSI/UL 1996-2011 电气导管加热器的安全性标准

The following is being proposed: (1) Updating Clause 29.1 to align with Clause 45.2 with respect to power and/or circuit input; and (2) Moving the component requirements from Appendix A into the body of the standard.

Standard for Safety for Electric Duct Heaters

IEC 60519-6:2011 电热装置的安全性.第6部分:工业微波加热设备安全性规范

This part of IEC 60519 is applicable to equipment using microwave energy alone or in combination with other kinds of energy for industrial heating of materials. This part is applicable to industrial microwave heating equipment operating in the frequency range 300 MHz to 300 GHz.

Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment