K61 工业电热设备 标准查询与下载

ANSI/IEEE 515:2011 工业用电阻热示踪的试验、设计、安装及维护的标准

Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications

IEC 60519-1:2010 电热装置的安全性.第1部分:一般要求

This part of IEC 60519 specifies the general safety requirements applicable to industrial electroheating installations. In case these requirements differ from those of other IEC publications, an equivalent degree of safety is ensured. The requirements apply to industrial installations, intended for electroheating and electroheat based treatment technologies, with the possible use of the following equipment: – equipment for direct and indirect resistance heating; – equipment for electric resistance trace heating; – equipment for induction heating; – equipment using the effect of EM forces on liquid metals; – equipment for arc heating, including submerged arc heating; – equipment for electroslag remelting; – equipment for plasma heating; – equipment for microwave heating; – equipment for dielectric heating; – equipment for electron beam heating; – equipment for laser heating; – equipment for infrared radiation heating. This standard is not applicable for heating appliances for household (e.g. electric cooking), laboratory or medical applications or for welding equipment, if covered by other particular standards, nor does it apply to any kind of space heating. This standard refers to normal operation of industrial electroheating installations. It is intended to ensure the safety of persons also in the case of abnormal operation and when faults occur in electroheating installations. This standard presumes that the installations are operated and maintained only by personnel consisting of instructed or skilled persons, respectively. The object of this standard is to specify the general safety requirements for electroheating installations. These safety requirements concern the protection of persons and the environment against dangers of electrical origin and also against certain dangers of nonelectrical origin, common to all types of equipment and installations.

Safety in electroheating installations.Part 1: General requirements

DIN EN 746-2:2010 工业热加工工艺设备.第2部分:燃烧和燃料储运系统安全性要求.德文版本EN 746-2-2010

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems; German version EN 746-2:2010

DIN EN 60519-7 Berichtigung 1:2010 电热装置安全性规范. 第7部分: 对带电子枪的设备的特殊规定（IEC 60519-7: 2008）; 德文版本 EN 60519-7: 2008, DIN EN 60519-7 （VDE 0721-7）: 2009年08月勘误表

This corrigendum relates to the correction of unusual words as well as the correction of distoring instructions.

Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns (IEC 60519-7:2008); German version EN 60519-7:2008, Corrigendum to DIN EN 60519-7 (VDE 0721-7):2009-08

DIN EN 1547:2010 工业热加工设备.工业热加工设备及其附属处理设备的噪音试验规程.德文版本EN 1547-2001+A1-2009

This standard specifies the means to determine, declare and verify the noise emission characteristics of the industrial thermoprocessing equipment detailed in clause 4. These means cover any ancillary equipment which forms an integral part of the equipment supplied at the same time (eg charging, discharging and process handling units). This noise test code also gives requirements for installation and operating conditions for the equipment within the scope of this Standard. It also indicates the location of work stations where measurements shall be made.

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; German version EN 1547:2001+A1:2009

ANSI/UL 1030-2010 带护套的加热元件安全标准

Standard for Safety for Sheathed Type Heating Elements

ANSI/UL 2790-2010 商用焚化炉安全性标准

This re-circulation proposal provides revisions to the proposed first edition of UL 2790 proposal dated 5-14-10.

Standard for Safety for Commercial Incinerators

ANSI/ASHRAE 94.2-2010 基于热性能的带电气输入和热输出蓄热器装置的试验方法

The purpose of this standard is to provide a standard procedure for determining the energy performance of electrically charged thermal energy storage devices used in heating systems.

Method of Testing Thermal Storage Devices with Electrical Input and Thermal Output Based on Thermal Performance

DIN EN 60519-21:2009 电热设备安全性.第21部分:电阻加热设备的详细要求.加热和熔化玻璃设备(IEC 60519-21-2008).德文版本EN 60519-21-2009

Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment (IEC 60519-21:2008); German version EN 60519-21:2009

DIN EN 60703:2009 带有电子枪的电热装置的试验方法(IEC 60703-2008).德文版本EN 60703-2009

Test methods for electroheating installations with electron guns (IEC 60703:2008); German version EN 60703:2009

NF E32-200-3:2009 工业热加工设备.第3部分:产生和使用大气气体的安全要求

Industrial thermoprocessing equipment - Part 3 : safety requirements for the generation and use of atmosphere gases.

DIN EN 60519-7:2009 电加热设备的安全性.第7部分:具有电子枪设备的专门要求(IEC 60519-7:2008),德文版本EN 60519-7:2008

Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns (IEC 60519-7:2008); German version EN 60519-7:2008

NF C79-703*NF EN 60703:2009 带电子枪的电热设备试验方法

Test methods for electroheating installations with electron guns.

BS EN 60703:2009 带电子枪的装置电加热用试验方法

This International Standard applies to electroheating installations comprising one or more electron guns as heating source. The object of this standard is the standardization of test methods to determine the essential parameters, technical data and characteristics of electroheating installations comprising one or more electron guns. The standard does not contain a mandatory list of tests and is not restrictive. Tests may be selected from the proposed list. The specification established by agreement between the user and the manufacturer of electroheating installations can supplement these recommendations but should not be in contradiction with them.

Test methods for electroheating installations with electron guns

BS EN 60519-21:2009 电热装置安全性.耐加热设备的特殊要求.加热和融化玻璃设备

This part of IEC 60519 is applicable to indirect resistance heating equipment for the heating and melting of glass, operating in voltage bands 1 and 2. These particular requirements also apply to equipment for direct resistance heating and melting of glass by means of current introduced by electrodes passing through the charge to be heated. The object of this standard is the determination of safety requirements for both indirect and direct resistance heating equipment for the heating and melting of glass.

Safety in electroheat installations — Part 21: Particular requirements for resistance heating equipment — Heating and melting glass equipment

NF C79-637*NF EN 60519-7:2009 电热装置的安全性.第7部分:带有电子枪的装置的详细要求

Safety in electroheat installations - Part 7 : particular requirements for installations with electron guns.

BS EN 60519-7:2008 电热装置的安全性.带电子枪的设备用特殊要求

This part of IEC 60519 deals with safety of electroheat installations with electron guns. It applies to all the electroheat applications with electron guns. This standard, whilst prepared for electroheat installations with electron guns may, however, also be used for non-thermal applications with electron guns and equipment employing glow discharge systems, where applicable. This standard applies also to high-voltage sources feeding electron guns. All requirements of IEC 60519-1 apply. Additional requirements for installations covered by this part of the standard are given in Clauses 6 to 16.

Safety in electroheat installations— Part 7 — Particular requi ements for installations with electron guns

NF C79-151/A1:2008 机械安全.电敏保护设备.第1部分:一般要求和试验

Safety of machinery - Electro-sensitive protective equipment - Part 1 : general requirements and tests.

IEC 60703:2008 带有电子枪的电热设备用试验方法

This International Standard applies to electroheating installations comprising one or more electron guns as heating source. The object of this standard is the standardization of test methods to determine the essential parameters, technical data and characteristics of electroheating installations comprising one or more electron guns. The standard does not contain a mandatory list of tests and is not restrictive. Tests may be selected from the proposed list. The specification established by agreement between the user and the manufacturer of electroheating installations can supplement these recommendations but should not be in contradiction with them.

Test methods for electroheating installations with electron guns

IEC 60519-21:2008 电热装置的安全.第21部分:电阻加热设备的特殊要求.加热和熔化玻璃设备

This part of IEC 60519 is applicable to indirect resistance heating equipment for the heating and melting of glass, operating in voltage bands 1 and 2. These particular requirements also apply to equipment for direct resistance heating and melting of glass by means of current introduced by electrodes passing through the charge to be heated. The object of this standard is the determination of safety requirements for both indirect and direct resistance heating equipment for the heating and melting of glass. NOTE Extraction of liquid glass or a similar material at the extraction point is part of the production process and does not constitute part of the operation of the electroheat equipment. This standard covers the safety aspects of electrical parts also in the case when electrical heating is combined with other means of heating, for example liquid fuel heating. These requirements do not apply to equipment for direct resistance heating, where, owing to the technology used, IEC 60519-3, IEC 60519-4 and IEC 60519-8 are applicable.

Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment