K61 工业电热设备 标准查询与下载

JB/T 8195.11-2007 间接电阻炉.第11部分:RB系列罩式炉

JB/T 8195 的本部分规定了对RB系列罩式电阻炉产品（以下简称罩式炉）应达到的各项要求，包括品种规格和技术性能及订购和供货等。 本部分适用于按4.1、5.1和5.2要求设计，主要用于在自然气氛中进行钢材和铸铁等的正火和退火等处理，以及在保护气氛中进行钢或铜基合金的带卷、丝卷等的退火的罩式电阻炉。 本部分也适用于类似的罩式电阻炉，不同部分可另作规定。

Indirect resistance furnaces.Part 11: RB series bell furnaces

JB/T 8195.12-2007 间接电阻炉.第12部分:RY系列电热浴炉

JB/T 8195的本部分规定了对RY系列电热浴炉产品（以下简称浴炉）的各项要求，包括品种规格和技术性能及订购和供货等。 本部分适用于按4.1、5.1和5.2的要求设计，主要用于金属零件在盐浴、碱浴或油浴中进行热处理 加热的电热浴炉。 本部分也适用于类似的电热浴炉，如金属浴炉，不同部分可参照本部分另作规定。

Indirect resistance furnaces.Part 12: RY series electroheating bath furnace

IEC 27/581/DTS:2007 IEC 60680 TS版本1:电热和电气化学用等离子设备的试验方法

IEC 60680 TS, Ed. 1: Test methods of plasma equipment for electroheat and electrochemical applications

IEC 27/582/DTS:2007 工业和商业用电阻微量加热系统.第2部分:系统设计、安装和维护的应用指南

Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance

IEC 60519-11:2007 电热装置的安全性.第11部分:用电磁影响液体金属的装置用特殊要求

This part of IEC60519 applies to installations predominantly using the effect of electromagnetic forces on liquid metals: - installations for electromagnetic (induction) stirring or transport of liquid metals at low frequencies; - installations that influence the pouring process by an electromagnetic field; - parts directly affected by the electromagnetic stirring, transport or pouring installation. Examples of application: - stirring devices for casting machines, arc furnaces, ladles, etc.; - transport of liquid metal for emptying or filling furnaces, launders or moulds; - devices to transport liquid metal with simultaneous proportioning of the transported quantity, for example, for filling diecasting machines; - influencing the ingot surface or the pouring stream enhancing crystallization by means of an electromagnetic field during continuous casting; - sealing of mechanical gaps of melt vessels, for example, in vertical galvanizing line. This standard consists of - requirements common to installations using the effect of electromagnetic forces on liquid metals; - specific requirements for electromagnetic pouring equipment (Annex A); - specific requirements for electromagnetic equipment with lining (Annex B). NOTE When applying IEC 60519-1 in conjunction with this standard, the terms "electroheat installation" or "electroheat device" should be replaced by the term "installation using the effect of electromagnetic forces on liquid metals".

Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

ANSI/ASTM F2644:2007 商业户外加热器性能试验方法

This test method covers the heating performance and energy consumption of commercial radiant patio heaters. The food service operator can use this evaluation to select a commercial patio heater and understand its energy performance and effective heated area. This test method is applicable to commercial gas and electric radiant patio heaters. The patio heater can be evaluated with respect to the following: Energy input rate (10.2), Preheat energy consumption and time (10.3), Temperature distribution (10.4), and Effective heated area (10.4). The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for the Performance of Commercial Patio Heaters

DIN EN 62076:2007 工业电加热装置.感应槽炉和坩埚感应炉的试验方法

Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces (IEC 62076:2006); German version EN 62076:2006

DIN EN 60519-4:2007 电热设备的安全.第4部分:电弧炉设备的特殊要求

Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations (IEC 60519-4:2006); German version EN 60519-4:2006

DIN EN 62395-1:2007 工业和商业用电阻式伴热器.第1部分:总则和测试要求

Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements (IEC 62395-1:2006); German version EN 62395-1:2006

DIN EN 60519-2:2007 电热设备安全性.第2部分:电阻加热设备特殊要求

Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment (IEC 60519-2:2006); German version EN 60519-2:2006

IEC 27/579/DTS:2007 IEC 60519-5 TS版本1:电热装置的安全性.第5部分:等离子装置安全性用规范

IEC 60519-5 TS, Ed. 1: Safety in electroheat installations - Part 5: Specifications for safety in plasma installations

CSA 2.22-2007-2007 通风燃气壁炉.第5版

Vented Gas Fireplaces Fifth Edition

Vented Gas Fireplaces Fifth Edition

CSA 2.32B-2007-2007 通风燃气空间加热装.第4版

Vented Gas-Fired Space Heating Appliances Fourth Edition

Vented Gas-Fired Space Heating Appliances Fourth Edition

CSA 2.33A-2007-2007 通风燃气壁炉加热器

Vented Gas Fireplace Heaters

Vented Gas Fireplace Heaters

NF C79-664*NF EN 62076:2007 工业电加热装置.感应槽炉和坩埚感应电炉的试验方法

Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces.

CSA C828-06-2007 局部独立取暖器温控器性能的相关要求.第2版

Exigences relatives aux performances des thermostats de chauffage électrique individuel des locaux deuxième édition

Performance requirements for thermostats used with individual room electric space heating devices Second Edition;: 1978 [Superseded: CSA C273.4-M1978, CSA C273.4-M1978]

ASTM F2644-07 商业户外加热器性能标准试验方法

The energy input rate test is used to confirm that the patio heater is operating properly prior to further testing. Preheat energy and time can be useful to food service operators to manage energy demands and to know how quickly the patio heater can be ready for operation. The temperature distribution of a patio heater can be used by operators and designers to determine the most effective layout for a patio heating system. The effective heated area can be used by operators to choose a patio heater that meets their heating needs.1.1 This test method covers the heating performance and energy consumption of commercial radiant patio heaters. The food service operator can use this evaluation to select a commercial patio heater and understand its energy performance and effective heated area.1.2 This test method is applicable to commercial gas and electric radiant patio heaters.1.3 The patio heater can be evaluated with respect to the following:1.3.1 Energy input rate (10.2),1.3.2 Preheat energy consumption and time (10.3),1.3.3 Temperature distribution (10.4), and 1.3.4 Effective heated area (10.4).1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Performance of Commercial Patio Heaters

BS EN 62076:2006 工业电加热装置.感应槽炉和坩埚感应炉的试验方法

This International Standard applies to electrical installations comprising industrial induction channel furnaces and induction crucible furnaces for melting, holding and superheating. Its object is the standardization of test methods to determine the essential parameters and technical characteristics of electroheat installations comprising furnaces of the type indicated above. With the exception of the safety tests given in items a), b) and c) of 4.2.1, the list of tests given in this standard is neither mandatory nor restrictive. Tests may be selected from this list as required for the characterization and evaluation of a furnace. Additional tests may be carried out, preferably in agreement between the manufacturer and the user of the furnaces concerned.

Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces

KS C IEC 60676:2006 工业电热设备直接电弧炉试验方法

이 규격은 정격 용량이 500 kg 또는 그 이상인 산업용 3상 직접 아크로에 대해 규정하

Industrial electroheating equipment－Test methods for direct arc furnaces

KS C IEC 60680:2006 电热和电化学用等离子设备的试验方法

이 규격은 다음에 대한 시험 방법을 규정한다.a) 플라즈마 토치를 사용하는 분사, 절단

The methods of plasma equipment for electroheat applications