K64 电动工具 标准查询与下载

DIN EN 61029-1/A11:2011 便携式电动操作电动工具的安全性.第1部分:通用要求;德文版本EN 61029-1-2009/A11-2010

Safety of transportable motor-operated electric tools - Part 1: General requirements; German version EN 61029-1:2009/A11:2010

BS EN 60745-2-3:2011 手持式电动工具.安全性.磨床,抛光器和盘式砂光机的专用要求

Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders

BS EN 60745-2-3:2011+A2:2013 手持式电动工具.安全性.螺纹磨床、抛光机和盘式磨砂机的详细要求

Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders

DIN EN 60745-2-5:2011 便携式电动操作电动工具的安全性.第2-5部分:对圆锯的特殊要求(修订版IEC 60745-2-5-2010);德文版本EN 60745-2-5-2010

Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws (IEC 60745-2-5:2010, modified); German version EN 60745-2-5:2010

DIN EN 60745-1/A11:2011 手持式电动工具.安全性.第1部分:一般要求;德文版本EN 60745-1-2009/A11-2010

Hand-held motor-operated electric tools - Safety - Part 1: General requirements; German version EN 60745-1:2009/A11:2010

BS EN 60745-2-22:2011+A11:2013 手持式电动工具.安全性.切割机的详细要求

Hand-held motor-operated electric tools. Safety. Particular requirements for cut-off machines

BS EN 60745-2-22:2011 便携式电动操作电动工具.安全性.对切割机的特殊要求

This clause of Part 1 is applicable as follows: Addition: This standard applies to cut-off machines fitted with – one bonded reinforced wheel of Type 41 or Type 42, or – one or more diamond cut-off wheels with the peripheral gaps, if any, not exceeding 10 mm and with – a rated speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity and – a rated wheel capacity range of 55 mm to 410 mm. These machines are intended to cut materials such as metals, concrete, masonry, glass and tile. This standard does not apply to: – grinders, sanders, or polishers, even if they can be converted to a cut-off machine, which are covered by IEC 60745-2-3; – circular saws which are covered by IEC 60745-2-5.

Hand-held motor-operated electric tools. Safety. Particular requirements for cut-off machines

BS EN 61029-2-12:2011 便携式电动操作电动工具的安全性.对攻丝机的特殊要求

This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to pipe threading tools that create external threads by rotating either the workpiece or the cutting head.

Safety of transportable motor-operated electric tools. Particular requirements for threading machines

BS EN 61029-2-3:2011 可移式电动工具的安全.平刨和厚度刨的特定要求

This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with a maximum planing width of 330 mm. 1.2 Addition: This European Standard does not apply to planers other than transportable. NOTE Z101 EN 859 gives requirements for planers other than transportable. This European Standard does not apply to thicknessers other than transportable. NOTE Z102 EN 860 gives requirements for thicknessers other than transportable. This European Standard does not apply to planing and thicknessing machines other than transportable. NOTE Z103 EN 861 gives requirements for planing and thicknessing machines other than transportable.

Safety of transportable motor-operated electric tools. Particular requirements for planers and thicknessers

BS EN 60745-2-17:2010 手持电动工具的安全性.安全性.路由器和修剪器特定要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to routers and trimmers.

Hand-held motor-operated electric tools. Safety. Particular requirements for routers and trimmers

BS EN ISO 28927-11:2011 手持便携式电动工具.振动辐射的评估用试验方法.石工锤

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held stone hammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a stone hammer when operated in laboratory conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to engraving pens and stone hammers intended for use by stone masons (see Clause 5), driven pneumatically or by other means. It is not applicable to demolition hammers or to chipping hammers primarily intended for use on metal or in construction. NOTE To avoid confusion with the terms “power tool” and n“sierted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools. Test methods for evaluation of vibration emission. Stone hammers

DIN EN 60745-2-16:2011 手持式电动工具.安全性.第2-16部分:钉钉机的特殊要求(IEC 60745-2-16-2008,已修改);德文版本EN 60745-2-16-2010

Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers (IEC 60745-2-16:2008, modified); German version EN 60745-2-16:2010

DIN EN 60745-2-17:2011 手持式电动工具.安全性.第2-17部分:电动木铣与电动修边机的特殊要求(IEC 60745-2-17-2010,修订版);德文版本EN 60745-2-17-2010

Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010, modified); German version EN 60745-2-17:2010

BS EN ISO 28927-10:2011 手持便携式电动工具.振动辐射的评估用试验方法.冲击钻,冲击锤和冲击压碎机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action [portable rock drills, plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with an inserted tool bit. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for making holes in hard materials, such as rock and concrete. It is also applicable to breakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) and for hammers intended to work in any direction to perform riveting or chiselling work. It is not applicable to impact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack leg type rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but by an additional device). It is intended that the results be used to compare different models of the same type of machine. NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools. Test methods for evaluation of vibration emission. Percussive drills, hammers and breakers

BS EN 60745-2-16:2010 手持电动工具.安全性.敲钉器特定要求

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to tackers intended for general use. This standard does not apply to tackers intended for industrial production applications.

Hand-held motor-operated electric tools. Safety. Particular requirements for tackers

ISO 28927-10:2011 手持便携式电动工具.振动辐射的评价用试验方法.第10部分:冲击钻,冲击锤和冲击压碎机

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action [portable rock drills, plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with an inserted tool bit. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for making holes in hard materials, such as rock and concrete. It is also applicable to breakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) and for hammers intended to work in any direction to perform riveting or chiselling work. It is not applicable to impact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack leg type rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but by an additional device). It is intended that the results be used to compare different models of the same type of machine. NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers

SAE AS4786A-2011 电池供电驱动的钻头

This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or 1/2 inch chuck used general maintenance and construction where a battery powered tool is required. This document also satisfies EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer's instructions prior to use

Driver Drills, Battery Powered

IEC 60745-2-22:2011 手持式电动工具.安全性.第2-22部分:切割机的详细要求

This clause of Part 1 is applicable as follows: Addition: This standard applies to cut-off machines fitted with ?C one bonded reinforced wheel of Type 41 or Type 42@ or ?C one or more diamond cut-off wheels with the peripheral gaps@ if any@ not exceeding 10 mm and with ?C a rated speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity and ?C a rated wheel capacity range of 55 mm to 410 mm. These machines are intended to cut materials such as metals@ concrete@ masonry@ glass and tile. This standard does not apply to: ?C grinders@ sanders@ or polishers@ even if they can be converted to a cut-off machine@ which are covered by IEC 60745-2-3; ?C circular saws which are covered by IEC 60745-2-5.

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines

DIN EN ISO 11148-4:2011 手持非电动工具.安全性要求.第4部分:非旋转式冲击动力工具(ISO 11148-4-2010).德文版本EN ISO 11148-4-2010

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2010); German version EN ISO 11148-4:2010

DIN EN 61029-2-6:2011 可移式电动工具的安全.第2-6部分:带水源金刚石钻的特定要求(修改的IEC 61029-2-6-1993);德文版本EN 61029-2-6-2010

Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply (IEC 61029-2-6:1993, modified); German version EN 61029-2-6:2010